Homogenize board names and build flags

code/espurna/config/hardware.h

@@ -95,7 +95,7 @@
 #elif defined(ITEAD_SONOFF_BASIC)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_BASIC"
 
     // Buttons
@@ -114,7 +114,7 @@
 #elif defined(ITEAD_SONOFF_RF)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_RF"
 
     // Buttons
@@ -133,7 +133,7 @@
 #elif defined(ITEAD_SONOFF_TH)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_TH"
 
     // Buttons
@@ -152,7 +152,7 @@
 #elif defined(ITEAD_SONOFF_SV)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_SV"
 
     // Buttons
@@ -171,7 +171,7 @@
 #elif defined(ITEAD_SLAMPHER)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SLAMPHER"
 
     // Buttons
@@ -190,7 +190,7 @@
 #elif defined(ITEAD_S20)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "S20"
 
     // Buttons
@@ -209,7 +209,7 @@
 #elif defined(ITEAD_SONOFF_TOUCH)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_TOUCH"
 
     // Buttons
@@ -228,7 +228,7 @@
 #elif defined(ITEAD_SONOFF_POW)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_POW"
 
     // Buttons
@@ -253,7 +253,7 @@
 #elif defined(ITEAD_SONOFF_DUAL)
 
     // Info
-    #define MANUFACTURER            "ITEAD_STUDIO"
+    #define MANUFACTURER            "ITEAD"
     #define DEVICE                  "SONOFF_DUAL"
     #define SERIAL_BAUDRATE         19230
     #define RELAY_PROVIDER          RELAY_PROVIDER_DUAL
@@ -271,7 +271,7 @@
 #elif defined(ITEAD_SONOFF_4CH)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_4CH"
 
     // Buttons
@@ -308,7 +308,7 @@
 #elif defined(ITEAD_SONOFF_4CH_PRO)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_4CH_PRO"
 
     // Buttons
@@ -354,7 +354,7 @@
     // without problem.
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "1CH_INCHING"
 
     // Buttons
@@ -373,7 +373,7 @@
 #elif defined(ITEAD_MOTOR)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "MOTOR"
 
     // Buttons
@@ -389,11 +389,11 @@
     #define LED1_PIN            13
     #define LED1_PIN_INVERSE    1
 
-#elif defined(ITEAD_BN_SZ01)
+#elif defined(ITEAD_BNSZ01)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
-    #define DEVICE              "BN-SZ01"
+    #define MANUFACTURER        "ITEAD"
+    #define DEVICE              "BNSZ01"
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
     #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
     #define DUMMY_RELAY_COUNT   1
@@ -409,7 +409,7 @@
 #elif defined(ITEAD_SONOFF_RFBRIDGE)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_RFBRIDGE"
     #define SERIAL_BAUDRATE     19200
     #define RELAY_PROVIDER      RELAY_PROVIDER_RFBRIDGE
@@ -429,7 +429,7 @@
 #elif defined(ITEAD_SONOFF_B1)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_B1"
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
     #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY9192
@@ -442,7 +442,7 @@
 #elif defined(ITEAD_SONOFF_LED)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_LED"
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
     #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
@@ -462,7 +462,7 @@
 #elif defined(ITEAD_SONOFF_T1_1CH)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_T1_1CH"
 
     // Buttons
@@ -481,7 +481,7 @@
 #elif defined(ITEAD_SONOFF_T1_2CH)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_T1_2CH"
 
     // Buttons
@@ -508,7 +508,7 @@
 #elif defined(ITEAD_SONOFF_T1_3CH)
 
     // Info
-    #define MANUFACTURER        "ITEAD_STUDIO"
+    #define MANUFACTURER        "ITEAD"
     #define DEVICE              "SONOFF_T1_3CH"
 
     // Buttons
@@ -598,7 +598,7 @@
 #elif defined(AITHINKER_AI_LIGHT)
 
     // Info
-    #define MANUFACTURER        "AI_THINKER"
+    #define MANUFACTURER        "AITHINKER"
     #define DEVICE              "AI_LIGHT"
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
     #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY9192
@@ -615,7 +615,7 @@
 #elif defined(MAGICHOME_LED_CONTROLLER)
 
     // Info
-    #define MANUFACTURER        "MAGIC_HOME"
+    #define MANUFACTURER        "MAGICHOME"
     #define DEVICE              "LED_CONTROLLER"
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
     #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
@@ -674,7 +674,7 @@
 #elif defined(JANGOE_WIFI_RELAY_NC)
 
     // Info
-    #define MANUFACTURER        "JAN_GOEDEKE"
+    #define MANUFACTURER        "JANGOE"
     #define DEVICE              "WIFI_RELAY_NC"
 
     // Buttons
@@ -697,7 +697,7 @@
 #elif defined(JANGOE_WIFI_RELAY_NO)
 
     // Info
-    #define MANUFACTURER        "JAN_GOEDEKE"
+    #define MANUFACTURER        "JANGOE"
     #define DEVICE              "WIFI_RELAY_NO"
 
     // Buttons
@@ -726,7 +726,7 @@
 #elif defined(JORGEGARCIA_WIFI_RELAYS)
 
     // Info
-    #define MANUFACTURER        "JORGE_GARCIA"
+    #define MANUFACTURER        "JORGEGARCIA"
     #define DEVICE              "WIFI_RELAYS"
 
     // Relays

code/ota_flash.sh

@@ -157,7 +157,7 @@ if [ "$board" == "" ]; then
 fi
 
 if [ "$ip" == "" ]; then
-    read -p "IP of the device to flash: " -e -i 192.168.1.4 ip
+    read -p "IP of the device to flash: " -e -i 192.168.4.1 ip
 fi
 
 if [ "$ip" == "" ]; then
@@ -176,11 +176,11 @@ fi
 read -p "Environment to build: " -e -i "esp8266-1m-ota" env
 
 echo
-echo "IP    = $ip"
-echo "BOARD = $board"
-echo "AUTH  = $auth"
-echo "FLAGS = $flags"
-echo "ENV   = $env"
+echo "ESPURNA_IP    = $ip"
+echo "ESPURNA_BOARD = $board"
+echo "ESPURNA_AUTH  = $auth"
+echo "ESPURNA_FLAGS = $flags"
+echo "ESPURNA_ENV   = $env"
 
 echo
 echo -n "Are these values corrent [y/N]: "
@@ -190,9 +190,9 @@ if [ "$response" != "y" ]; then
     exit
 fi
 
-export IP=$ip
-export BOARD=$board
-export AUTH=$auth
-export FLAGS=$flags
+export ESPURNA_IP=$ip
+export ESPURNA_BOARD=$board
+export ESPURNA_AUTH=$auth
+export ESPURNA_FLAGS=$flags
 
 pio run -e $env -t upload

code/platformio.ini

@@ -4,7 +4,7 @@ src_dir = espurna
 data_dir = espurna/data
 
 [common]
-build_flags = -g -DMQTT_MAX_PACKET_SIZE=400 ${env.FLAGS}
+build_flags = -g -DMQTT_MAX_PACKET_SIZE=400 ${env.ESPURNA_FLAGS}
 debug_flags = -DDEBUG_ESP_CORE -DDEBUG_ESP_SSL -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
 build_flags_512k = ${common.build_flags} -Wl,-Tesp8266.flash.512k0.ld
 build_flags_1m = ${common.build_flags} -Wl,-Tesp8266.flash.1m0.ld
@@ -723,6 +723,29 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
+[env:huacanxing-h802]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H802 -DDEBUG_PORT=Serial1
+monitor_baud = 115200
+
+[env:huacanxing-h802-ota]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H802 -DDEBUG_PORT=Serial1
+upload_speed = 115200
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+
 [env:itead-bnsz01]
 platform = espressif8266
 framework = arduino
@@ -730,7 +753,7 @@ board = esp8285
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DITEAD_BN_SZ01
+build_flags = ${common.build_flags_1m} -DITEAD_BNSZ01
 monitor_baud = 115200
 
 [env:itead-bnsz01-ota]
@@ -740,7 +763,7 @@ board = esp8285
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DITEAD_BN_SZ01
+build_flags = ${common.build_flags_1m} -DITEAD_BNSZ01
 upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
@@ -803,10 +826,10 @@ board = esp8285
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -D${env.BOARD}
+build_flags = ${common.build_flags_1m} -D${env.ESPURNA_BOARD}
 upload_speed = 115200
-upload_port = "${env.IP}"
-upload_flags = --auth=${env.AUTH} --port 8266
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 
 [env:esp8266-1m-ota]
 platform = espressif8266
@@ -815,10 +838,10 @@ board = esp01_1m
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -D${env.BOARD}
+build_flags = ${common.build_flags_1m} -D${env.ESPURNA_BOARD}
 upload_speed = 115200
-upload_port = "${env.IP}"
-upload_flags = --auth=${env.AUTH} --port 8266
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 
 [env:esp8266-4m-ota]
 platform = espressif8266
@@ -827,30 +850,7 @@ board = esp12e
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags} -D${env.BOARD}
+build_flags = ${common.build_flags} -D${env.ESPURNA_BOARD}
 upload_speed = 115200
-upload_port = "${env.IP}"
-upload_flags = --auth=${env.AUTH} --port 8266
-
-[env:huacanxing-h802]
-platform = espressif8266
-framework = arduino
-board = esp01_1m
-board_flash_mode = dout
-lib_deps = ${common.lib_deps}
-lib_ignore = ${common.lib_ignore}
-build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H802 -DDEBUG_PORT=Serial1
-monitor_baud = 115200
-
-[env:huacanxing-h802-ota]
-platform = espressif8266
-framework = arduino
-board = esp01_1m
-board_flash_mode = dout
-lib_deps = ${common.lib_deps}
-lib_ignore = ${common.lib_ignore}
-build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H802 -DDEBUG_PORT=Serial1
-upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
-monitor_baud = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266