|
|
- ## Getac T800 G2
-
- Hardware Probe Info - https://linux-hardware.org/?probe=fe815f3c1f (Debian)
-
- ### Install Latest Kernel
-
- Touch screen kernel modules are missing in 5.14 kernel(Used by Redhat 9.2),upgrade the kernel to 6.x to enable and install touchscreen on Getac T800 G2.
- ```
- $ uname -a
- Linux localhost.localdomain 5.14.0-284.11.1.el9_2.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Apr 12 10:45:03 EDT 2023 x86_64 x86_64 x86_64 GNU/Linux
- ```
-
- #### Enable and install ELRepo
-
- ELRepo is an RPM repository for Enterprise Linux Packages.ELRepo supports Redhat and redhat based distributions.
-
- Import the public and install the ELrepo RPM using the below command.
- ```
- $ sudo rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
- $ sudo dnf install https://www.elrepo.org/elrepo-release-9.el9.elrepo.noarch.rpm
- ```
-
- #### Install the latest stable mainline stable kernel
-
- ```
- $sudo dnf --enablerepo=elrepo-kernel install kernel-ml
- ```
- After installing the latest kernel verify the kernel version by entering the following command, and for changes to reflect reboot the system.
- ```
- $ sudo grubby --default-kernel
- /boot/vmlinuz-6.5.6-1.el9.elrepo.x86_64
- ```
-
- ### Installing eGTouch Driver .
-
- ```
- $ git clone https://sovran.dev/vinay/getac-rugged.git
- $ cd getac-rugged/eGTouch_v2.5.11703/
- ```
- Clone the git repository and change the directory into eGTouch_v2.5.11703 and run the setup script
-
- ```
- $ sudo ./setup.sh
- ```
-
- ### References
-
- [1] https://wiki.crowncloud.net/?How_to_Install_Kernel_6_x_on_RockyLinux_9
- [2] https://support.getac.com/Service/F0021/Index#tab4
- [3] https://www.eeti.com/drivers_Linux.html
- [4] https://forums.rockylinux.org/t/getac-t800-g2-egalaxtouch-driver-installation/11447
-
|
