9R
f162d77be9
Update keyboards/handwired/replicazeron/common/oled.h
Co-authored-by: Ryan <fauxpark@gmail.com> |
8 months ago | |
---|---|---|
.. | ||
common | Update keyboards/handwired/replicazeron/common/oled.h | 2 months ago |
keymaps | Major cleanup | 2 months ago |
promicro | Update keyboards/handwired/replicazeron/promicro/rules.mk | 2 months ago |
stm32f103 | Update keyboards/handwired/replicazeron/stm32f103/rules.mk | 2 months ago |
config.h | stm32: move features to info.json | 2 months ago |
info.json | Major cleanup | 2 months ago |
post_rules.mk | move feature interpretation to post_rules.mk | 2 months ago |
readme.md | improve readme.md, rehost image at imgur | 2 months ago |
replicazeron.c | apply suggested improvements | 2 months ago |
replicazeron.h | use VPATH to cleanup includes | 2 months ago |
rules.mk | cleanup: remove default rules | 2 months ago |
This is a config to run a 3dprinted keyboard controller with qmk based on this project:
https://sites.google.com/view/alvaro-rosati/azeron-keypad-diy-tutorial
Some additional and redesigned files (i.e. for the OLED-display) can be found in this repo.
Currently configs for STM32F103 and atmega32U4 are available, but STM32 is recommended, since the atmega may run out of flash with all features enabled.
With minor adjustments to Pinconfig it should be possible to use other MCUs that are supported by QMK
Full schematics can be found in this repo:
https://github.com/9R/replicazeron_schematics
| 0 | B1 | 15 | B15 | red | | 1 | B3 | 14 | A8 | blue | | 2 | B2 | 16 | A9 | yellow | | 3 | B6 | 10 | A10 | brown | | 4 | B5 | 9 | A15 | orange | | 5 | B4 | 8 | B3 | green |
| 0 | C6 | 5 | A7 | white | | 1 | D4 | 4 | A6 | grey | | 2 | D7 | 6 | A5 | violet | | 3 | E6 | 7 | A4 | grey | | 4 | F7 | A0 | B4 | white |
| GND | GND | GND | white | | VCC | VCC | VCC | red | | F4 | B1 | VRx | brown | | F5 | B0 | VRy | yellow| | | | SW | blue |
| GND | GND | GND | white | | VCC | VCC | VCC | red | | D4 | B10 | SDA | green | | C6 | B11 | SCL | yellow|