@ -0,0 +1,59 @@ | |||
/* | |||
Copyright 2021 stevendlander | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER stevendlander | |||
#define PRODUCT Unicomp Mini M | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 12 | |||
#define MATRIX_COLS 16 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1 } | |||
#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, B7, D5, D4, D3, D2 } | |||
#define UNUSED_PINS | |||
#define LED_PIN_ON_STATE 0 | |||
#define LED_NUM_LOCK_PIN B6 | |||
#define LED_CAPS_LOCK_PIN B5 | |||
#define LED_SCROLL_LOCK_PIN B4 | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ | |||
#define DEBOUNCE 5 | |||
/* The Mini M has no diodes */ | |||
#define MATRIX_HAS_GHOST |
@ -0,0 +1,462 @@ | |||
{ | |||
"keyboard_name": "Unicomp Mini M", | |||
"url": "", | |||
"maintainer": "stevendlander", | |||
"width": 15.5, | |||
"height": 7.5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ "label": "Esc", | |||
"x": 0, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F1", | |||
"x": 2, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F2", | |||
"x": 3, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F3", | |||
"x": 4, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F4", | |||
"x": 5, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F5", | |||
"x": 6.5, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F6", | |||
"x": 7.5, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F7", | |||
"x": 8.5, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F8", | |||
"x": 9.5, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F9", | |||
"x": 11, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F10", | |||
"x": 12, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F11", | |||
"x": 13, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "F12", | |||
"x": 14, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "PrtSc", | |||
"x": 15.25, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "Scroll Lock", | |||
"x": 16.25, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "Pause", | |||
"x": 17.25, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "~", | |||
"x": 0, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "!", | |||
"x": 1, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "@", | |||
"x": 2, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "#", | |||
"x": 3, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "$", | |||
"x": 4, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "%", | |||
"x": 5, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "^", | |||
"x": 6, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "&", | |||
"x": 7, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "*", | |||
"x": 8, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "(", | |||
"x": 9, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": ")", | |||
"x": 10, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "_", | |||
"x": 11, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "+", | |||
"x": 12, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "Backspace", | |||
"x": 13, | |||
"y": 1.5, | |||
"w": 2 | |||
}, | |||
{ | |||
"label": "Insert", | |||
"x": 15.25, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "Home", | |||
"x": 16.25, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "PgUp", | |||
"x": 17.25, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "Tab", | |||
"x": 0, | |||
"y": 2.5, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"label": "Q", | |||
"x": 1.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "W", | |||
"x": 2.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "E", | |||
"x": 3.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "R", | |||
"x": 4.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "T", | |||
"x": 5.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "Y", | |||
"x": 6.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "U", | |||
"x": 7.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "I", | |||
"x": 8.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "O", | |||
"x": 9.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "P", | |||
"x": 10.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "{", | |||
"x": 11.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "}", | |||
"x": 12.5, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "|", | |||
"x": 13.5, | |||
