@ -0,0 +1,20 @@ | |||
# AEKISO60 | |||
A 60% PCB enabling use of ISO AEK keycaps and ALPS switches | |||
More info: https://geekhack.org/index.php?topic=103627.0 | |||
* Keyboard Maintainer: [4pplet](https://github.com/4pplet) | |||
* Hardware Supported: AEKISO60 Rev A | |||
Make example for this keyboard (after setting up your build environment): | |||
make 4pplet/aekiso60/rev_a:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
How to enter bootloader (DFU): | |||
* Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware. | |||
Alternative option if the firmware is already pre-flashed: | |||
* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware. |
@ -0,0 +1,57 @@ | |||
/* | |||
Copyright 2022 Stefan Sundin "4pplet" <mail@4pplet.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
// ROWS: Top to bottom, COLS: Left to right | |||
#define MATRIX_ROW_PINS {B15,A9,B7,A1,A2} | |||
#define MATRIX_COL_PINS {A3,A4,F1,F0,C15,C14,C13,B9,B8,B6,B5,B4,B3,A15} | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
#define QMK_ESC_OUTPUT A3 // usually COL | |||
#define QMK_ESC_INPUT B14 // usually ROW | |||
#define RGBLED_NUM 12 | |||
#define WS2812_EXTERNAL_PULLUP | |||
#define RGB_DI_PIN A8 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_EFFECT_BREATHING | |||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
#define RGBLIGHT_EFFECT_SNAKE | |||
#define RGBLIGHT_EFFECT_KNIGHT | |||
#define RGBLIGHT_EFFECT_CHRISTMAS | |||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
#define RGBLIGHT_EFFECT_RGB_TEST | |||
#define RGBLIGHT_EFFECT_ALTERNATING | |||
#define RGBLIGHT_EFFECT_TWINKLE | |||
#define LED_CAPS_LOCK_PIN A10 | |||
#define BACKLIGHT_LEVELS 5 |
@ -0,0 +1,85 @@ | |||
{ | |||
"keyboard_name": "AEKISO60 Rev B", | |||
"manufacturer": "4pplet", | |||
"url": "", | |||
"maintainer": "4pplet", | |||
"usb": { | |||
"vid": "0x4444", | |||
"pid": "0x0011", | |||
"device_version": "0.0.2" | |||
}, | |||
"layouts": { | |||
"LAYOUT_all": { | |||
"layout": [ | |||
{"x":0, "y":0, "w":1.25}, | |||
{"x":1.25, "y":0}, | |||
{"x":2.25, "y":0}, | |||
{"x":3.25, "y":0}, | |||
{"x":4.25, "y":0}, | |||
{"x":5.25, "y":0}, | |||
{"x":6.25, "y":0}, | |||
{"x":7.25, "y":0}, | |||
{"x":8.25, "y":0}, | |||
{"x":9.25, "y":0}, | |||
{"x":10.25, "y":0}, | |||
{"x":11.25, "y":0}, | |||
{"x":12.25, "y":0}, | |||
{"x":13.25, "y":0, "w":1.75}, | |||
{"x":0, "y":1, "w":1.75}, | |||
{"x":1.75, "y":1}, | |||
{"x":2.75, "y":1}, | |||
{"x":3.75, "y":1}, | |||
{"x":4.75, "y":1}, | |||
{"x":5.75, "y":1}, | |||
{"x":6.75, "y":1}, | |||
{"x":7.75, "y":1}, | |||
{"x":8.75, "y":1}, | |||
{"x":9.75, "y":1}, | |||
{"x":10.75, "y":1}, | |||
{"x":11.75, "y":1}, | |||
{"x":12.75, "y":1}, | |||
{"x":0, "y":2, "w":2}, | |||
{"x":2, "y":2}, | |||
{"x":3, "y":2}, | |||
{"x":4, "y":2}, | |||
{"x":5, "y":2}, | |||
{"x":6, "y":2}, | |||
{"x":7, "y":2}, | |||
{"x":8, "y":2}, | |||
{"x":9, "y":2}, | |||
{"x":10, "y":2}, | |||
{"x":11, "y":2}, | |||
{"x":12, "y":2}, | |||
{"x":13, "y":2}, | |||
{"x":14, "y":1, "h":2}, | |||
{"x":0, "y":3, "w":1.5}, | |||
{"x":1.5, "y":3}, | |||
{"x":2.5, "y":3}, | |||
{"x":3.5, "y":3}, | |||
{"x":4.5, "y":3}, | |||
{"x":5.5, "y":3}, | |||
{"x":6.5, "y":3}, | |||
{"x":7.5, "y":3}, | |||
{"x":8.5, "y":3}, | |||
{"x":9.5, "y":3}, | |||
{"x":10.5, "y":3}, | |||
{"x":11.5, "y":3}, | |||
{"x":12.5, "y":3, "w":1.5}, | |||
{"x":14, "y":3}, | |||
{"x":0, "y":4, "w":1.5}, | |||
{"x":1.5, "y":4, "w":1.25}, | |||
{"x":2.75, "y":4, "w":1.5}, | |||
{"x":4.25, "y":4, "w":2.75}, | |||
{"x":7, "y":4}, | |||
{"x":8, "y":4, "w":2.75}, | |||
{"x":10.75, "y":4, "w":1.5}, | |||
{"x":12.25, "y":4, "w":1.25}, | |||
{"x":13.5, "y":4, "w":1.5} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,21 @@ | |||
# AEKISO60 | |||
A 60% PCB enabling use of ISO AEK keycaps and ALPS switches | |||
More info: https://geekhack.org/index.php?topic=103627.0 | |||
* Keyboard Maintainer: [4pplet](https://github.com/4pplet) | |||
* Hardware Supported: AEKISO60 | |||
Make example for this keyboard (after setting up your build environment): | |||
make 4pplet/aekiso60/rev_a:default | |||
make 4pplet/aekiso60/rev_b:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
How to enter bootloader (DFU): | |||
* Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware. | |||
Alternative option if the firmware is already pre-flashed: | |||
* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware. |
@ -0,0 +1,19 @@ | |||
/* | |||
Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rev_b.h" | |||
@ -0,0 +1,48 @@ | |||
/* | |||
Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* LAYOUT_all | |||
* ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬──────┐ | |||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ | |||
* ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬────┤ | |||
* │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │ │ | |||
* ├──────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐1d │ | |||
* │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │ │ | |||
* ├─────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ | |||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │ | |||
* ├─────┼───┴┬──┴──┬┴───┴───┴─┬─┴─┬─┴───┴───┴┬──┴──┬┴───┬─┴───┤ | |||
* │40 │41 │43 │44 │45 │46 │48 │4a │4b │ | |||
* └─────┴────┴─────┴──────────┴───┴──────────┴─────┴────┴─────┘ | |||
*/ | |||
#define LAYOUT_all( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1d, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ | |||
k40, k41, k43, k44, k45, k46, k48, k4a, k4b \ | |||
) \ | |||
{ \ | |||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO},\ | |||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ | |||
{k40, k41, KC_NO, k43, k44, k45, k46, KC_NO, k48, KC_NO, k4a, k4b, KC_NO, KC_NO} \ | |||
} |
@ -0,0 +1,24 @@ | |||
# MCU name | |||
MCU = STM32F072 | |||
# Bootloader selection | |||
BOOTLOADER = stm32-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
# Wildcard to allow APM32 MCU | |||
DFU_SUFFIX_ARGS = -p FFFF -v FFFF | |||
# Enter lower-power sleep mode when on the ChibiOS idle thread | |||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |