You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

130 lines
4.9 KiB

Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
5 years ago
  1. /* Copyright 2021 QMK
  2. *
  3. * This program is free software: you can redistribute it and/or modify
  4. * it under the terms of the GNU General Public License as published by
  5. * the Free Software Foundation, either version 2 of the License, or
  6. * (at your option) any later version.
  7. *
  8. * This program is distributed in the hope that it will be useful,
  9. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11. * GNU General Public License for more details.
  12. *
  13. * You should have received a copy of the GNU General Public License
  14. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  15. */
  16. #include <string.h>
  17. #include <debug.h>
  18. #include "transactions.h"
  19. #include "transport.h"
  20. #include "transaction_id_define.h"
  21. #include "atomic_util.h"
  22. #ifdef USE_I2C
  23. # ifndef SLAVE_I2C_TIMEOUT
  24. # define SLAVE_I2C_TIMEOUT 100
  25. # endif // SLAVE_I2C_TIMEOUT
  26. # ifndef SLAVE_I2C_ADDRESS
  27. # define SLAVE_I2C_ADDRESS 0x32
  28. # endif
  29. # include "i2c_master.h"
  30. # include "i2c_slave.h"
  31. // Ensure the I2C buffer has enough space
  32. _Static_assert(sizeof(split_shared_memory_t) <= I2C_SLAVE_REG_COUNT, "split_shared_memory_t too large for I2C_SLAVE_REG_COUNT");
  33. split_shared_memory_t *const split_shmem = (split_shared_memory_t *)i2c_slave_reg;
  34. void transport_master_init(void) {
  35. i2c_init();
  36. }
  37. void transport_slave_init(void) {
  38. i2c_slave_init(SLAVE_I2C_ADDRESS);
  39. }
  40. i2c_status_t transport_trigger_callback(int8_t id) {
  41. // If there's no callback, indicate that we were successful
  42. if (!split_transaction_table[id].slave_callback) {
  43. return I2C_STATUS_SUCCESS;
  44. }
  45. // Kick off the "callback executor", now that data has been written to the slave
  46. split_shmem->transaction_id = id;
  47. split_transaction_desc_t *trans = &split_transaction_table[I2C_EXECUTE_CALLBACK];
  48. return i2c_write_register(SLAVE_I2C_ADDRESS, trans->initiator2target_offset, split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size, SLAVE_I2C_TIMEOUT);
  49. }
  50. bool transport_execute_transaction(int8_t id, const void *initiator2target_buf, uint16_t initiator2target_length, void *target2initiator_buf, uint16_t target2initiator_length) {
  51. i2c_status_t status;
  52. split_transaction_desc_t *trans = &split_transaction_table[id];
  53. if (initiator2target_length > 0) {
  54. size_t len = trans->initiator2target_buffer_size < initiator2target_length ? trans->initiator2target_buffer_size : initiator2target_length;
  55. memcpy(split_trans_initiator2target_buffer(trans), initiator2target_buf, len);
  56. if ((status = i2c_write_register(SLAVE_I2C_ADDRESS, trans->initiator2target_offset, split_trans_initiator2target_buffer(trans), len, SLAVE_I2C_TIMEOUT)) < 0) {
  57. return false;
  58. }
  59. }
  60. // If we need to execute a callback on the slave, do so
  61. if ((status = transport_trigger_callback(id)) < 0) {
  62. return false;
  63. }
  64. if (target2initiator_length > 0) {
  65. size_t len = trans->target2initiator_buffer_size < target2initiator_length ? trans->target2initiator_buffer_size : target2initiator_length;
  66. if ((status = i2c_read_register(SLAVE_I2C_ADDRESS, trans->target2initiator_offset, split_trans_target2initiator_buffer(trans), len, SLAVE_I2C_TIMEOUT)) < 0) {
  67. return false;
  68. }
  69. memcpy(target2initiator_buf, split_trans_target2initiator_buffer(trans), len);
  70. }
  71. return true;
  72. }
  73. #else // USE_I2C
  74. # include "serial.h"
  75. static split_shared_memory_t shared_memory;
  76. split_shared_memory_t *const split_shmem = &shared_memory;
  77. void transport_master_init(void) {
  78. soft_serial_initiator_init();
  79. }
  80. void transport_slave_init(void) {
  81. soft_serial_target_init();
  82. }
  83. bool transport_execute_transaction(int8_t id, const void *initiator2target_buf, uint16_t initiator2target_length, void *target2initiator_buf, uint16_t target2initiator_length) {
  84. split_transaction_desc_t *trans = &split_transaction_table[id];
  85. if (initiator2target_length > 0) {
  86. size_t len = trans->initiator2target_buffer_size < initiator2target_length ? trans->initiator2target_buffer_size : initiator2target_length;
  87. memcpy(split_trans_initiator2target_buffer(trans), initiator2target_buf, len);
  88. }
  89. if (!soft_serial_transaction(id)) {
  90. return false;
  91. }
  92. if (target2initiator_length > 0) {
  93. size_t len = trans->target2initiator_buffer_size < target2initiator_length ? trans->target2initiator_buffer_size : target2initiator_length;
  94. memcpy(target2initiator_buf, split_trans_target2initiator_buffer(trans), len);
  95. }
  96. return true;
  97. }
  98. #endif // USE_I2C
  99. bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
  100. return transactions_master(master_matrix, slave_matrix);
  101. }
  102. void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
  103. transactions_slave(master_matrix, slave_matrix);
  104. }