You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)
2 years ago
..
keymaps Remove deprecated callbacks for encoders and dip switches (#13404) 2 years ago
chconf.h ChibiOS conf migrations... take 11 (#11646) 3 years ago
config.h [Keyboard] Add LED matrix and 2 layouts to hub20 (#12505) 2 years ago
halconf.h Fix up comments showing how to execute config migration. (#11621) 3 years ago
hub20.c [Keyboard] Add LED matrix and 2 layouts to hub20 (#12505) 2 years ago
hub20.h [Keyboard] Add LED matrix and 2 layouts to hub20 (#12505) 2 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 3 years ago
readme.md Add bootmagic support for hub16 and hub20 (#12257) 3 years ago
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2 years ago

readme.md

Hub20

Hub20 is a 20 key macro pad with an inbuilt USB 2.0 hub and dual rotary encoders. It can be configured to be a left / right hand numberpad, along with a 4x5 1u layout.

For more information regarding the keyboard, please visit the Hub20 Website or GitHub Repo.

Make example for this keyboard (after setting up your build environment):

make hub20:default

Flashing example for this keyboard:

make hub20:default:flash

To reset the board into bootloader mode, do one of the following:

  • Press the reset switch between the center two USB-C ports while the board is plugged in
  • Hold the top left key while connecting the USB cable (also erases persistent settings)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.