|
|
- # BootloadHID Flashing Instructions and Bootloader Information
-
- ps2avr(GB) boards use an ATmega32A microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
-
- General flashing sequence:
-
- 1. Enter the bootloader using any of the following methods:
- * Tap the `RESET` keycode (may not work on all devices)
- * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme)
- 2. Wait for the OS to detect the device
- 3. Flash a .hex file
- 4. Reset the device into application mode (may be done automatically)
-
- ## bootloadHID Flashing Target
-
- ?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
-
- To flash via the command line, use the target `:bootloadHID` by executing the following command:
-
- make <keyboard>:<keymap>:bootloadHID
-
- ## GUI Flashing
-
- ### Windows
- 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
- 2. Place your keyboard into reset.
- 3. Ensure the configured VendorID is `16c0` and ProductID is `05df`
- 4. Press the `Find Device` button and ensure that your keyboard is found.
- 5. Press the `Open .hex File` button and locate the `.hex` file you created.
- 6. Press the `Flash Device` button and wait for the process to complete.
-
- ## Command Line Flashing
-
- 1. Place your keyboard into reset.
- 2. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
-
- ### Windows Manual Installation
- For MSYS2:
- 1. Download the BootloadHID firmware package from https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz.
- 2. Extract contents using a compatible tool, for example 7-Zip.
- 3. Add to the MSYS path by copying `commandline/bootloadHID.exe` from the extracted archive to your MSYS2 installation, typically `C:\msys64\usr\bin`.
-
- For native Windows flashing, the `bootloadHID.exe` can be used outside of the MSYS2 environment.
-
- ### Linux Manual Installation
- 1. Install libusb development dependency:
- ```bash
- # This depends on OS - for Debian the following works
- sudo apt-get install libusb-dev
- ```
- 2. Download the BootloadHID firmware package:
- ```
- wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
- ```
- 3. Build the bootloadHID executable:
- ```
- cd /tmp/bootloadHID.2012-12-08/commandline/
- make
- sudo cp bootloadHID /usr/local/bin
- ```
-
- ### MacOS Manual Installation
- 1. Install Homebrew by typing the following:
- ```
- /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
- ```
- 2. Install the following packages:
- ```
- brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
- ```
|