VBUS mod, using PB10
Split Hand Pin, using PC14
Full Duplex Serial/USART using PA3 and PA4 on USART2
PWM Audio using PB1 and TIM3 and GPT on TIM4
PWM RGB using PA1 TIM2
pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
Encoder using PA13 and PA14
SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
Pull-up resistor (22k) on PA10 to fix reset issue.
Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin.
Keyboard Maintainer: Drashna Jael're
Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor
Make example for this keyboard (after setting up your build environment):
make handwired/tractyl_manuform/5x6_right/f411:default
Flashing example for this keyboard:
make handwired/tractyl_manuform/5x6_right/f411:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.