resolve#2368
- Fixes "undefined reference to `__atomic_fetch_add_4'"
Notably, std::atomic_fetch_add(&counter, 1) would also trigger this.
std::atomic<T>::operator+= does not allow in-place change, since it
returns T instead of T&
- Another work reduction in the isr, treat 'value' as `counter > 0`
instead of relying on the notion that we can sometimes read the value
with very low counter frequency
- Fix duplicated initializations
- Buttons events source as button property instead of a global one
- Rename events source -> provider for all settings, consistent with the other things like relay and light providers
- AnalogPin to read between a certain analogRead() range
Trying to follow defaults here - analog 'press' is digital LOW, default value is HIGH, so no additional cfg entries are needed besides pin, level and changing evt source
- (debug) Refactor gpio command, add adc to show analogRead(pin)
- (debug) Add button command
Implemented based on:
https://gitter.im/tinkerman-cat/espurna?at=5f5d44c8df4af236f902e25dhttps://gitter.im/tinkerman-cat/espurna?at=5f60e7f1f969413294e95370
Always do digitalRead() after ISR
Drop trigger, since we can handle this inside of reading routine
(although, pending some changes to make reading interval per-sensor)
Rework read / write through std::atomic
- make sure we call run() before checking for errors, we will miss status update otherwise and lock the sensor class in the error state that it cannot recover from
- set error flag only when either bsec or bme680 report an error. ensure we show any issues reported by the library via the debug log
ref. https://gitter.im/tinkerman-cat/espurna?at=5f63a955c1d1a53705abcbe3
TODO: add custom error messages through virtual method?
Also, a minor fix to the sensors test when using 1m and 2m boards
- support 32 byte hostname / ssid
- support 64 byte passphrase
- slightly reduce amount of memory allocations
- tweak initialization paths to call persistent(false) as early as possible
Provide safe fallback *only* when char is out-of-range
As it is, numeric 0 was equal to else { ... }, so 00 was never parsed.
Previously, it was assumed that we never try to parse leading / trailing zeroes,
but in turn we also ignored zeroes in the middle of the number...
* Add support for the Zhilde ZLD-64EU-W
This is a power outlet with 6 power sockets and 4 USB ports.
* fixup based on the zld-44eu hw and tasmota template info
Co-authored-by: Maxim Prokhorov <prokhorov.max@outlook.com>
trying to fix#2343
*** [.pio\build\$PIOENV\firmware.bin] TypeError
`expected str, bytes or os.PathLike object, not Dir' trying to evaluate `${__get_flash_size(__env__)}'
as it turns out, PIO platform internals (sometimes) did not use the correct ldscript path
vector will not copy when move ctor is marked noexcept
remove the copy ctor 'trick', re-add dtor. explicitly do the thing we want
(...clang-tidy would've shown this issue, something to do in the CI...)
see 69c65a6a40 (commitcomment-42008295)
Because of the way DHCP is integrated into the Core logic, we need to
call wifi_softap_add_dhcps_lease(...) inbetween WiFi.softApConfig(...) and WiFi.softAp(...)
- magnitudes vector grows by calling copy ctor, ensure filter never gets deleted
- ensure we can't use magnitude member instead of ctor arg
- more magnitude references instead of using index access
- additional checks for isnan, fix report never triggering
- drop event callback. at least for EventSensor, we already have
report with min / max value change triggers
- BaseFilter must have virtual dtor
- magnitude object is not trivial, we need to manage filter lifetime
- Ensure move also moves filter object
- Clean-up using magnitude object by value in functions
- (experimental) provide generic way to read magnitude values
- expose /api/metrics with values formatted specifically for prometheus, with relay and sensor data
- small tweaks to sensor init
Example config:
```
scrape_configs:
- job_name: 'espurna'
metrics_path: '/api/metrics'
params:
apikey: ['apikeyapikey']
static_configs:
- targets: ['espurna-blabla.lan:80']
```
Where ESPurna side has
```
apiKey => "apikeyapikey"
apiEnabled => "1"
```
ref. https://travis-ci.com/github/mcspr/espurna-nightly-builder/jobs/378203413#L698
> +env ESPURNA_FLAGS=-DGENERIC_ESP01_512KB ESPURNA_RELEASE_NAME=generic-esp01-512kb ESPURNA_BUILD_SINGLE_SOURCE=1 pio run -e esp8266-512k-base -s -t release
> /home/travis/.platformio/packages/toolchain-xtensa/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/bin/ld: .pio/build/esp8266-512k-base/firmware.elf section `.irom0.text' will not fit in region `irom0_0_seg'
Remove ~90Kb from the build.
- cache received rfbridge codes in the internal list, allow to operate on it via the rpn operators
- add `<N> <proto> <code> rfb_match`, matching when we receive specified protocol + code string at least N times
- add `<proto> <code> <proto> <code> rfb_sequence`, checking if specified protocol + code pairs happen in sequence
- add `<TIME> <N> <proto> <code> rfb_match_wait` - similar to `rfb_match`, but waiting for at least `TIME` (ms) via oneshot runner
- add `<proto> <code> rfb_info`, pushes code's latest timestamp and it's counter on the stack
- add `<proto> <code> rfb_pop`, which removes the specified protocol + code from the internal cache
- fix MQTT skip setting making RPN variables absent on initial connection
- default to no skip when receiving MQTT
(small issue still stands with us having non-clean MQTT session, broker will persist variable subscriptions even after unsubscribe event)
- build flags RF_... are renamed to RFB_...
- drop RFB_DIRECT boolean in favor of RFB_PROVIDER=..., adds RFB_PROVIDER_EFM8BB1 and RFB_PROVIDER_RCSWITCH
- rework rfbridge parser. drop serial buffering and combined processing of rcswitch / rfb data in favor of state-full parsing
- rework rcswitch integration, support variable length payload via bitlength and allow to output 64bit data via rc-switch fork from open-mqtt-gateway.
- apply bit-length comparison for the old rcswitch codes, bump cfg version to 5 to allow 1.14.1 config updates (broken on dev, since cfg setting was never updated on clean installations 😞)
- optional relay support for both, independent of mqtt
- rework settings scanning routine when trying to match rf payload with the relay ID, scan settings only once instead of relayCount()<sup>2</sup> times if we want to find something for relayCount()-1'th relay
- add broker callbacks list with proto id + stringified code. default rfbridge does not support more than one protocol, so send out ID 0 as default (which matches with what 0xa6 will show, supposedly as it does not work for me :?)
- send out 0xa6 and 0xb0 sniffer data from https://github.com/Portisch/RF-Bridge-EFM8BB1/ to the MQTT and internally via broker callback
- update receiver callback 'locking' to make sure specific relay ID is tracked instead of all at once
- update build tests and deprecation notices
Stock RFBridge & RCSwitch refactoring are closely related, so pulling all of this at once. We no longer use the same 'flow', using separate integration paths.
One sort-of breaking thing is the new internal _rfbMatch() change - we no longer update serialized 'buffer' string when matching in the receiver, thus we (very) likely send a different string to the MQTT when receiving the same device's code. This introduces non-trivial dependency on the output buffer though :/ And we don't always have relay support, so that would be another layer of preprocessor checks.
Instead, I am in favor of another option - special build / runtime setting to provide the same protocol + payload pair as new broker integration does. To simplify / make sure it is noticed, separate protocol and actual data with comma, colon (like IR) or space.
Maxim Prokhorov
imgbot[bot]
Alex. Tircovnicu
user176176
Bert Vermeulen