* preliminary checkin for facew keyboard * Update readme file * put the standard 60 ansi layout in * update rules to have LAYOUT_60_ansi to use my userspace layoutspull/2938/merge
@ -0,0 +1,49 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef FACEW_CONFIG_H | |||
#define FACEW_CONFIG_H | |||
#include "config_common.h" | |||
#define VENDOR_ID 0x20A0 | |||
#define PRODUCT_ID 0x422D | |||
#define MANUFACTURER NotActuallyWinkeyless | |||
#define PRODUCT facew | |||
#define RGBLED_NUM 16 | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 11 | |||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } | |||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6} | |||
#define UNUSED_PINS | |||
#define DIODE_DIRECTION COL2ROW | |||
#define DEBOUNCING_DELAY 5 | |||
#define NO_BACKLIGHT_CLOCK | |||
#define BACKLIGHT_LEVELS 1 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define NO_UART 1 | |||
/* key combination for command */ | |||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||
#endif |
@ -0,0 +1,66 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "facew.h" | |||
#ifdef BACKLIGHT_ENABLE | |||
#include "backlight.h" | |||
#endif | |||
#ifdef RGBLIGHT_ENABLE | |||
#include "rgblight.h" | |||
#endif | |||
#include <avr/pgmspace.h> | |||
#include "action_layer.h" | |||
#include "i2c.h" | |||
#include "quantum.h" | |||
#ifdef RGBLIGHT_ENABLE | |||
extern rgblight_config_t rgblight_config; | |||
void rgblight_set(void) { | |||
if (!rgblight_config.enable) { | |||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||
led[i].r = 0; | |||
led[i].g = 0; | |||
led[i].b = 0; | |||
} | |||
} | |||
i2c_init(); | |||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); | |||
} | |||
#endif | |||
__attribute__ ((weak)) | |||
void matrix_scan_user(void) { | |||
} | |||
void backlight_init_ports(void) { | |||
DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); | |||
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); | |||
} | |||
void backlight_set(uint8_t level) { | |||
if (level == 0) { | |||
// Turn out the lights | |||
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); | |||
} else { | |||
// Turn on the lights | |||
PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); | |||
} | |||
} |
@ -0,0 +1,57 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef FACEW_H | |||
#define FACEW_H | |||
#include "quantum.h" | |||
#define LAYOUT_all( \ | |||
K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K10, K60,\ | |||
K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \ | |||
K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \ | |||
K19, K13, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, K50,\ | |||
K09, K00, K39, K30, K59, K69, K57, K29\ | |||
){ \ | |||
{ KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \ | |||
{ KC_NO, K11, K12, K13, K14, K15, K16, KC_NO, K18, K19, K10}, \ | |||
{ KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \ | |||
{ KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, K50}, \ | |||
{ KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ | |||
{ KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ | |||
} | |||
#define LAYOUT_60_ansi( \ | |||
K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K60,\ | |||
K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \ | |||
K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \ | |||
K19, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, \ | |||
K09, K00, K39, K30, K59, K69, K57, K29\ | |||
){ \ | |||
{ KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \ | |||
{ KC_NO, K11, K12, KC_NO, K14, K15, K16, KC_NO, K18, K19, KC_NO}, \ | |||
{ KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \ | |||
{ KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, KC_NO}, \ | |||
{ KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ | |||
{ KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ | |||
} | |||
#endif |
@ -0,0 +1,106 @@ | |||
/* | |||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
// Please do not modify this file | |||
#include <avr/io.h> | |||
#include <util/twi.h> | |||
#include "i2c.h" | |||
void i2c_set_bitrate(uint16_t bitrate_khz) { | |||
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); | |||
if (bitrate_div >= 16) { | |||
bitrate_div = (bitrate_div - 16) / 2; | |||
} | |||
TWBR = bitrate_div; | |||
} | |||
void i2c_init(void) { | |||
// set pull-up resistors on I2C bus pins | |||
PORTC |= 0b11; | |||
i2c_set_bitrate(400); | |||
// enable TWI (two-wire interface) | |||
TWCR |= (1 << TWEN); | |||
// enable TWI interrupt and slave address ACK | |||
TWCR |= (1 << TWIE); | |||
TWCR |= (1 << TWEA); | |||
} | |||
