Merge pull request #847 from gn0st1c/dev

tonbux mosquito killer support

README.md

@@ -243,10 +243,15 @@ Here is the list of supported hardware. For more information please refer to the
 |**Heltec Touch Relay**|**Generic Relay v4.0**|**Generic RGBLed v1.0**|
 |![Generic DHT11 v1.0](images/devices/generic-dht11-10.jpg)|![Generic DS18B20 v1.0](images/devices/generic-ds18b20-10.jpg)||
 |**Generic DHT11 v1.0**|**Generic DS18B20 v1.0**||
+|![Tonbux Mosquito Killer](images/devices/tonbux-mosquito-killer.jpg)|||
+|**Tonbux Mosquito Killer**|||
 
 **Other supported boards:**
 IteadStudio Sonoff S31, IteadStudio Sonoff POW R2, Zhilde ZLD-EU55-W, Luani HVIO
 
+**Other supported boards (beta):**
+KMC 4 Outlet, Gosund WS1, Smart Dual Plug, MakerFocus Intelligent Module LM33 for Lamps
+
 ## License
 
 Copyright (C) 2016-2018 by Xose Pérez (@xoseperez)

code/espurna/config/arduino.h

@@ -81,6 +81,7 @@
 //#define ZHILDE_EU44_W
 //#define LUANI_HVIO
 //#define ALLNET_4DUINO_IOT_WLAN_RELAIS
+//#define TONBUX_MOSQUITO_KILLER
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -2072,6 +2072,41 @@
     #define LED1_PIN                15
     #define LED1_PIN_INVERSE        0
 
+// -----------------------------------------------------------------------------
+// Tonbux 50-100M Smart Mosquito Killer USB
+// https://www.aliexpress.com/item/Original-Tonbux-50-100M-Smart-Mosquito-Killer-USB-Plug-No-Noise-Repellent-App-Smart-Module/32859330820.html
+// -----------------------------------------------------------------------------
+
+#elif defined(TONBUX_MOSQUITO_KILLER)
+
+    // Info
+    #define MANUFACTURER        "TONBUX"
+    #define DEVICE              "MOSQUITO_KILLER"
+
+    // Buttons
+    #define BUTTON1_PIN         2
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY       1
+
+    // Relays
+    #define RELAY1_PIN          5   // not a relay, fan
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
+    // LEDs
+    #define LED1_PIN            15  // blue led
+    #define LED1_PIN_INVERSE    1
+    #define LED1_MODE           LED_MODE_WIFI
+    #define LED2_PIN            14  // red led
+    #define LED2_PIN_INVERSE    1
+    #define LED2_MODE           LED_MODE_RELAY
+
+    #define LED3_PIN            12  // UV leds (1-2-3-4-5-6-7-8)
+    #define LED3_PIN_INVERSE    0
+    #define LED3_RELAY          1
+    #define LED4_PIN            16  // UV leds (9-10-11)
+    #define LED4_PIN_INVERSE    0
+    #define LED4_RELAY          1
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -937,6 +937,22 @@ void migrate() {
             setSetting("relayResetGPIO", 0, 12);
             setSetting("relayType", 0, RELAY_TYPE_LATCHED);
 
+        #elif defined(TONBUX_MOSQUITO_KILLER)
+
+            setSetting("board", 74);
+            setSetting("ledGPIO", 0, 15);
+            setSetting("ledLogic", 0, 1);
+            setSetting("ledGPIO", 1, 14);
+            setSetting("ledLogic", 1, 1);
+            setSetting("ledGPIO", 2, 12);
+            setSetting("ledLogic", 2, 0);
+            setSetting("ledGPIO", 3, 16);
+            setSetting("ledLogic", 3, 0);
+            setSetting("btnGPIO", 0, 2);
+            setSetting("btnRelay", 0, 0);
+            setSetting("relayGPIO", 0, 5);
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -2128,3 +2128,27 @@ upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 extra_scripts = ${common.extra_scripts}
+
+[env:tonbux-mosquito-killer]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DTONBUX_MOSQUITO_KILLER
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:tonbux-mosquito-killer-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DTONBUX_MOSQUITO_KILLER
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}