You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 36bc3c867e
Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633)
2 years ago
..
keymaps Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2 years ago
.noci Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2 years ago
config.h Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
readme.md Update readme files (#14172) 2 years ago
rules.mk Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633) 2 years ago
xd002.c Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2 years ago
xd002.h Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2 years ago

readme.md

xd002

xd002

2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.

Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.

  • Keyboard Maintainer: zvecr
  • Hardware Supported: xd002
  • Hardware Availability: kprepublic

Make example for this keyboard (after setting up your build environment):

make xiudi/xd002:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing

Prerequisites

git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install

On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:

sudo udevadm control --reload-rules
sudo udevadm trigger

Instructions

Reset Key: Hold down key nearest to the USB socket while plugging in the keyboard.

make xd002:default:flash

# or directly with...
micronucleus --run <firmware.hex>

Recovery