Browse Source

Add info about flashing to different chip types

pull/64/head
Tom Schlenkhoff 5 years ago
committed by Martin Kepplinger
parent
commit
5d858c6cd0
1 changed files with 1 additions and 0 deletions
  1. +1
    -0
      x230/README.md

+ 1
- 0
x230/README.md View File

@ -185,6 +185,7 @@ based supply for a second USB port (like [this](https://de.aliexpress.com/item/1
#### side note #### side note
Flashing and reading with low speeds takes time. Be patient. E.g. unlocking the bottom chip with its two reads, one write and one verify step usually takes approximately one hour in total. Flashing and reading with low speeds takes time. Be patient. E.g. unlocking the bottom chip with its two reads, one write and one verify step usually takes approximately one hour in total.
If you need to configure the -c option when flashing top- or bottom-chip it may well be that different chips are used. So, it may be neccessary to e.g. configure _external_install_bottom_ with the _-c EN25QH64_ option, but when flashing the top-chip it only works without _-c_ or with a different chip.
#### ifd unlock and me_cleaner: the 8MB chip #### ifd unlock and me_cleaner: the 8MB chip
The [Intel Management Engine](https://en.wikipedia.org/wiki/Intel_Management_Engine) The [Intel Management Engine](https://en.wikipedia.org/wiki/Intel_Management_Engine)


Loading…
Cancel
Save