You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 6b74e48f81
Remove audio pin references in rules.mk (#14532)
2 years ago
..
keymaps Reduce firmware size in prep for #12670 (#13724) 2 years ago
v1 Remove audio pin references in rules.mk (#14532) 2 years ago
v2 Remove audio pin references in rules.mk (#14532) 2 years ago
v3 Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2 years ago
config.h [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2 years ago
dz65rgb.c [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2 years ago
dz65rgb.h [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
readme.md [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2 years ago

readme.md

DZ65RGB

A customizable 65% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZ65RGB V1,V2 and V3
  • Hardware Availability: KBDfans

There are three versions of the DZ65RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files, is31fl3731 rgbmatrix driver
  • V3: ATmega32U4 (AVR), takes .bin files, is31fl3741 rgbmatrix driver

Bootloader mode

To put in bootloader mode, hold the Esc key while plugging in the USB cable. or use reset key behind the pcb.

Making firmware

Make example for this keyboard (after setting up your build environment):

make dztech/dz65rgb/v1:default # Arm (STM32F303)
make dztech/dz65rgb/v2:default # AVR (ATmega32U4)
make dztech/dz65rgb/v3:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.