You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
James Young 67bb6e1945
RGBKB Sol 3 rev1: Configurator Data and Readme (#16798)
2 years ago
..
keymaps [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2 years ago
rev1 RGBKB Sol 3 rev1: Configurator Data and Readme (#16798) 2 years ago
.noci [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2 years ago
config.h Remove 1k USB_POLLING_INTERVAL_MS config from keyboards and default-ish keymaps (#16448) 2 years ago
halconf.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2 years ago
mcuconf.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2 years ago
readme.md RGBKB Sol 3 rev1: Configurator Data and Readme (#16798) 2 years ago
rules.mk Remove parent-relative paths from keyboards. (#16282) 2 years ago
sol3.c [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2 years ago
sol3.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2 years ago

readme.md

Sol 3

Sol 3

An extensible split keyboard with hotswap sockets and per-key RGB lighting.

  • Keyboard Maintainer: XScorpion2, RGBKB
  • Hardware Supported: RGBKB Sol 3 rev1 (STM32F303)
  • Hardware Availability: RGBKB.net

Make example for this keyboard (after setting up your build environment):

make rgbkb/sol3/rev1:default

Flashing example for this keyboard:

make rgbkb/sol3/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

To reset the board into bootloader mode, do one of the following:

  • Keycode in layout: Press the key mapped to RESET if it is available (Adjust + R by default)
  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings)