Browse Source

Added sponsoring link.

pull/17/head
Maurice Makaay 3 years ago
committed by GitHub
parent
commit
43a249ba8d
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 10 additions and 10 deletions
  1. +10
    -10
      README.md

+ 10
- 10
README.md View File

@ -7,33 +7,33 @@ the color of the light and a slider that can be used to change the
brightness of the light. brightness of the light.
This project provides a custom component for ESPHome, which makes it This project provides a custom component for ESPHome, which makes it
possible to fully control every aspect of the lamp.
possible to fully control every aspect of the lamp and to integrate the
lamp in your Home Assistant setup.
## Quick start guide ## Quick start guide
For those who have experience with flashing ESPHome onto devices, here's a
quick start guide:
For those who have experience with flashing ESPHome onto devices:
* Clone the [GitHub repo](https://github.com/mmakaay/esphome-xiaomi_bslamp2) * Clone the [GitHub repo](https://github.com/mmakaay/esphome-xiaomi_bslamp2)
into your ESPHome `config/custom_components` directory. into your ESPHome `config/custom_components` directory.
* Copy `config/custom_components/xiaomi_bslamp2/doc/example.yaml` to
`config/your_device_name.yaml` and modify it to your needs.
* Copy `[doc/example.yaml](doc/example.yaml)` to `config/your_device_name.yaml`.
* Modify the configuration to your needs (see the [configuration guide](doc/configuration.md)]).
* Compile the `firmware.bin` file and download it to the device to which you * Compile the `firmware.bin` file and download it to the device to which you
have connected a serial to USB adapter (FTDI).
have connected your serial to USB adapter (FTDI).
* Open up the lamp and connect its `TX`, `RX`, `GND` and `GPIO0` debug pads * Open up the lamp and connect its `TX`, `RX`, `GND` and `GPIO0` debug pads
to the serial adapter (see the [detailed installation
guide](doc/install.md) for the debug pad locations).
to the serial adapter (see the [installation
guide](doc/installation.md) for the debug pad locations).
* Power up the lamp with `GPIO0` connected to GND to enable flashing mode. * Power up the lamp with `GPIO0` connected to GND to enable flashing mode.
* Flash `firmware.bin` onto the device. * Flash `firmware.bin` onto the device.
If you experience regular disconnects between Home Assistant and the lamp, If you experience regular disconnects between Home Assistant and the lamp,
then take a look at the [known issues document](doc/known_issues.md). then take a look at the [known issues document](doc/known_issues.md).
## Table of contents:
## Table of contents
* [Why custom firmware?](doc/why_custom_firmware.md) * [Why custom firmware?](doc/why_custom_firmware.md)
* [Installation guide](doc/installation.md) * [Installation guide](doc/installation.md)
* [Configuration_guide](doc/configuration.md) * [Configuration_guide](doc/configuration.md)
* [Flashing guide](doc/flashing.md) * [Flashing guide](doc/flashing.md)
* [Known issues](doc/known_issues.md) * [Known issues](doc/known_issues.md)
* [Sponsoring](doc/sponsoring.md)

Loading…
Cancel
Save