uint8_t i2c_start(uint8_t address) { | |||
// reset TWI control register | |||
TWCR = 0; | |||
// begin transmission and wait for it to end | |||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); | |||
while (!(TWCR & (1<<TWINT))); | |||
// check if the start condition was successfully transmitted | |||
if ((TWSR & 0xF8) != TW_START) { | |||
return 1; | |||
} | |||
// transmit address and wait | |||
TWDR = address; | |||
TWCR = (1<<TWINT) | (1<<TWEN); | |||
while (!(TWCR & (1<<TWINT))); | |||
// check if the device has acknowledged the READ / WRITE mode | |||
uint8_t twst = TW_STATUS & 0xF8; | |||
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { | |||
return 1; | |||
} | |||
return 0; | |||
} | |||
void i2c_stop(void) { | |||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); | |||
} | |||
uint8_t i2c_write(uint8_t data) { | |||
TWDR = data; | |||
// transmit data and wait | |||
TWCR = (1<<TWINT) | (1<<TWEN); | |||
while (!(TWCR & (1<<TWINT))); | |||
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { | |||
return 1; | |||
} | |||
return 0; | |||
} | |||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { | |||
if (i2c_start(address)) { | |||
return 1; | |||
} | |||
for (uint16_t i = 0; i < length; i++) { | |||
if (i2c_write(data[i])) { | |||
return 1; | |||
} | |||
} | |||
i2c_stop(); | |||
return 0; | |||
} |
@ -0,0 +1,27 @@ | |||
/* | |||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
// Please do not modify this file | |||
#ifndef __I2C_H__ | |||
#define __I2C_H__ | |||
void i2c_init(void); | |||
void i2c_set_bitrate(uint16_t bitrate_khz); | |||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); | |||
#endif |
@ -0,0 +1,16 @@ | |||
{ | |||
"keyboard_name": "FaceW", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 15, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT_all": { | |||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] | |||
}, | |||
"LAYOUT_60_ansi": { | |||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] | |||
} | |||
} | |||
} |
@ -0,0 +1,43 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_all( | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL | |||
), | |||
[1] = LAYOUT_all( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL, | |||
MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, MO(2), | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
[2] = LAYOUT_all( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
}; | |||
@ -0,0 +1,51 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_all( | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TG(2), | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RALT, KC_RGUI, KC_RCTL | |||
), | |||
[1] = LAYOUT_all( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
[2] = LAYOUT_all( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT | |||
), | |||
[3] = LAYOUT_all( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
}; | |||
@ -0,0 +1,18 @@ | |||
MechMerlin's FaceW Sprit Edition Layout | |||
====================== | |||
This is the preferred 60% layout used by u/merlin36, host of the [MechMerlin YouTube channel](www.youtube.com/mechmerlin). | |||
## Keyboard Notes | |||
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) | |||
- Uses ps2avru instead of ps2avrgb | |||
- To put in reset mode hold `q` while inserting the USB cable | |||
- Use flashing instructions from ps2avrgb QMK port | |||
## Keymap Notes | |||
- Does not support any form of inswitch lighting as Merlin hates them. | |||
- Arrow toggle switch to the right of right shift | |||
- Reset is FN + Left Shift + R | |||
### Build | |||
To build this keymap, simply run `make facew:mechmerlin` from the qmk_firmware directory. |
@ -0,0 +1,106 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include <util/delay.h> | |||
#include "matrix.h" | |||
#ifndef DEBOUNCE | |||
#define DEBOUNCE 5 | |||
#endif | |||
static uint8_t debouncing = DEBOUNCE; | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
void matrix_init(void) { | |||
// all outputs for rows high | |||
DDRB = 0xFF; | |||
PORTB = 0xFF; | |||
// all inputs for columns | |||
DDRA = 0x00; | |||
DDRC &= ~(0x111111<<2); | |||
DDRD &= ~(1<<PIND7); | |||
// all columns are pulled-up | |||
PORTA = 0xFF; | |||
PORTC |= (0b111111<<2); | |||
PORTD |= (1<<PIND7); | |||
// initialize matrix state: all keys off | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
matrix[row] = 0x00; | |||
matrix_debouncing[row] = 0x00; | |||
} | |||
} | |||
void matrix_set_row_status(uint8_t row) { | |||
DDRB = (1 << row); | |||
PORTB = ~(1 << row); | |||
} | |||
