mh
/
qmk_firmware
mirror of https://github.com/qmk/qmk_firmware/


								/*

								Copyright 2020 Yiancar


								This program is free software: you can redistribute it and/or modify

								it under the terms of the GNU General Public License as published by

								the Free Software Foundation, either version 2 of the License, or

								(at your option) any later version.


								This program is distributed in the hope that it will be useful,

								but WITHOUT ANY WARRANTY; without even the implied warranty of

								MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								GNU General Public License for more details.


								You should have received a copy of the GNU General Public License

								along with this program.  If not, see <http://www.gnu.org/licenses/>.

								*/


								#pragma once


								#include "config_common.h"


								/* Ensure we jump to bootloader if the RESET keycode was pressed */

								#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE


								/* LSE clock */

								#define STM32_LSECLK 32768


								/* USB Device descriptor parameter */

								#define VENDOR_ID       0x8968

								#define PRODUCT_ID      0x5337

								#define DEVICE_VER      0x0001

								#define MANUFACTURER    Yiancar-Designs

								#define PRODUCT         NEBULA12


								/* key matrix size */

								#define MATRIX_ROWS 4

								#define MATRIX_COLS 3


								#define MATRIX_ROW_PINS { A8, C15, A0, A1 }

								#define MATRIX_COL_PINS { A9, C13, C14 }

								// To enable debugger set A13 A14 -> A5 A7


								/* COL2ROW, ROW2COL*/

								#define DIODE_DIRECTION COL2ROW


								/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

								#define DEBOUNCE 5


								/* Ensure we jump to bootloader if the RESET keycode was pressed */

								#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE


								/* Setting up 400KHz I2C Clock for a 48MHz system clock */

								#define I2C1_SCL_PAL_MODE 1

								#define I2C1_SDA_PAL_MODE 1

								#define I2C1_TIMINGR_SCLDEL 3U

								#define I2C1_TIMINGR_SDADEL 1U

								#define I2C1_TIMINGR_SCLH 3U

								#define I2C1_TIMINGR_SCLL 9U


								/* define if matrix has ghost (lacks anti-ghosting diodes) */

								//#define MATRIX_HAS_GHOST


								/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.

								 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).

								 */

								// #define GRAVE_ESC_CTRL_OVERRIDE


								/*

								 * Force NKRO

								 *

								 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved

								 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the

								 * makefile for this to work.)

								 *

								 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)

								 * until the next keyboard reset.

								 *

								 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is

								 * fully operational during normal computer usage.

								 *

								 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)

								 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by

								 * bootmagic, NKRO mode will always be enabled until it is toggled again during a

								 * power-up.

								 *

								 */

								//#define FORCE_NKRO


								/*

								 * Magic Key Options

								 *

								 * Magic keys are hotkey commands that allow control over firmware functions of

								 * the keyboard. They are best used in combination with the HID Listen program,

								 * found here: https://www.pjrc.com/teensy/hid_listen.html

								 *

								 * The options below allow the magic key functionality to be changed. This is

								 * useful if your keyboard/keypad is missing keys and you want magic key support.

								 *

								 */


								#define WS2812_SPI SPID2 // default: SPID1

								#define WS2812_SPI_MOSI_PAL_MODE 0 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5

								#define WS2812_SPI_SCK_PAL_MODE 0

								#define WS2812_SPI_SCK_PIN B13


								#define RGB_DI_PIN B15

								#ifdef RGB_DI_PIN

								  #define RGBLED_NUM 10 /* If number is smaller, buffer updates too fast causing glitches */

								  #define RGBLIGHT_HUE_STEP 8

								  #define RGBLIGHT_SAT_STEP 8

								  #define RGBLIGHT_VAL_STEP 8

								  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */

								  #define RGBLIGHT_ANIMATIONS

								#endif


								/* Bootmagic Lite key configuration */

								#define BOOTMAGIC_LITE_ROW 0

								#define BOOTMAGIC_LITE_COLUMN 0


								/* Backlight options */


								#define RGB_BACKLIGHT_ENABLED 1


								#define RGB_BACKLIGHT_NEBULA12


								// they aren't really used if RGB_BACKLIGHT_NEBULA65 defined

								#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0

								#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0

								#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0

								#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0

								#define RGB_BACKLIGHT_USE_ISO_ENTER 0

								#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0


								// disable backlight when USB suspended (PC sleep/hibernate/shutdown)

								#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0


								// disable backlight after timeout in minutes, 0 = no timeout

								#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0


								// the default brightness

								#define RGB_BACKLIGHT_BRIGHTNESS 255


								// the default effect (RGB test)

								#define RGB_BACKLIGHT_EFFECT 6


								// the default effect speed (0-3)

								#define RGB_BACKLIGHT_EFFECT_SPEED 0


								// the default color1 and color2

								#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }

								#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }


								#define DRIVER_COUNT 1

								#define DRIVER_LED_TOTAL 16


								// These define which keys in the matrix are alphas/mods

								// Used for backlight effects so colors are different for

								// alphas vs. mods

								// Each value is for a row, bit 0 is column 0

								// Alpha=0 Mod=1

								#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000

								#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000

								#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000

								#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000

								#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000


								#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }

								#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }

								#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }

								#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }


								// Backlight config starts after VIA's EEPROM usage,

								// dynamic keymaps start after this.

								#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32


								// VIA lighting is handled by the keyboard-level code

								#define VIA_CUSTOM_LIGHTING_ENABLE

								#define VIA_QMK_RGBLIGHT_ENABLE