You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
James Young 6f36eb469d
Remove unused `IS_COMMAND()` instances and Magic Key definitions (#14610)
2 years ago
..
keymaps Remove empty override functions (#14312) 2 years ago
templates Add VIA support to MxSS, plus minor tweaks (#7809) 4 years ago
config.h Remove unused `IS_COMMAND()` instances and Magic Key definitions (#14610) 2 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
mxss.c Remove empty override functions (#14312) 2 years ago
mxss.h Add VIA support to MxSS, plus minor tweaks (#7809) 4 years ago
mxss_frontled.c MxSS RGB Handler Touchup (#8105) 4 years ago
mxss_frontled.h Add VIA support to MxSS, plus minor tweaks (#7809) 4 years ago
readme.md Add VIA support to MxSS, plus minor tweaks (#7809) 4 years ago
rgblight.c Update MXSS custom rgblight and fix compilation error 3 years ago
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2 years ago

readme.md

MxSS - Polycarb 65% Kit for MX/SMK

MxSS - Polycarb 65% Kit for MX/SMK

Important Note:

This PCB supports the VIA configurator, and this is the recommended way to configure the keymap on this keyboard. Building the firmware should only be necessary if you would like to change the colours of the front LEDs in indicator mode.

For more information about the VIA configurator, see here.

Information:

  • Case: Frosted Polycarbonate, CNC milled
  • Plate: Brass, mirror-finished and electroplated
  • Weight: Same as plate
  • PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

Details:

  • 2.9 degrees angle on the case
  • Top mount plate
  • Center USB, Type-B Mini
  • MX and SMK (White and Orange) switch support
  • Holtite support
  • RGB underglow
  • 1.5kg with plate and weight

Keyboard Maintainer: MxBlue

Hardware Supported: Custom PCB, ATMega32u4

Hardware Availability: https://geekhack.org/index.php?topic=94986.0

Make example for this keyboard (after setting up your build environment):

make mxss:default

See build environment setup then the make instructions for more information.

Front LED Operation

The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.

There are 3 modes of operation:

  • FLED_OFF - Front LEDs stay off
  • FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
  • FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer

Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).

Custom Keycodes

  • FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
  • FLED_VAI - Increase front LED brightness
  • FLED_VAD - Decrease front LED brightness

Further Notes

As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.