uint8_t bit_reverse(uint8_t x) { | |||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); | |||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); | |||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); | |||
return x; | |||
} | |||
uint8_t matrix_scan(void) { | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
matrix_set_row_status(row); | |||
_delay_us(5); | |||
matrix_row_t cols = ( | |||
// cols 0..7, PORTA 0 -> 7 | |||
(~PINA) & 0xFF | |||
) | ( | |||
// cols 8..13, PORTC 7 -> 0 | |||
bit_reverse((~PINC) & 0xFF) << 8 | |||
) | ( | |||
// col 14, PORTD 7 | |||
((~PIND) & (1 << PIND7)) << 7 | |||
); | |||
if (matrix_debouncing[row] != cols) { | |||
matrix_debouncing[row] = cols; | |||
debouncing = DEBOUNCE; | |||
} | |||
} | |||
if (debouncing) { | |||
if (--debouncing) { | |||
_delay_ms(1); | |||
} else { | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = matrix_debouncing[i]; | |||
} | |||
} | |||
} | |||
matrix_scan_user(); | |||
return 1; | |||
} | |||
inline matrix_row_t matrix_get_row(uint8_t row) { | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) { | |||
} |
@ -0,0 +1,24 @@ | |||
# FaceW | |||
A 60% no frills keyboard. | |||
The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs | |||
but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It | |||
is designed and manufactured in Korea. It originally uses BootMapperClient for programming but | |||
can now also use QMK. | |||
Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) | |||
Hardware Supported: FaceW Sprit Edition PCB | |||
Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352 | |||
## Keyboard Notes | |||
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) | |||
- Uses ps2avru instead of ps2avrgb | |||
- To put in reset mode hold `q` while inserting the USB cable | |||
- When flashing, type `bootloadHID -r yourfile.hex` and wait awhile | |||
Make example for this keyboard (after setting up your build environment): | |||
make facew:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,52 @@ | |||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
# | |||
# This program is free software: you can redistribute it and/or modify | |||
# it under the terms of the GNU General Public License as published by | |||
# the Free Software Foundation, either version 2 of the License, or | |||
# (at your option) any later version. | |||
# | |||
# This program is distributed in the hope that it will be useful, | |||
# but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
# GNU General Public License for more details. | |||
# | |||
# You should have received a copy of the GNU General Public License | |||
# along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
# MCU name | |||
MCU = atmega32a | |||
PROTOCOL = VUSB | |||
# unsupported features for now | |||
NO_UART = yes | |||
NO_SUSPEND_POWER_DOWN = yes | |||
# processor frequency | |||
F_CPU = 12000000 | |||
# Bootloader | |||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||
# different sizes, comment this out, and the correct address will be loaded | |||
# automatically (+60). See bootloader.mk for all options. | |||
BOOTLOADER = bootloadHID | |||
# build options | |||
BOOTMAGIC_ENABLE = yes | |||
MOUSEKEY_ENABLE = yes | |||
EXTRAKEY_ENABLE = yes | |||
CONSOLE_ENABLE = yes | |||
COMMAND_ENABLE = yes | |||
BACKLIGHT_ENABLE = no | |||
RGBLIGHT_ENABLE = no | |||
RGBLIGHT_CUSTOM_DRIVER = yes | |||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||
# custom matrix setup | |||
CUSTOM_MATRIX = yes | |||
SRC = matrix.c i2c.c | |||
# programming options | |||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex | |||
LAYOUTS = 60_ansi |
@ -0,0 +1,396 @@ | |||
/* Name: usbconfig.h | |||
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers | |||
* Author: Christian Starkjohann | |||
* Creation Date: 2005-04-01 | |||
* Tabsize: 4 | |||
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH | |||
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) | |||
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ | |||
*/ | |||
#ifndef __usbconfig_h_included__ | |||
#define __usbconfig_h_included__ | |||
#include "config.h" | |||
/* | |||
General Description: | |||
This file is an example configuration (with inline documentation) for the USB | |||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is | |||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may | |||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any | |||
other hardware interrupt, as long as it is the highest level interrupt, see | |||
section at the end of this file). | |||
*/ | |||
/* ---------------------------- Hardware Config ---------------------------- */ | |||
#define USB_CFG_IOPORTNAME D | |||
