fauxpark
519df78cdb
|
4 years ago | |
---|---|---|
.. | ||
keymaps/default | [Keyboard] Percent Skog Lite (#6882) | 4 years ago |
config.h | Set device version from config.h for V-USB boards (#7316) | 4 years ago |
info.json | [Keyboard] Percent Skog Lite (#6882) | 4 years ago |
readme.md | [Keyboard] Percent Skog Lite (#6882) | 4 years ago |
rules.mk | Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) | 4 years ago |
skog_lite.c | Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) | 4 years ago |
skog_lite.h | [Keyboard] Percent Skog Lite (#6882) | 4 years ago |
usbconfig.h | Set device version from config.h for V-USB boards (#7316) | 4 years ago |
TKL Custom Keyboard.
Keyboard Maintainer: mechmerlin
Hardware Supported: Skog Lite PCB
Hardware Availability: Kono Store
Make example for this keyboard (after setting up your build environment):
make percent/skog_lite:default
Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
Reset Key: Hold down the key located at K05
, commonly programmed as F5
while plugging in the keyboard.
Windows:
Find Device
button and ensure that your keyboard is found.Open .hex File
button and locate the .hex
file you created.Flash Device
button and wait for the process to complete.macOS:
Install homebrew by typing the following:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Install crosspack-avr
.
brew cask install crosspack-avr
Install the following packages:
brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
Place your keyboard into reset.
Flash the board by typing bootloadHID -r
followed by the path to your .hex
file.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.