mh
/
qmk_firmware
mirror of https://github.com/qmk/qmk_firmware/


								/*

								Copyright 2015 Jun Wako <wakojun@gmail.com>


								This program is free software: you can redistribute it and/or modify

								it under the terms of the GNU General Public License as published by

								the Free Software Foundation, either version 2 of the License, or

								(at your option) any later version.


								This program is distributed in the hope that it will be useful,

								but WITHOUT ANY WARRANTY; without even the implied warranty of

								MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								GNU General Public License for more details.


								You should have received a copy of the GNU General Public License

								along with this program.  If not, see <http://www.gnu.org/licenses/>.

								*/


								#pragma once


								/* USB Device descriptor parameter */

								#define SERIAL_NUM          "Unavailable"


								/* Temporary solution for matrix delay */

								#define IGNORE_ATOMIC_BLOCK


								/* Avoid out-of-bounds errors when SmartEEPROM is not enabled */

								#define EEPROM_SIZE 1024


								/* MCU Port name definitions */

								#define PA 0

								#define PB 1


								/* This Shift Register expands available hardware output lines to control additional peripherals */

								/* It uses four lines from the MCU to provide 16 output lines */

								/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */

								#define SR_EXP_RCLK_PIN          B14

								/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */

								#define SR_EXP_OE_PIN            B15

								/* SERCOM port to use for Shift Register SPI */

								/* DATAOUT and SCLK must be configured to use hardware pins of this port */

								#define SPI_SERCOM               SERCOM2

								/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */

								#define SPI_DATAOUT_PIN          A12

								#define SPI_DATAOUT_MUX          2

								/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */

								#define SPI_SCLK_PIN             A13

								#define SPI_SCLK_MUX             2


								/* Debug LED (Small LED Located near MCU) */

								#define DEBUG_LED_ENABLE            1

								#define DEBUG_LED_PORT              PA

								#define DEBUG_LED_PIN               27


								/* Additional debugging ports */

								/* PCB M21 */

								#define DEBUG_PORT1_ENABLE          1

								#define DEBUG_PORT1_PORT            PB

								#define DEBUG_PORT1_PIN             3

								/* PCB M23 */

								#define DEBUG_PORT2_ENABLE          1

								#define DEBUG_PORT2_PORT            PB

								#define DEBUG_PORT2_PIN             17

								/* PCB M25 */

								#define DEBUG_PORT3_ENABLE          1

								#define DEBUG_PORT3_PORT            PA

								#define DEBUG_PORT3_PIN             20


								/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */

								/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */

								/* Feature is automatically disabled after successful boot */

								/* PCB M27 */

								#define DEBUG_BOOT_TRACING_ENABLE   1

								#define DEBUG_BOOT_TRACING_PORT     PB

								#define DEBUG_BOOT_TRACING_PIN      23


								/* USB2422 config */

								#define USB2422_ADDRESS 0x58

								#define USB2422_VENDOR_ID 0x04D8

								#define USB2422_PRODUCT_ID 0xEEC5

								#define USB2422_DEVICE_VER 0x0101

								#define USB2422_MANUFACTURER "Massdrop Inc."

								#define USB2422_PRODUCT "Massdrop Hub"

								#define USB2422_ACTIVE_PIN A18


								/*

								 * Feature disable options

								 *  These options are also useful to firmware size reduction.

								 */


								/* disable debug print */

								//#define NO_DEBUG


								/* disable print */

								//#define NO_PRINT


								/* disable action features */

								//#define NO_ACTION_LAYER

								//#define NO_ACTION_TAPPING

								//#define NO_ACTION_ONESHOT


								#define RGB_MATRIX_KEYPRESSES

								#define RGB_MATRIX_LED_PROCESS_LIMIT 15

								#define RGB_MATRIX_LED_FLUSH_LIMIT 10

								// RGB Matrix Animation modes. Explicitly enabled

								// For full list of effects, see:

								// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

								#    define ENABLE_RGB_MATRIX_ALPHAS_MODS

								#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

								#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT

								#    define ENABLE_RGB_MATRIX_BREATHING

								#    define ENABLE_RGB_MATRIX_BAND_SAT

								#    define ENABLE_RGB_MATRIX_BAND_VAL

								#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT

								#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL

								#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT

								#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL

								#    define ENABLE_RGB_MATRIX_CYCLE_ALL

								#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT

								#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN

								#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON

								#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN

								#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL

								#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL

								#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL

								#    define ENABLE_RGB_MATRIX_DUAL_BEACON

								#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON

								#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS

								#    define ENABLE_RGB_MATRIX_RAINDROPS

								#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS

								#    define ENABLE_RGB_MATRIX_HUE_BREATHING

								#    define ENABLE_RGB_MATRIX_HUE_PENDULUM

								#    define ENABLE_RGB_MATRIX_HUE_WAVE

								#    define ENABLE_RGB_MATRIX_PIXEL_RAIN

								#    define ENABLE_RGB_MATRIX_PIXEL_FLOW

								#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL

								// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined

								#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP

								#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN

								// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS

								#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS

								#    define ENABLE_RGB_MATRIX_SPLASH

								#    define ENABLE_RGB_MATRIX_MULTISPLASH

								#    define ENABLE_RGB_MATRIX_SOLID_SPLASH

								#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH


								#include "config_led.h"