/* This is the port where the USB bus is connected. When you configure it to | |||
* "B", the registers PORTB, PINB and DDRB will be used. | |||
*/ | |||
#define USB_CFG_DMINUS_BIT 3 | |||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. | |||
* This may be any bit in the port. | |||
*/ | |||
#define USB_CFG_DPLUS_BIT 2 | |||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. | |||
* This may be any bit in the port. Please note that D+ must also be connected | |||
* to interrupt pin INT0! [You can also use other interrupts, see section | |||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as | |||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the | |||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame | |||
* markers every millisecond.] | |||
*/ | |||
#define USB_CFG_CLOCK_KHZ (F_CPU/1000) | |||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, | |||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code | |||
* require no crystal, they tolerate +/- 1% deviation from the nominal | |||
* frequency. All other rates require a precision of 2000 ppm and thus a | |||
* crystal! | |||
* Since F_CPU should be defined to your actual clock rate anyway, you should | |||
* not need to modify this setting. | |||
*/ | |||
#define USB_CFG_CHECK_CRC 0 | |||
/* Define this to 1 if you want that the driver checks integrity of incoming | |||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are | |||
* currently only available for 18 MHz crystal clock. You must choose | |||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option. | |||
*/ | |||
/* ----------------------- Optional Hardware Config ------------------------ */ | |||
/* #define USB_CFG_PULLUP_IOPORTNAME D */ | |||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of | |||
* V+, you can connect and disconnect the device from firmware by calling | |||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). | |||
* This constant defines the port on which the pullup resistor is connected. | |||
*/ | |||
/* #define USB_CFG_PULLUP_BIT 4 */ | |||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined | |||
* above) where the 1.5k pullup resistor is connected. See description | |||
* above for details. | |||
*/ | |||
/* --------------------------- Functional Range ---------------------------- */ | |||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 | |||
/* Define this to 1 if you want to compile a version with two endpoints: The | |||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint | |||
* number). | |||
*/ | |||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 | |||
/* Define this to 1 if you want to compile a version with three endpoints: The | |||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number | |||
* configured below) and a catch-all default interrupt-in endpoint as above. | |||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. | |||
*/ | |||
#define USB_CFG_EP3_NUMBER 3 | |||
/* If the so-called endpoint 3 is used, it can now be configured to any other | |||
* endpoint number (except 0) with this macro. Default if undefined is 3. | |||
*/ | |||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ | |||
/* The above macro defines the startup condition for data toggling on the | |||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. | |||
* Since the token is toggled BEFORE sending any data, the first packet is | |||
* sent with the oposite value of this configuration! | |||
*/ | |||
#define USB_CFG_IMPLEMENT_HALT 0 | |||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature | |||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature, | |||
* it is required by the standard. We have made it a config option because it | |||
* bloats the code considerably. | |||
*/ | |||
#define USB_CFG_SUPPRESS_INTR_CODE 0 | |||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't | |||
* want to send any data over them. If this macro is defined to 1, functions | |||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if | |||
* you need the interrupt-in endpoints in order to comply to an interface | |||
* (e.g. HID), but never want to send any data. This option saves a couple | |||
* of bytes in flash memory and the transmit buffers in RAM. | |||
*/ | |||
#define USB_CFG_INTR_POLL_INTERVAL 1 | |||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll | |||
* interval. The value is in milliseconds and must not be less than 10 ms for | |||
* low speed devices. | |||
*/ | |||
#define USB_CFG_IS_SELF_POWERED 0 | |||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the | |||
* device is powered from the USB bus. | |||
*/ | |||
#define USB_CFG_MAX_BUS_POWER 500 | |||
/* Set this variable to the maximum USB bus power consumption of your device. | |||
