- /* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- /* Select hand configuration */
-
- // #define MASTER_LEFT
- // #define MASTER_RIGHT
- #define EE_HANDS
- #define SPLIT_MODS_ENABLE
-
- #undef USE_I2C
- #undef SSD1306OLED
-
- // #define TAPPING_FORCE_HOLD
- // #define TAPPING_TERM 100
-
- #ifdef RGBLIGHT_ENABLE
- # undef RGBLED_NUM
- # define RGBLED_NUM 27
-
- # define RGBLIGHT_HUE_STEP 8
- # define RGBLIGHT_SAT_STEP 8
- # define RGBLIGHT_VAL_STEP 5
- # define RGBLIGHT_LIMIT_VAL 120
- #endif
-
- #ifdef RGB_MATRIX_ENABLE
- # ifdef CONVERT_TO_PROTON_C
- # undef RGB_DI_PIN
- # define RGB_DI_PIN A3
- # endif
- # define RGB_MATRIX_KEYPRESSES // reacts to keypresses
- // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
- // # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
- # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
- // # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
- // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
- # ifndef RGB_MATRIX_MAXIMUM_BRIGHTNESS
- # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
- # endif
- # define RGB_MATRIX_HUE_STEP 8
- # define RGB_MATRIX_SAT_STEP 8
- # define RGB_MATRIX_VAL_STEP 5
- # define RGB_MATRIX_SPD_STEP 10
- #endif
-
- #ifdef CONVERT_TO_PROTON_C
- # define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
- # define WS2812_PWM_CHANNEL 4 // default: 2
- # define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
- # define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
- # define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
- # define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
-
- # undef SOFT_SERIAL_PIN
- # define SOFT_SERIAL_PIN D3
- # define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
- # define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-
- // #define INIT_EE_HANDS_LEFT
- // #define INIT_EE_HANDS_RIGHT
- #endif
-
- #if defined(AUDIO_ENABLE) && !defined(CONVERT_TO_PROTON_C)
- # define AUDIO_PIN B6
- # define NO_MUSIC_MODE
- #endif
-
- #ifdef HAPTIC_ENABLE
- # define SOLENOID_PIN B7
- #endif
-
- #undef PRODUCT
- #ifdef CONVERT_TO_PROTON_C
- # define PRODUCT Drashna Hacked ARM Corne Keyboard
- #else
- # define PRODUCT Drashna Hacked Corne Keyboard
- #endif
-
- #define TAPPING_TERM_PER_KEY
|