mh
/
qmk_firmware
mirror of https://github.com/qmk/qmk_firmware/


								/*

								Copyright 2020 Sergey Vlasov <sigprof@gmail.com>

								Copyright 2022 peepeetee


								This program is free software: you can redistribute it and/or modify

								it under the terms of the GNU General Public License as published by

								the Free Software Foundation, either version 2 of the License, or

								(at your option) any later version.


								This program is distributed in the hope that it will be useful,

								but WITHOUT ANY WARRANTY; without even the implied warranty of

								MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								GNU General Public License for more details.


								You should have received a copy of the GNU General Public License

								along with this program.  If not, see <http://www.gnu.org/licenses/>.

								*/


								#pragma once


								#include "config_common.h"


								/* key matrix size */

								#define MATRIX_ROWS 9

								#define MATRIX_COLS 11


								/*

								 * Keyboard Matrix Assignments

								 *

								 * Change this to how you wired your keyboard

								 * COLS: AVR pins used for columns, left to right

								 * ROWS: AVR pins used for rows, top to bottom

								 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)

								 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)

								 *

								 * The matrix description in the vendor-supplied JSON file for kbfirmware.com

								 * had 9 columns:

								 *     { D0, D1, D2, D3, D5, D4, D6, D7, B4 }

								 * and 12 rows:

								 *     { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 }

								 * However, the row 6 was completely empty, and the pin F0 was not actually

								 * routed anywhere on the PCB, therefore this row was removed to save some

								 * resources (the EEPROM space for dynamic keymaps is especially scarce).

								 *

								 * After doing the above change, the matrix was transposed (rows and columns

								 * were swapped), because a matrix with the COL2ROW layout can be scanned much

								 * more efficiently than a matrix with the ROW2COL layout (depending on various

								 * optimizations, the difference in scan rate can be over 2 times).  Because of

								 * this, the "columns" in the matrix layout now mostly correspond to physical

								 * rows, and the "rows" have mostly vertical physical orientation.

								 */

								#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }

								#define MATRIX_COL_PINS { B7, B3, B2, B1, B0, E6, F1, F4, F5, F6, F7 }


								#define DIODE_DIRECTION COL2ROW


								#undef RGB_DI_PIN

								#define RGB_DI_PIN B6

								#ifdef RGB_MATRIX_ENABLE

								#    define DRIVER_LED_TOTAL 96 /* 16 Bottom 80 top*/

								#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value

								// RGB Matrix Animation modes. Explicitly enabled

								// For full list of effects, see:

								// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

								#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS

								#    define RGB_MATRIX_KEYPRESSES

								#    define ENABLE_RGB_MATRIX_ALPHAS_MODS

								#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

								#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT

								#    define ENABLE_RGB_MATRIX_BREATHING

								#    define ENABLE_RGB_MATRIX_BAND_SAT

								#    define ENABLE_RGB_MATRIX_BAND_VAL

								#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT

								#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL

								#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT

								#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL

								#    define ENABLE_RGB_MATRIX_CYCLE_ALL

								#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT

								#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN

								#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON

								#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN

								#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL

								#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL

								#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL

								#    define ENABLE_RGB_MATRIX_DUAL_BEACON

								#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON

								#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS

								#    define ENABLE_RGB_MATRIX_RAINDROPS

								#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS

								#    define ENABLE_RGB_MATRIX_HUE_BREATHING

								#    define ENABLE_RGB_MATRIX_HUE_PENDULUM

								#    define ENABLE_RGB_MATRIX_HUE_WAVE

								#    define ENABLE_RGB_MATRIX_PIXEL_RAIN

								#    define ENABLE_RGB_MATRIX_PIXEL_FLOW

								#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL

								// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined

								#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP

								#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN

								// enabled only if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS

								#    define ENABLE_RGB_MATRIX_SPLASH

								#    define ENABLE_RGB_MATRIX_MULTISPLASH

								#    define ENABLE_RGB_MATRIX_SOLID_SPLASH

								#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH

								#endif


								/* Bootmagic Lite key configuration: use the Esc key */

								#define BOOTMAGIC_LITE_ROW      0

								#define BOOTMAGIC_LITE_COLUMN   5


								#define ENCODERS_PAD_A { C7 }

								#define ENCODERS_PAD_B { C6 }