You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
EnviousData 391c0428c9
[Keyboard] Add support for EnviousDesign keyboards (#17544)
8 months ago
..
keymaps [Keyboard] Add support for EnviousDesign keyboards (#17544) 8 months ago
info.json [Keyboard] Add support for EnviousDesign keyboards (#17544) 8 months ago
readme.md [Keyboard] Add support for EnviousDesign keyboards (#17544) 8 months ago
rules.mk [Keyboard] Add support for EnviousDesign keyboards (#17544) 8 months ago

readme.md

EnvKB 65M

image of EnvKB 65M PCB

A low cost 65% kit featuring split space and an attempt at fitting a standard keycap set.

Make example for this keyboard (after setting up your build environment):

make enviousdesign/65m:default

Flashing example for this keyboard:

make enviousdesign/65m:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  • Physical reset: Hold down the BOOTSEL button on the Pi Pico, then either plug the board in or press the RESET button.
  • Keycode in layout: Press the key mapped to QK_BOOT. In the pre-supplied keymaps it is on the second layer, replacing the Control key in the bottom-left.

After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.