9R d4913272ef replace SAFE_RANGE with QK_USER | 2 months ago | |
---|---|---|
.. | ||
common | add required includes | 2 months ago |
keymaps | Major cleanup | 2 months ago |
promicro | fix lint error | 2 months ago |
stm32f103 | Update keyboards/handwired/replicazeron/stm32f103/rules.mk | 2 months ago |
config.h | stm32: move features to info.json | 2 months ago |
info.json | Major cleanup | 2 months ago |
post_rules.mk | move feature interpretation to post_rules.mk | 2 months ago |
readme.md | improve readme.md, rehost image at imgur | 2 months ago |
replicazeron.c | Update keyboards/handwired/replicazeron/replicazeron.c | 2 months ago |
replicazeron.h | replace SAFE_RANGE with QK_USER | 2 months ago |
rules.mk | cleanup: remove default rules | 2 months ago |
This is a config to run a 3dprinted keyboard controller with qmk based on this project:
https://sites.google.com/view/alvaro-rosati/azeron-keypad-diy-tutorial
Some additional and redesigned files (i.e. for the OLED-display) can be found in this repo.
Currently configs for STM32F103 and atmega32U4 are available, but STM32 is recommended, since the atmega may run out of flash with all features enabled.
With minor adjustments to Pinconfig it should be possible to use other MCUs that are supported by QMK
Full schematics can be found in this repo:
https://github.com/9R/replicazeron_schematics
| 0 | B1 | 15 | B15 | red | | 1 | B3 | 14 | A8 | blue | | 2 | B2 | 16 | A9 | yellow | | 3 | B6 | 10 | A10 | brown | | 4 | B5 | 9 | A15 | orange | | 5 | B4 | 8 | B3 | green |
| 0 | C6 | 5 | A7 | white | | 1 | D4 | 4 | A6 | grey | | 2 | D7 | 6 | A5 | violet | | 3 | E6 | 7 | A4 | grey | | 4 | F7 | A0 | B4 | white |
| GND | GND | GND | white | | VCC | VCC | VCC | red | | F4 | B1 | VRx | brown | | F5 | B0 | VRy | yellow| | | | SW | blue |
| GND | GND | GND | white | | VCC | VCC | VCC | red | | D4 | B10 | SDA | green | | C6 | B11 | SCL | yellow|