qmk_firmware/keyboards/dztech/dz60rgb/keymaps/mekanist/readme.md

mekanist keymap instructions

Dev Environment setup (macOS)

1. Install Homebrew by copy pasting the following into a terminal:

   /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
   

2. Refer to the QMK macOS Instructions and install the list of tools using the brew command in terminal.

3. While in terminal, issue the following command within the directory you wish to clone qmk_firmware in.

   git clone https://github.com/qmk/qmk_firmware.git
   

Creating the mekanist dz60rgb firmware file

1. While in the qmk_firmware directory, issue the following command

   make git-submodule
   

   This will download the chibi-os submoduled needed to create firmware for ARM based boards such as the dz60rgb.

2. While in the qmk_firmware directory, issue the followng command

   make dztech/dz60rgb:mekanist
   

   This will result in a file called dztech_dz60rgb_mekanist.bin that you can flash onto your board using QMK Toolbox.