You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

2.5 KiB

Replicazeron

This is a config to run a 3dprinted keyboard controller with qmk based on this project:

https://sites.google.com/view/alvaro-rosati/azeron-keypad-diy-tutorial

Some additional and redesigned files (i.e. for the OLED-display) can be found in this repo.

Replicazeron

Gallery

Features

  • 23 keys
  • analog stick with WASD emulation
  • 5way dpad
  • 2 status LEDS
  • 6x WS2812 RGB-LED lighting

Supported MCUs

Currently configs for STM32F103 and atmega32U4 are available, but STM32 is recommended, since the atmega may run out of flash with all features enabled.

With minor adjustments to Pinconfig it should be possible to use other MCUs that are supported by QMK

Wirering

Full schematics can be found in this repo:

https://github.com/9R/replicazeron_schematics

Rows

|row| promiro gpios | promicro pin | stm32F103 gpios | color |

| 0 | B1 | 15 | B15 | red | | 1 | B3 | 14 | A8 | blue | | 2 | B2 | 16 | A9 | yellow | | 3 | B6 | 10 | A10 | brown | | 4 | B5 | 9 | A15 | orange | | 5 | B4 | 8 | B3 | green |

Columns

|col| promiro gpios | promicro pin | stm32F103 gpios | color |

| 0 | C6 | 5 | A7 | white | | 1 | D4 | 4 | A6 | grey | | 2 | D7 | 6 | A5 | violet | | 3 | E6 | 7 | A4 | grey | | 4 | F7 | A0 | B4 | white |

Analog

| promicro gpio | stm32F103 gpio | pin | color |

| GND | GND | GND | white | | VCC | VCC | VCC | red | | F4 | B1 | VRx | brown | | F5 | B0 | VRy | yellow| | | | SW | blue |

OLED

| promicro gpio | stm32F103 gpio | pin | color |

| GND | GND | GND | white | | VCC | VCC | VCC | red | | D4 | B10 | SDA | green | | C6 | B11 | SCL | yellow|