You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
92 lines
3.0 KiB
92 lines
3.0 KiB
/* Copyright 2022 David Hoelscher, customMK
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
#pragma once
|
|
|
|
// Bonsai C4 includes Vbus sensing; derived designs that use PA9 for other purposes
|
|
// may disable Vbus sensing with #define BOARD_OTG_NOVBUSSENS 1
|
|
|
|
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
|
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
|
#endif
|
|
|
|
// FRAM configuration
|
|
#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN
|
|
# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0)
|
|
# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz
|
|
# define EXTERNAL_EEPROM_BYTE_COUNT 8192
|
|
# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip
|
|
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
|
|
#endif
|
|
|
|
// External flash configuration
|
|
#ifndef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN
|
|
# define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOB, 12)
|
|
# define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 2 // 48MHz; max supported by W25Q128JV is 133MHz
|
|
# define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte
|
|
# define EXTERNAL_FLASH_PAGE_SIZE 256
|
|
# define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase
|
|
#endif
|
|
|
|
// SPI Configuration (needed for FRAM and FLASH)
|
|
#ifndef SPI_DRIVER
|
|
# define SPI_DRIVER SPID1
|
|
#endif
|
|
#ifndef SPI_SCK_PIN
|
|
# define SPI_SCK_PIN PAL_LINE(GPIOB, 3)
|
|
#endif
|
|
#ifndef SPI_MOSI_PIN
|
|
# define SPI_MOSI_PIN PAL_LINE(GPIOB, 5)
|
|
#endif
|
|
#ifndef SPI_MISO_PIN
|
|
# define SPI_MISO_PIN PAL_LINE(GPIOB, 4)
|
|
#endif
|
|
|
|
|
|
// I2C Configuration
|
|
#ifdef CONVERT_TO_BONSAI_C4
|
|
# ifndef I2C1_SCL_PIN
|
|
# define I2C1_SCL_PIN PAL_LINE(GPIOB, 6)
|
|
# endif
|
|
# ifndef I2C1_SDA_PIN
|
|
# define I2C1_SDA_PIN PAL_LINE(GPIOB, 9)
|
|
# endif
|
|
#endif
|
|
|
|
// WS2812-style LED control on pin A10
|
|
#ifdef WS2812_DRIVER_PWM
|
|
# ifndef RGB_DI_PIN
|
|
# define RGB_DI_PIN PAL_LINE(GPIOA, 10)
|
|
# endif
|
|
# ifndef WS2812_PWM_DRIVER
|
|
# define WS2812_PWM_DRIVER PWMD1
|
|
# endif
|
|
# ifndef WS2812_PWM_CHANNEL
|
|
# define WS2812_PWM_CHANNEL 3
|
|
# endif
|
|
# ifndef WS2812_PWM_PAL_MODE
|
|
# define WS2812_PWM_PAL_MODE 1
|
|
# endif
|
|
# ifndef WS2812_DMA_STREAM
|
|
# define WS2812_DMA_STREAM STM32_DMA2_STREAM5
|
|
# endif
|
|
# ifndef WS2812_DMA_CHANNEL
|
|
# define WS2812_DMA_CHANNEL 6
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef USB_VBUS_PIN
|
|
# define USB_VBUS_PIN PAL_LINE(GPIOA, 9)
|
|
#endif
|