You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 6b74e48f81
Remove audio pin references in rules.mk (#14532)
2 years ago
..
keymaps Just60 Configurator layout support and thinxer keymap (#7761) 4 years ago
.noci Exclude more keyboards from CI (#11436) 3 years ago
config.h Remove `DESCRIPTION`, H-J (#11616) 3 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
just60.h [Keyboard] add Just60 keyboard (#7752) 4 years ago
readme.md [Keyboard] add Just60 keyboard (#7752) 4 years ago
rules.mk Remove audio pin references in rules.mk (#14532) 2 years ago

readme.md

Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, RESET, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.

Backlight LEDs and Bluetooth are not working yet.

Make example for this keyboard (after setting up your build environment):

make just60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.