Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Nick Brassel <nick@tzarc.org>pull/13308/head
@ -0,0 +1,70 @@ | |||||
/* Copyright 2021 Valdydesu_ | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xAB69 | |||||
#define PRODUCT_ID 0x8585 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER valdydesu_ | |||||
#define PRODUCT makrosu | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 1 | |||||
#define MATRIX_COLS 6 | |||||
/* key matrix pins */ | |||||
#define MATRIX_ROW_PINS { B6 } | |||||
#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5} | |||||
#define UNUSED_PINS | |||||
#define ENCODERS_PAD_A { D1 } | |||||
#define ENCODERS_PAD_B { E6 } | |||||
#define ENCODER_DIRECTION_FLIP | |||||
#define TAP_CODE_DELAY 10 | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
#define BOOTMAGIC_LITE_ROW 0 | |||||
#define BOOTMAGIC_LITE_COLUMN 5 | |||||
/* number of backlight levels */ | |||||
#ifdef BACKLIGHT_PIN | |||||
#define BACKLIGHT_LEVELS 0 | |||||
#endif | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
// EEPROM usage | |||||
#ifdef RGB_DI_PIN | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 0 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#endif |
@ -0,0 +1,21 @@ | |||||
{ | |||||
"keyboard_name": "MakrOSU", | |||||
"url": "", | |||||
"maintainer": "Valdydesu_", | |||||
"width": 3, | |||||
"height": 2, | |||||
"layouts": { | |||||
"LAYOUT": { | |||||
"layout": [ | |||||
{"label" : "Esc", "x":0, "y":0}, | |||||
{"label" : "F1", "x":1, "y":0}, | |||||
{"label" : "F2", "x":2, "y":0}, | |||||
{"label" : "Lower", "x":0, "y":1}, | |||||
{"label" : "Z", "x":1.5, "y":1}, | |||||
{"label" : "X", "x":2.5, "y":1} | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,133 @@ | |||||
/* Copyright 2021 Valdydesu_ | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
enum planck_layers { | |||||
_1, | |||||
_2, | |||||
_3, | |||||
_4 | |||||
}; | |||||
enum planck_keycodes { | |||||
L1 = SAFE_RANGE, | |||||
L2, | |||||
L3 | |||||
}; | |||||
#define LOWER MO(_4) | |||||
#define IND_1 D4 | |||||
#define IND_2 C6 | |||||
#define IND_3 D7 | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_1] = LAYOUT( | |||||
KC_ESC, KC_F1, KC_F2, | |||||
LOWER, KC_Z, KC_X), | |||||
[_2] = LAYOUT( | |||||
LALT(KC_TAB), LGUI(KC_TAB), LCTL(KC_S), | |||||
LOWER, LCTL(KC_C), LCTL(KC_V)), | |||||
[_3] = LAYOUT( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS), | |||||
[_4] = LAYOUT( | |||||
L1, L2, L3, | |||||
_______, _______, _______), | |||||
}; | |||||
layer_state_t layer_state_set_user(layer_state_t state) { | |||||
state = update_tri_layer_state(state, _4, X_PAUSE, X_PAUSE); | |||||
writePin(IND_1, layer_state_cmp(state, 1)); | |||||
writePin(IND_2, layer_state_cmp(state, 2)); | |||||
writePin(IND_3, layer_state_cmp(state, 3)); | |||||
return state; | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case L1: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_1); | |||||
} | |||||
return false; | |||||
break; | |||||
case L2: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_2); | |||||
} | |||||
return false; | |||||
break; | |||||
case L3: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_3); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} | |||||
void matrix_init_user(void) { | |||||
//init the Pro Micro on-board LEDs | |||||
setPinOutput(IND_1); | |||||
setPinOutput(IND_2); | |||||
setPinOutput(IND_3); | |||||
//set to off | |||||
writePinHigh(IND_1); | |||||
writePinHigh(IND_2); | |||||
writePinHigh(IND_3); | |||||
} | |||||
void encoder_update_user(uint8_t index, bool clockwise) { | |||||
if (layer_state_is(_1)) { | |||||
if (clockwise) { | |||||
tap_code(KC_UP); | |||||
} else { | |||||
tap_code(KC_DOWN); | |||||
} | |||||
} | |||||
else if (layer_state_is(_2)) { | |||||
if (clockwise) { | |||||
tap_code(KC_RGHT); | |||||
} else { | |||||
tap_code(KC_LEFT); | |||||
} | |||||
} | |||||
else if (layer_state_is(_3)) { | |||||
if (clockwise) { | |||||
tap_code(KC_VOLU); | |||||
} else { | |||||