"y": 2.5, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"label": "Delete", | |||
"x": 15.25, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "End", | |||
"x": 16.25, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "PgDn", | |||
"x": 17.25, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "Caps Lock", | |||
"x": 0, | |||
"y": 3.5, | |||
"w": 1.75 | |||
}, | |||
{ | |||
"label": "A", | |||
"x": 1.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "S", | |||
"x": 2.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "D", | |||
"x": 3.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "F", | |||
"x": 4.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "G", | |||
"x": 5.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "H", | |||
"x": 6.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "J", | |||
"x": 7.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "K", | |||
"x": 8.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "L", | |||
"x": 9.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": ":", | |||
"x": 10.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "\"", | |||
"x": 11.75, | |||
"y": 3.5 | |||
}, | |||
{ | |||
"label": "Enter", | |||
"x": 12.75, | |||
"y": 3.5, | |||
"w": 2.25 | |||
}, | |||
{ | |||
"label": "Shift", | |||
"x": 0, | |||
"y": 4.5, | |||
"w": 2.25 | |||
}, | |||
{ | |||
"label": "Z", | |||
"x": 2.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "X", | |||
"x": 3.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "C", | |||
"x": 4.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "V", | |||
"x": 5.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "B", | |||
"x": 6.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "N", | |||
"x": 7.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "M", | |||
"x": 8.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "<", | |||
"x": 9.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": ">", | |||
"x": 10.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "?", | |||
"x": 11.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "Shift", | |||
"x": 12.25, | |||
"y": 4.5, | |||
"w": 2.75 | |||
}, | |||
{ | |||
"label": "\u2191", | |||
"x": 16.25, | |||
"y": 4.5 | |||
}, | |||
{ | |||
"label": "Ctrl", | |||
"x": 0, | |||
"y": 5.5, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"label": "Meta", | |||
"x": 1.5, | |||
"y": 5.5, | |||
"w": 1 | |||
}, | |||
{ | |||
"label": "Alt", | |||
"x": 2.5, | |||
"y": 5.5, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"label": "Space", | |||
"x": 4, | |||
"y": 5.5, | |||
"w": 5.75 | |||
}, | |||
{ | |||
"label": "Alt", | |||
"x": 9.75, | |||
"y": 5.5, | |||
"w": 1.25 | |||
}, | |||
{ | |||
"label": "Meta", | |||
"x": 11, | |||
"y": 5.5, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"label": "Menu", | |||
"x": 12.5, | |||
"y": 5.5, | |||
"w": 1 | |||
}, | |||
{ | |||
"label": "Ctrl", | |||
"x": 13.5, | |||
"y": 5.5, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"label": "\u2190", | |||
"x": 15.25, | |||
"y": 5.5 | |||
}, | |||
{ | |||
"label": "\u2193", | |||
"x": 16.25, | |||
"y": 5.5 | |||
}, | |||
{ | |||
"label": "\u2192", | |||
"x": 17.25, | |||
"y": 5.5 | |||
} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,106 @@ | |||
/* Copyright 2021 stevendlander | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Layer shortcuts | |||
enum custom_layers { | |||
_QWERTY, | |||
_NUMPAD, | |||
}; | |||
enum custom_keycodes { | |||
NUMSLCK = SAFE_RANGE, // Num Lock on shift, Scroll Lock regularly | |||
PAUSRST, // Resets keyboard on shift, Pause|break regularly | |||
PSCSYSR, // Sends SYSREQ on alt, Print Screen regularly | |||
}; | |||
// Mod key detection | |||
#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, PSCSYSR, NUMSLCK, PAUSRST, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, | |||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_NUMPAD] = LAYOUT( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NUMSLCK, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_PMNS, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_TRNS, KC_PDOT, KC_PSLS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case NUMSLCK: { | |||
if (record->event.pressed) { | |||
if (keyboard_report->mods & MODS_SHIFT_MASK) { | |||
tap_code(KC_NLCK); | |||
} else { | |||
register_code(KC_SLCK); | |||
} | |||
} else { | |||
unregister_code(KC_SLCK); | |||
} | |||
break; | |||
} | |||
case PAUSRST: { | |||
if (record->event.pressed) { | |||
if (keyboard_report->mods & MODS_SHIFT_MASK) { | |||
reset_keyboard(); | |||
} else { | |||
register_code(KC_PAUS); | |||
} | |||
} else { | |||
unregister_code(KC_PAUS); | |||
} | |||
break; | |||
} | |||
case PSCSYSR: { | |||
if (record->event.pressed) { | |||
if (keyboard_report->mods & MODS_ALT_MASK) { | |||
tap_code(KC_SYSREQ); | |||
} else { | |||
register_code(KC_PAUS); | |||
} | |||
} else { | |||
unregister_code(KC_PAUS); | |||
} | |||
break; | |||
} | |||
} | |||
return true; | |||
} | |||
bool led_update_user(led_t led_state) { | |||
static bool num_state = false; | |||
if (num_state != led_state.num_lock) { | |||
if (led_state.num_lock) { | |||
layer_on(_NUMPAD); | |||
} else { | |||
layer_off(_NUMPAD); | |||
} | |||
num_state = led_state.num_lock; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
# The default keymap for unicomp\_mini\_m |
@ -0,0 +1,127 @@ | |||
## Unicomp Mini M with Teensy2.0++ controller & QMK Firmware | |||
### Overview | |||
#### Goals | |||
The goal of this project was to replace the stock control board of the Unicomp Mini M with a programmable one. The Mini | |||
M was released by [Unicomp](https://www.pckeyboard.com) in Q1 of 2021 and is a re-release of The IBM Model M Space | |||
Saving Keyboard (SSK) with some enhancements. | |||
This guide strives to achieve the following: | |||
* Make completely reversable changes, or in other words, no permanent modifications to the Mini M | |||
* Allow full programmability of the Mini M via QMK | |||
* Be able to flash firmware without having to take the board apart to hit the reset button | |||
* Create a default keymap that works just like the stock keymap shipped from Unicomp, including the toggle-able number | |||
pad | |||
* Support all LEDs as normal | |||
My guide will go a few steps further: | |||
* Convert the wired connection from USB-A to USB-C | |||
* Install a potentiometer to dim the LEDs if desired | |||
#### Credits | |||
The following resources were instrumental to the success of this project: | |||
* Model M 101/102 write-up located in `qmk_firmware/keyboards/converter/modelm` | |||
* [Model M Subreddit](https://modelm.reddit.com) | |||
* Model M Discord | |||
### Hardware | |||
##### Parts | |||
For a working Mini M with QMK *without* LEDs working, the following parts are necessary: | |||
* 1 Adafruit Perma-Proto Full Sized Breadboard. Luckily, this board is a perfect fit for the Mini M case! | |||
* 1 Teensy2.0++, with headers soldered on if you can find it | |||
* 2 20-row x 1 column headers, if you can't find a Teensy with headers already soldered on | |||
* 2 16-pin Ribbon connectors, PCB mount | |||
* Hookup wire. I used 30AWG wire and while it worked, I should have used 1 gauge (or more) thicker | |||
* A panel mount male USB-B to female USB-C extender | |||
To get the Mini M working with LEDs, you will need: | |||
* 3 1kOhm through-hole resistors | |||
##### Tools | |||
The following were absolutely critical for the project: | |||
* Soldering iron, preferably one with a narrow tip for small connections | |||
* Drill, preferably a hand-held rotary tool (such as a Dremel) | |||
* Wire strippers/cutters | |||
* A sharp knife | |||
Optional, but worth having around: | |||
* Helping-hands, PCB holder, preferably both | |||
* Multi-meter for testing continuity of your connections | |||
* Hot-glue gun for mounting the USB extender to the Perma-Proto | |||
### Assembly | |||
#### Solder Teensy to the Perma-Proto | |||
1. Solder headers to Teensy | |||
2. Solder headers to Perma-Proto | |||
#### Solder ribbon connectors | |||
* Rows on the Perma-Proto that line up with membrane ribbons | |||
* Trim excess under board | |||
* Test continuity | |||
#### Solder in hookup wires | |||
* Ribbon connector used for the right ribbon will need hookup wire to establish connections to the Teensy | |||
* 12 required, 16 if you want full functionality | |||
#### Optional: Solder in resistors | |||
#### Caveat: D6 pin on the Teensy | |||
There are a few ways to mount the Teensy to the Perma-Proto board. I chose to connect my 16 pin ribbon connector to the | |||
Teensy pins starting at C7 and ending at D2. If you do this, beware that pin D6 will not work for the purposes of this | |||
project. It is possible to modify it to make it so, but that is beyond the scope of this guide. | |||
