You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
chalex 496d093fc3
[Keyboard] Add chlx ppr merro (#23014)
4 months ago
..
keymaps [Keyboard] Add chlx ppr merro (#23014) 4 months ago
config.h [Keyboard] Add chlx ppr merro (#23014) 4 months ago
info.json [Keyboard] Add chlx ppr merro (#23014) 4 months ago
readme.md [Keyboard] Add chlx ppr merro (#23014) 4 months ago
rules.mk [Keyboard] Add chlx ppr merro (#23014) 4 months ago

readme.md

ppr.merro60

ppr.merro60 PCB

  • Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility.
  • Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.
  • Additional center flex cut.
  • Meant to be manufactured in 1.2mm thickness.
  • Keyboard Maintainer: Alexander Lee
  • Hardware Supported: chlx PCB ppr.merro60.x.x.x

Make example for this keyboard (after setting up your build environment):

make chlx/ppr_merro60:default

Flashing example for this keyboard:

make chlx/ppr_merro60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter bootloader mode by any of the following options -

  • When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
  • When plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region
  • When plugged in, shorting out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)