- /*
- Copyright 2012 Jun Wako <wakojun@gmail.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0x4848 // HH = happy hacking
- #define PRODUCT_ID 0x0001 // ANSI HHKB
- #define DEVICE_VER 0x0104
- #define MANUFACTURER q.m.k
- #define PRODUCT HHKB mod
-
- /* key matrix size */
- #define MATRIX_ROWS 8
- #define MATRIX_COLS 8
-
- #define TAPPING_TERM 200
-
- /* number of backlight levels */
- #define BACKLIGHT_LEVELS 3
-
- /* Set 0 if debouncing isn't needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- //#define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- //#define LOCKING_RESYNC_ENABLE
-
- #ifdef HHKB_RN42_ENABLE
- // rn42 support -- acquired from the tmk repo. This is almost certainly not
- // integrated with qmk in the correct way.
-
- #define SUART_OUT_PORT PORTD
- #define SUART_OUT_BIT 0
- #define SUART_IN_PIN PIND
- #define SUART_IN_BIT 1
-
- #define SERIAL_UART_BAUD 115200
- #define SERIAL_UART_INIT_CUSTOM \
- /* RX interrupt, RX: enable */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
- /* TX interrupt, TX: enable */ \
- UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); \
- /* parity: none(00), even(01), odd(11) */ \
- UCSR1C |= (0<<UPM11) | (0<<UPM10); \
- /* RTS, CTS(no flow control by hardware) */ \
- UCSR1D |= (0<<RTSEN) | (0<<CTSEN); \
- /* RTS for flow control by firmware */ \
- DDRD |= (1<<5); PORTD &= ~(1<<5);
- #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
- #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
-
- /* power control of key switch board */
- #define HHKB_POWER_SAVING
-
- #endif
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
|