You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073)
3 months ago
..
config.h Migrate RGB Matrix config to info.json (#23000) 3 months ago
halconf.h [Keyboard] 4pplet Perk60 (#16853) 1 year ago
info.json Migrate RGB Matrix config to info.json - [0-9] (#22797) 5 months ago
mcuconf.h Migrate more F4x1 board files (#18046) 1 year ago
readme.md [Keyboard] 4pplet Perk60 (#16853) 1 year ago
rev_a.c LED drivers: update keyboard LED configs (#23073) 3 months ago
rev_a.h Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438) 1 year ago
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 11 months ago

readme.md

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.