Bypassing D6 is necessary if you mount your ribbon connector as I have just described. Luckily, it is a simple process! | |||
First, with a sharp knife, sever the connection between your ribbon connector pin that is connected to Teensy D6 pin. I | |||
would recommend doing this at the closest possible point to the Teensy on the underside of the Perma-Proto board. Once | |||
that is done, use a remaining point on the Perma-Proto bus for that ribbon connection (that was previously connected to | |||
D6) to add a jumper wire connected to pin B7. If you are using the firmware files provided in this repository, | |||
everything is already set for this configuration. | |||
### Testing | |||
### Software | |||
#### Build firmware | |||
See qmk documentation on getting your build environment working. | |||
Compile the Mini M firmware files with the default keymap. It allows for the Mini M to be used with the same | |||
functionality as shipped from the manufacturer. | |||
```bash | |||
$ qmk compile -kb unicomp/mini_m -km default | |||
``` | |||
While plugged in, press the reset button on your Teensy and then: | |||
```bash | |||
$ qmk flash -kb unicomp/mini_m -km default | |||
``` | |||
If everything works to this point, congratulations! You now have a programmable Mini M. If you are using the default | |||
keymap, you can reset your Teensy by pressing Shift+Pause together, eliminating the need to take apart the case in order | |||
to do so. | |||
#### Keymaps | |||
To build your own keymap, create a new directory in `keyboards/unicomp/mini_m/keymaps/<your name>`, copy the files from | |||
`keyboards/unicomp/mini_m/default` into your new directory, and edit them as you wish. When you are ready to flash your | |||
new keymap to the Mini M, the command will be `qmk flash -kb unicomp/mini_m -kb <your name>`. |
@ -0,0 +1,22 @@ | |||
# MCU name | |||
MCU = at90usb1286 | |||
# Bootloader selection | |||
BOOTLOADER = halfkay | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = no # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output |
@ -0,0 +1,16 @@ | |||
/* Copyright 2021 stevendlander | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "unicomp_mini_m.h" |
@ -0,0 +1,49 @@ | |||
/* Copyright 2021 stevendlander | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This a shortcut to help you visually see your layout. | |||
* The first section contains "names" for physical keys of the keyboard | |||
* and defines their position on the board. | |||
* The second section defines position of the keys on the switch matrix | |||
* (where COLUMNS and ROWS crosses). */ | |||
#define LAYOUT( \ | |||
K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, \ | |||
\ | |||
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, \ | |||
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K \ | |||
) \ | |||
{ \ | |||
/* 00 */ { K4A, K5A, K4F, K1M, K5C, K5D, K5E, K3K, KC_NO, KC_NO, KC_NO, KC_NO, K0C, K2N, KC_NO, KC_NO }, \ | |||
/* 01 */ { K2A, K1B, K3B, KC_NO, KC_NO, KC_NO, KC_NO, K4G, K5F, KC_NO, KC_NO, KC_NO, KC_NO, K2M, K0H, K1N, }, \ | |||
/* 02 */ { K2C, K2D, K5B, K2E, K2F, K1C, K1E, KC_NO, K1D, K1F, K1G, K2B, K3A, KC_NO, KC_NO, KC_NO }, \ | |||
/* 03 */ { KC_NO, KC_NO, K4B, KC_NO, KC_NO, KC_NO, KC_NO, K3G, K5G, KC_NO, KC_NO, K0B, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||
/* 04 */ { KC_NO, KC_NO, K4E, KC_NO, KC_NO, KC_NO, KC_NO, K3J, K5H, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0A, K1A, }, \ | |||
/* 05 */ { KC_NO, KC_NO, K3C, KC_NO, KC_NO, KC_NO, KC_NO, K4H, K5I, K3L, K0F, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||
/* 06 */ { KC_NO, KC_NO, K4C, KC_NO, KC_NO, KC_NO, KC_NO, K3H, K5J, K4M, K5K, K5L, K4L, K5N, KC_NO, KC_NO }, \ | |||
/* 07 */ { KC_NO, KC_NO, K4D, KC_NO, KC_NO, KC_NO, KC_NO, K3I, KC_NO, KC_NO, KC_NO, K5M, K4N, K5O, KC_NO, KC_NO }, \ | |||
/* 08 */ { KC_NO, KC_NO, K3F, KC_NO, KC_NO, KC_NO, KC_NO, K4K, KC_NO, K4O, K1O, K3P, K4P, KC_NO, KC_NO, KC_NO }, \ | |||
/* 09 */ { KC_NO, KC_NO, K3E, K0E, K0I, KC_NO, KC_NO, K4J, KC_NO, K3N, KC_NO, KC_NO, KC_NO, K4Q, KC_NO, KC_NO }, \ | |||
/* 0A */ { K0D, KC_NO, K3D, KC_NO, K0G, KC_NO, KC_NO, K4I, KC_NO, K3M, K0K, K0J, K4R, K3Q, KC_NO, KC_NO }, \ | |||
/* 0B */ { K1I, K1J, KC_NO, K1K, K1L, K2G, K2I, KC_NO, K2H, K2J, K2K, K1H, K2L, K3O, KC_NO, K5P, }, \ | |||
} | |||
/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ |