You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 3bf01bb9ed
Move QMK LUFA bootloader config to data driven (#19879)
1 year ago
..
keymaps Remove legacy Grave Escape keycodes (#18787) 1 year ago
config.h Move QMK LUFA bootloader config to data driven (#19879) 1 year ago
info.json Move QMK LUFA bootloader config to data driven (#19879) 1 year ago
just60.h move @yangdigi 's keyboards to a YDKB folder (#15681) 2 years ago
readme.md Revert RESET-> QK_BOOT in Read Me files where applicable (#19262) 1 year ago
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 1 year ago

readme.md

Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, RESET, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.

Backlight LEDs and Bluetooth are not working yet.

Make example for this keyboard (after setting up your build environment):

make ydkb/just60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.