* The value is in milliamperes. [It will be divided by two since USB | |||
* communicates power requirements in units of 2 mA.] | |||
*/ | |||
#define USB_CFG_IMPLEMENT_FN_WRITE 1 | |||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out | |||
* transfers. Set it to 0 if you don't need it and want to save a couple of | |||
* bytes. | |||
*/ | |||
#define USB_CFG_IMPLEMENT_FN_READ 0 | |||
/* Set this to 1 if you need to send control replies which are generated | |||
* "on the fly" when usbFunctionRead() is called. If you only want to send | |||
* data from a static buffer, set it to 0 and return the data from | |||
* usbFunctionSetup(). This saves a couple of bytes. | |||
*/ | |||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 | |||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. | |||
* You must implement the function usbFunctionWriteOut() which receives all | |||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number | |||
* can be found in 'usbRxToken'. | |||
*/ | |||
#define USB_CFG_HAVE_FLOWCONTROL 0 | |||
/* Define this to 1 if you want flowcontrol over USB data. See the definition | |||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in | |||
* usbdrv.h. | |||
*/ | |||
#define USB_CFG_DRIVER_FLASH_PAGE 0 | |||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page | |||
* where the driver's constants (descriptors) are located. Or in other words: | |||
* Define this to 1 for boot loaders on the ATMega128. | |||
*/ | |||
#define USB_CFG_LONG_TRANSFERS 0 | |||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes | |||
* in a single control-in or control-out transfer. Note that the capability | |||
* for long transfers increases the driver size. | |||
*/ | |||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ | |||
/* This macro is a hook if you want to do unconventional things. If it is | |||
* defined, it's inserted at the beginning of received message processing. | |||
* If you eat the received message and don't want default processing to | |||
* proceed, do a return after doing your things. One possible application | |||
* (besides debugging) is to flash a status LED on each packet. | |||
*/ | |||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ | |||
/* This macro is a hook if you need to know when an USB RESET occurs. It has | |||
* one parameter which distinguishes between the start of RESET state and its | |||
* end. | |||
*/ | |||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ | |||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was | |||
* received. | |||
*/ | |||
#define USB_COUNT_SOF 1 | |||
/* define this macro to 1 if you need the global variable "usbSofCount" which | |||
* counts SOF packets. This feature requires that the hardware interrupt is | |||
* connected to D- instead of D+. | |||
*/ | |||
/* #ifdef __ASSEMBLER__ | |||
* macro myAssemblerMacro | |||
* in YL, TCNT0 | |||
* sts timer0Snapshot, YL | |||
* endm | |||
* #endif | |||
* #define USB_SOF_HOOK myAssemblerMacro | |||
* This macro (if defined) is executed in the assembler module when a | |||
* Start Of Frame condition is detected. It is recommended to define it to | |||
* the name of an assembler macro which is defined here as well so that more | |||
* than one assembler instruction can be used. The macro may use the register | |||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages | |||
* immediately after an SOF pulse may be lost and must be retried by the host. | |||
* What can you do with this hook? Since the SOF signal occurs exactly every | |||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in | |||
* designs running on the internal RC oscillator. | |||
* Please note that Start Of Frame detection works only if D- is wired to the | |||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! | |||
*/ | |||
#define USB_CFG_CHECK_DATA_TOGGLING 0 | |||
/* define this macro to 1 if you want to filter out duplicate data packets | |||
* sent by the host. Duplicates occur only as a consequence of communication | |||
* errors, when the host does not receive an ACK. Please note that you need to | |||
* implement the filtering yourself in usbFunctionWriteOut() and | |||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable | |||
* for each control- and out-endpoint to check for duplicate packets. | |||
*/ | |||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 | |||
/* define this macro to 1 if you want the function usbMeasureFrameLength() | |||
* compiled in. This function can be used to calibrate the AVR's RC oscillator. | |||
*/ | |||
#define USB_USE_FAST_CRC 0 | |||