tap_code(KC_VOLD); | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,133 @@ | |||||
/* Copyright 2021 Valdydesu_ | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
enum planck_layers { | |||||
_1, | |||||
_2, | |||||
_3, | |||||
_4 | |||||
}; | |||||
enum planck_keycodes { | |||||
L1 = SAFE_RANGE, | |||||
L2, | |||||
L3 | |||||
}; | |||||
#define LOWER MO(_4) | |||||
#define IND_1 D4 | |||||
#define IND_2 C6 | |||||
#define IND_3 D7 | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_1] = LAYOUT( | |||||
KC_ESC, KC_F1, KC_F2, | |||||
LOWER, KC_Z, KC_X), | |||||
[_2] = LAYOUT( | |||||
LALT(KC_TAB), LGUI(KC_TAB), LCTL(KC_S), | |||||
LOWER, LCTL(KC_C), LCTL(KC_V)), | |||||
[_3] = LAYOUT( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS), | |||||
[_4] = LAYOUT( | |||||
L1, L2, L3, | |||||
_______, _______, _______), | |||||
}; | |||||
layer_state_t layer_state_set_user(layer_state_t state) { | |||||
state = update_tri_layer_state(state, _4, X_PAUSE, X_PAUSE); | |||||
writePin(IND_1, layer_state_cmp(state, 1)); | |||||
writePin(IND_2, layer_state_cmp(state, 2)); | |||||
writePin(IND_3, layer_state_cmp(state, 3)); | |||||
return state; | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case L1: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_1); | |||||
} | |||||
return false; | |||||
break; | |||||
case L2: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_2); | |||||
} | |||||
return false; | |||||
break; | |||||
case L3: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_3); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} | |||||
void matrix_init_user(void) { | |||||
//init the Pro Micro on-board LEDs | |||||
setPinOutput(IND_1); | |||||
setPinOutput(IND_2); | |||||
setPinOutput(IND_3); | |||||
//set to off | |||||
writePinHigh(IND_1); | |||||
writePinHigh(IND_2); | |||||
writePinHigh(IND_3); | |||||
} | |||||
void encoder_update_user(uint8_t index, bool clockwise) { | |||||
if (layer_state_is(_1)) { | |||||
if (clockwise) { | |||||
tap_code(KC_UP); | |||||
} else { | |||||
tap_code(KC_DOWN); | |||||
} | |||||
} | |||||
else if (layer_state_is(_2)) { | |||||
if (clockwise) { | |||||
tap_code(KC_RGHT); | |||||
} else { | |||||
tap_code(KC_LEFT); | |||||
} | |||||
} | |||||
else if (layer_state_is(_3)) { | |||||
if (clockwise) { | |||||
tap_code(KC_VOLU); | |||||
} else { | |||||
tap_code(KC_VOLD); | |||||
} | |||||
} | |||||
} |
@ -0,0 +1 @@ | |||||
VIA_ENABLE = yes |
@ -0,0 +1,16 @@ | |||||
/* Copyright 2021 Valdydesu_ | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "makrosu.h" |
@ -0,0 +1,20 @@ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
/* This is a shortcut to help you visually see your layout. | |||||
* | |||||
* The first section contains all of the arguments representing the physical | |||||
* layout of the board and position of the keys. | |||||
* | |||||
* The second converts the arguments into a two-dimensional array which | |||||
* represents the switch matrix. | |||||
*/ | |||||
#define LAYOUT( \ | |||||
K02, K03, K04, \ | |||||
K00, K01, K05 \ | |||||
) \ | |||||
{ \ | |||||
{ K00, K01, K02, K03, K04, K05 }, \ | |||||
} | |||||
@ -0,0 +1,14 @@ | |||||
# [Makrosu Keypad](https://www.instagram.com/p/CJ8eoQ7BoGZ/) | |||||
A Macropad that has 1 rotary encoder, 2 switches and 3 push buttons. Default function is for playing OSU! | |||||
* Keyboard Maintainer: [Valdy](https://github.com/valdiieee) | |||||
* Hardware Supported: Pro Micro, EC11 rotary encoder, MX Style Switches, Push Buttons, 1n4148 diodes | |||||
* Hardware Availability: Private GB | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make makrosu:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||||
@ -0,0 +1,23 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Bootloader selection | |||||
BOOTLOADER = caterina | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||||
MOUSEKEY_ENABLE = no # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = no # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||||
AUDIO_ENABLE = no # Audio output | |||||
ENCODER_ENABLE = yes |