You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
40 lines
1.7 KiB
40 lines
1.7 KiB
#pragma once
|
|
|
|
#define PRODUCT_ID 0x6002
|
|
#define DEVICE_VER 0x0001
|
|
#define PRODUCT Hannah60 RGB Rev.2
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
# define RGB_DI_PIN A15
|
|
# define RGBLED_NUM 18
|
|
# define RGBLIGHT_ANIMATIONS
|
|
# define RGBLIGHT_HUE_STEP 8
|
|
# define RGBLIGHT_SAT_STEP 8
|
|
# define RGBLIGHT_VAL_STEP 8
|
|
#endif
|
|
|
|
//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0
|
|
// set to 0 for write, 1 for read (as per I2C protocol)
|
|
// The address will vary depending on your wiring:
|
|
// 0b1110100 AD <-> GND
|
|
// 0b1110111 AD <-> VCC
|
|
// 0b1110101 AD <-> SCL
|
|
// 0b1110110 AD <-> SDA
|
|
#define DRIVER_ADDR_1 0b1110100
|
|
#define DRIVER_ADDR_2 0b1110110
|
|
#define DRIVER_COUNT 2
|
|
#define DRIVER_1_LED_TOTAL 44
|
|
#define DRIVER_2_LED_TOTAL 34
|
|
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
|
|
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
|
|
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
|
|
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
|
// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
|
|
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
|
|
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
|
|
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
|
|
|
|
#if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE)
|
|
# define RGB_MATRIX_DISABLE_KEYCODES
|
|
#endif
|