/* The assembler module has two implementations for the CRC algorithm. One is | |||
* faster, the other is smaller. This CRC routine is only used for transmitted | |||
* messages where timing is not critical. The faster routine needs 31 cycles | |||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine | |||
* may be worth the 32 bytes bigger code size if you transmit lots of data and | |||
* run the AVR close to its limit. | |||
*/ | |||
/* -------------------------- Device Description --------------------------- */ | |||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) | |||
/* USB vendor ID for the device, low byte first. If you have registered your | |||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free | |||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! | |||
* *** IMPORTANT NOTE *** | |||
* This template uses obdev's shared VID/PID pair for Vendor Class devices | |||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand | |||
* the implications! | |||
*/ | |||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) | |||
/* This is the ID of the product, low byte first. It is interpreted in the | |||
* scope of the vendor ID. If you have registered your own VID with usb.org | |||
* or if you have licensed a PID from somebody else, define it here. Otherwise | |||
* you may use one of obdev's free shared VID/PID pairs. See the file | |||
* USB-IDs-for-free.txt for details! | |||
* *** IMPORTANT NOTE *** | |||
* This template uses obdev's shared VID/PID pair for Vendor Class devices | |||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand | |||
* the implications! | |||
*/ | |||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02 | |||
/* Version number of the device: Minor number first, then major number. | |||
*/ | |||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' | |||
#define USB_CFG_VENDOR_NAME_LEN 13 | |||
/* These two values define the vendor name returned by the USB device. The name | |||
* must be given as a list of characters under single quotes. The characters | |||
* are interpreted as Unicode (UTF-16) entities. | |||
* If you don't want a vendor name string, undefine these macros. | |||
* ALWAYS define a vendor name containing your Internet domain name if you use | |||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for | |||
* details. | |||
*/ | |||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' | |||
#define USB_CFG_DEVICE_NAME_LEN 8 | |||
/* Same as above for the device name. If you don't want a device name, undefine | |||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if | |||
* you use a shared VID/PID. | |||
*/ | |||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ | |||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ | |||
/* Same as above for the serial number. If you don't want a serial number, | |||
* undefine the macros. | |||
* It may be useful to provide the serial number through other means than at | |||
* compile time. See the section about descriptor properties below for how | |||
* to fine tune control over USB descriptors such as the string descriptor | |||
* for the serial number. | |||
*/ | |||
#define USB_CFG_DEVICE_CLASS 0 | |||
#define USB_CFG_DEVICE_SUBCLASS 0 | |||
/* See USB specification if you want to conform to an existing device class. | |||
* Class 0xff is "vendor specific". | |||
*/ | |||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */ | |||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ | |||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ | |||
/* See USB specification if you want to conform to an existing device class or | |||
* protocol. The following classes must be set at interface level: | |||
* HID class is 3, no subclass and protocol required (but may be useful!) | |||
* CDC class is 2, use subclass 2 and protocol 1 for ACM | |||
*/ | |||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 | |||
/* Define this to the length of the HID report descriptor, if you implement | |||
* an HID device. Otherwise don't define it or define it to 0. | |||
* If you use this define, you must add a PROGMEM character array named | |||
* "usbHidReportDescriptor" to your code which contains the report descriptor. | |||
* Don't forget to keep the array and this define in sync! | |||
*/ | |||
/* #define USB_PUBLIC static */ | |||
/* Use the define above if you #include usbdrv.c instead of linking against it. | |||
* This technique saves a couple of bytes in flash memory. | |||
*/ | |||
/* ------------------- Fine Control over USB Descriptors ------------------- */ | |||
/* If you don't want to use the driver's default USB descriptors, you can | |||
* provide our own. These can be provided as (1) fixed length static data in | |||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at | |||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more | |||
* information about this function. | |||
* Descriptor handling is configured through the descriptor's properties. If | |||
* no properties are defined or if they are 0, the default descriptor is used. | |||
* Possible properties are: | |||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched | |||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is | |||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if | |||
* you want RAM pointers. | |||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found | |||
* in static memory is in RAM, not in flash memory. | |||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), | |||
* the driver must know the descriptor's length. The descriptor itself is | |||
* found at the address of a well known identifier (see below). | |||
* List of static descriptor names (must be declared PROGMEM if in flash): | |||
* char usbDescriptorDevice[]; | |||
* char usbDescriptorConfiguration[]; | |||
* char usbDescriptorHidReport[]; | |||
* char usbDescriptorString0[]; | |||
* int usbDescriptorStringVendor[]; | |||
* int usbDescriptorStringDevice[]; | |||
* int usbDescriptorStringSerialNumber[]; | |||
* Other descriptors can't be provided statically, they must be provided | |||
* dynamically at runtime. | |||
* | |||
* Descriptor properties are or-ed or added together, e.g.: | |||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) | |||
* | |||
* The following descriptors are defined: | |||
* USB_CFG_DESCR_PROPS_DEVICE | |||
* USB_CFG_DESCR_PROPS_CONFIGURATION | |||
* USB_CFG_DESCR_PROPS_STRINGS | |||
* USB_CFG_DESCR_PROPS_STRING_0 | |||
* USB_CFG_DESCR_PROPS_STRING_VENDOR | |||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT | |||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER | |||
* USB_CFG_DESCR_PROPS_HID | |||
* USB_CFG_DESCR_PROPS_HID_REPORT | |||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) | |||
* | |||
* Note about string descriptors: String descriptors are not just strings, they | |||
* are Unicode strings prefixed with a 2 byte header. Example: | |||
* int serialNumberDescriptor[] = { | |||
* USB_STRING_DESCRIPTOR_HEADER(6), | |||
* 'S', 'e', 'r', 'i', 'a', 'l' | |||
* }; | |||
*/ | |||
#define USB_CFG_DESCR_PROPS_DEVICE 0 | |||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC | |||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 | |||
#define USB_CFG_DESCR_PROPS_STRINGS 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_0 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 | |||
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC | |||
//#define USB_CFG_DESCR_PROPS_HID 0 | |||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC | |||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 | |||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0 | |||
#define usbMsgPtr_t unsigned short | |||
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to | |||
* a scalar type here because gcc generates slightly shorter code for scalar | |||
* arithmetics than for pointer arithmetics. Remove this define for backward | |||
* type compatibility or define it to an 8 bit type if you use data in RAM only | |||
* and all RAM is below 256 bytes (tiny memory model in IAR CC). | |||
*/ | |||
/* ----------------------- Optional MCU Description ------------------------ */ | |||
/* The following configurations have working defaults in usbdrv.h. You | |||
* usually don't need to set them explicitly. Only if you want to run | |||
* the driver on a device which is not yet supported or with a compiler | |||
* which is not fully supported (such as IAR C) or if you use a differnt | |||
* interrupt than INT0, you may have to define some of these. | |||
*/ | |||
/* #define USB_INTR_CFG MCUCR */ | |||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ | |||
/* #define USB_INTR_CFG_CLR 0 */ | |||
/* #define USB_INTR_ENABLE GIMSK */ | |||
/* #define USB_INTR_ENABLE_BIT INT0 */ | |||
/* #define USB_INTR_PENDING GIFR */ | |||
/* #define USB_INTR_PENDING_BIT INTF0 */ | |||
/* #define USB_INTR_VECTOR INT0_vect */ | |||
/* Set INT1 for D- falling edge to count SOF */ | |||
/* #define USB_INTR_CFG EICRA */ | |||
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) | |||
/* #define USB_INTR_CFG_CLR 0 */ | |||
/* #define USB_INTR_ENABLE EIMSK */ | |||
#define USB_INTR_ENABLE_BIT INT1 | |||
/* #define USB_INTR_PENDING EIFR */ | |||
#define USB_INTR_PENDING_BIT INTF1 | |||
#define USB_INTR_VECTOR INT1_vect | |||
#endif /* __usbconfig_h_included__ */ |