You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 4791cfae1a
Remove width, height and key_count from info.json (#14274)
2 years ago
..
keymaps Increment EVE Vendor ID to be unique. 3 years ago
config.h Refactor to use led config - Part 6 (#12115) 3 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
meteor.c Refactor to use led config - Part 6 (#12115) 3 years ago
meteor.h [Keyboard] New Keyboard: EVE Meteor (#6565) 4 years ago
readme.md [Keyboard] update boot-mode method for EVE Meteor docs (#10453) 3 years ago
rules.mk Change USBasp and bootloadHID bootloaders to lowercase (#14354) 2 years ago

readme.md

EVE Meteor

60% PCB with Function Row

  • Keyboard Maintainer: MechMerlin
  • Hardware Supported: EVE Meteor
  • Hardware Availability: zFrontier

Make example for this keyboard (after setting up your build environment):

make eve/meteor:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make eve/meteor:default:flash

Reset Key: Short the two holes labeled FW_JP underneath the PCB, beside the Tab key while plugging in the keyboard.

Do not confuse this with the LED holes of the switch in the Tab position. FW_JP is not reachable from the top as the plate blocks access to it.

If your PCB does not have this circuit exposed, you must hold down the key corresponding to pins A0 and B0 on the MCU. On at least the red EVE PCB, this is the +/= key (second row, 13th column).

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.