You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)
2 years ago
..
keymaps [Keyboard] Add Edda Keyboard (#13953) 2 years ago
config.h [Keyboard] Add Edda Keyboard (#13953) 2 years ago
edda.c [Keyboard] Add Edda Keyboard (#13953) 2 years ago
edda.h [Keyboard] Add Edda Keyboard (#13953) 2 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
readme.md [Keyboard] Add Edda Keyboard (#13953) 2 years ago
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2 years ago

readme.md

Edda PCB

Alice layout PCB with top mounted USB C used in Mekanisk Edda

Make example for this keyboard (after setting up your build environment):

make edda:default

Flashing example for this keyboard:

make edda:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.