mh
/
mhsw-espurna


								//--------------------------------------------------------------------------------

								// Internal popwer montior

								// Enable support by passing ENABLE_VCC_REPORT=1 build flag

								//--------------------------------------------------------------------------------


								#if (MQTT_REPORTS | MQTT_VCC_REPORT)

								    ADC_MODE(ADC_VCC);

								#endif


								//--------------------------------------------------------------------------------

								// Custom RF module

								// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/

								// Enable support by passing ENABLE_RF=1 build flag

								//--------------------------------------------------------------------------------


								#define RF_PIN                  14

								#define RF_CHANNEL              31

								#define RF_DEVICE               1


								//--------------------------------------------------------------------------------

								// DHTXX temperature/humidity sensor

								// Enable support by passing ENABLE_DHT=1 build flag

								//--------------------------------------------------------------------------------


								#define DHT_PIN                 14

								#define DHT_UPDATE_INTERVAL     60000

								#define DHT_TYPE                DHT22

								#define DHT_TIMING              11

								#define DHT_TEMPERATURE_TOPIC   "/temperature"

								#define DHT_HUMIDITY_TOPIC      "/humidity"


								#define HUMIDITY_NORMAL         0

								#define HUMIDITY_COMFORTABLE    1

								#define HUMIDITY_DRY            2

								#define HUMIDITY_WET            3


								//--------------------------------------------------------------------------------

								// DS18B20 temperature sensor

								// Enable support by passing ENABLE_DS18B20=1 build flag

								//--------------------------------------------------------------------------------


								#define DS_PIN                  14

								#define DS_UPDATE_INTERVAL      60000

								#define DS_TEMPERATURE_TOPIC    "/temperature"


								//--------------------------------------------------------------------------------

								// Custom current sensor

								// Check http://tinkerman.cat/your-laundry-is-done/

								// Check http://tinkerman.cat/power-monitoring-sonoff-th-adc121/

								// Enable support by passing ENABLE_EMON=1 build flag

								//--------------------------------------------------------------------------------


								#define EMON_ANALOG_PROVIDER    0

								#define EMON_ADC121_PROVIDER    1


								// If you select EMON_ADC121_PROVIDER you need to enable and configure I2C in general.h

								#define EMON_PROVIDER           EMON_ANALOG_PROVIDER


								#if EMON_PROVIDER == EMON_ANALOG_PROVIDER

									#define EMON_CURRENT_PIN        0

									#define EMON_ADC_BITS           10

									#define EMON_REFERENCE_VOLTAGE  1.0

								    #define EMON_CURRENT_PRECISION  1

								    #define EMON_CURRENT_OFFSET     0.25

								#endif


								#if EMON_PROVIDER == EMON_ADC121_PROVIDER

									#define EMON_ADC121_ADDRESS     0x50

									#define EMON_ADC_BITS           12

									#define EMON_REFERENCE_VOLTAGE  3.3

								    #define EMON_CURRENT_PRECISION  2

								    #define EMON_CURRENT_OFFSET     0.10

								#endif


								#define EMON_CURRENT_RATIO      30

								#define EMON_SAMPLES            1000

								#define EMON_INTERVAL           10000

								#define EMON_MEASUREMENTS       6

								#define EMON_MAINS_VOLTAGE      230

								#define EMON_APOWER_TOPIC       "/apower"

								#define EMON_ENERGY_TOPIC       "/energy"

								#define EMON_CURRENT_TOPIC      "/current"


								//--------------------------------------------------------------------------------

								// HLW8012 power sensor (Sonoff POW)

								// Enable support by passing ENABLE_POW=1 build flag

								// Enabled by default when selecting SONOFF_POW hardware

								//--------------------------------------------------------------------------------


								#define POW_SEL_PIN             5

								#define POW_CF1_PIN             13

								#define POW_CF_PIN              14

								#define POW_USE_INTERRUPTS      1

								#define POW_SEL_CURRENT         HIGH

								#define POW_CURRENT_R           0.001

								#define POW_VOLTAGE_R_UP        ( 5 * 470000 ) // Real: 2280k

								#define POW_VOLTAGE_R_DOWN      ( 1000 ) // Real 1.009k

								#define POW_POWER_TOPIC         "/power"

								#define POW_CURRENT_TOPIC       "/current"

								#define POW_VOLTAGE_TOPIC       "/voltage"

								#define POW_APOWER_TOPIC        "/apower"

								#define POW_RPOWER_TOPIC        "/rpower"

								#define POW_PFACTOR_TOPIC       "/pfactor"

								#define POW_ENERGY_TOPIC        "/energy"

								#define POW_UPDATE_INTERVAL     5000

								#define POW_REPORT_EVERY        12