- /* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
- # if defined(KEYBOARD_planck_light)
- # define RGB_DI_PIN A0
- # define RGBLED_NUM 13 // Number of LEDs
- # endif
- # define RGBLIGHT_HUE_STEP 12
- # define RGBLIGHT_SAT_STEP 12
- # define RGBLIGHT_VAL_STEP 12
- # define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
- # define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
- # ifdef RGB_MATRIX_ENABLE
- # define RGBLIGHT_DISABLE_KEYCODES
- # endif
- #endif // RGBLIGHT_ENABLE
-
- #ifdef RGB_MATRIX_ENABLE
- # define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
- // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
- # define RGB_MATRIX_FRAMEBUFFER_EFFECTS
- // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
- // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
- # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
- # undef RGB_MATRIX_LED_PROCESS_LIMIT
- # undef RGB_MATRIX_LED_FLUSH_LIMIT
- # ifdef KEYBOARD_planck_rev6
- # define DRIVER_LED_TOTAL RGBLED_NUM
- # endif
- #endif
-
- #if defined(KEYBOARD_lets_split_rev2)
- # define USE_SERIAL
- # undef USE_I2C
- # define EE_HANDS
- #endif
-
- #if !defined(KEYBOARD_planck_light)
- # ifdef RGBLIGHT_ENABLE
- # define NO_MUSIC_MODE
- # endif // RGBLIGHT_ENABLE
- #else
- # undef QMK_ESC_OUTPUT
- # define QMK_ESC_OUTPUT E6 // usually COL
- # undef QMK_ESC_INPUT
- # define QMK_ESC_INPUT B0 // usually ROW
- # undef QMK_LED
- # define QMK_LED D6
- # undef QMK_SPEAKER
- # define QMK_SPEAKER B5
- # define SOLENOID_PIN A1
- #endif // KEYBOARD_planck_light
-
- #if defined(KEYBOARD_planck)
- # undef PRODUCT
- # if defined(KEYBOARD_planck_light)
- # define PRODUCT Drashna Hacked RGB Beacon(Planck Light)
- # elif defined(KEYBOARD_planck_rev6)
- # define PRODUCT Drashna Hacked Planck Rev6
- # elif defined(KEYBOARD_planck_ez)
- # define PRODUCT Drashna Hacked Planck EZ
- # endif
- #endif
- #undef NO_USB_STARTUP_CHECK
-
-
- #define EEPROM_I2C_RM24C512C
-
- #define ENCODER_DIRECTION_FLIP
- /*
- * MIDI options
- */
-
- /* Prevent use of disabled MIDI features in the keymap */
- //#define MIDI_ENABLE_STRICT 1
-
- /* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
- */
-
- // #define MIDI_BASIC
-
- /* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
- */
- //#define MIDI_ADVANCED
-
- /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
- //#define MIDI_TONE_KEYCODE_OCTAVES 2
-
- #define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
- #define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
- #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
-
- /* default 3V ERM vibration motor voltage and library*/
- #if FB_ERM_LRA == 0
- # define RATED_VOLTAGE 3
- # define V_RMS 2.3
- # define V_PEAK 3.30
- /* Library Selection */
- # define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
- /* default 2V LRA voltage and library */
- #elif FB_ERM_LRA == 1
- # define RATED_VOLTAGE 2
- # define V_RMS 2.0
- # define V_PEAK 2.85
- # define F_LRA 200
- /* Library Selection */
- # define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
- #endif
-
- /* Control 1 register settings */
- #define DRIVE_TIME 25
- #define AC_COUPLE 0
- #define STARTUP_BOOST 1
-
- /* Control 2 Settings */
- #define BIDIR_INPUT 1
- #define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
- #define SAMPLE_TIME 3
- #define BLANKING_TIME 1
- #define IDISS_TIME 1
-
- /* Control 3 settings */
- #define NG_THRESH 2
- #define ERM_OPEN_LOOP 1
- #define SUPPLY_COMP_DIS 0
- #define DATA_FORMAT_RTO 0
- #define LRA_DRIVE_MODE 0
- #define N_PWM_ANALOG 0
- #define LRA_OPEN_LOOP 0
- /* Control 4 settings */
- #define ZC_DET_TIME 0
- #define AUTO_CAL_TIME 3
|