You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan a9f1105f98
LED drivers: add support for shutdown pin (#23058)
4 months ago
..
keymaps add Skyloong/GK61_V1 keyboard (#21364) 8 months ago
config.h LED drivers: add support for shutdown pin (#23058) 4 months ago
halconf.h add Skyloong/GK61_V1 keyboard (#21364) 8 months ago
info.json Migrate RGB Matrix config to info.json - RS (#22909) 5 months ago
mcuconf.h add Skyloong/GK61_V1 keyboard (#21364) 8 months ago
readme.md add Skyloong/GK61_V1 keyboard (#21364) 8 months ago
rules.mk add Skyloong/GK61_V1 keyboard (#21364) 8 months ago
v1.c LED drivers: add support for shutdown pin (#23058) 4 months ago

readme.md

GK61

GK61

The PCB features:

  • QMK & VIA compatibility
  • RGB Matrix backlight

The following is the QMK Firmware for the Destop 60% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd

Make example for this keyboard (after setting up your build environment):

make skyloong/gk61/v1:default
make skyloong/gk61/v1:via

Flashing example for this keyboard:

make skyloong/gk61/v1:default:flash
make skyloong/gk61/v1:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available