* add runner3680 * Remove unnecessary codepull/6091/head
@ -0,0 +1 @@ | |||
#include "3x6.h" |
@ -0,0 +1,19 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ R05, R04, R03, R02, R01, R00 }, \ | |||
{ R15, R14, R13, R12, R11, R10 }, \ | |||
{ R25, R24, R23, R22, R21, R20 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7 } | |||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 70 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,86 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-----------------------------------------. ,-----------------------------------------. | |||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | | |||
* `-----------------------------------------' `-----------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS | |||
), | |||
/* Adjust | |||
* ,-----------------------------------------. ,-----------------------------------------. | |||
* | |RGBRST| RESET| | | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | TOG | HUI | SAI | VAI | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | MOD | HUD | SAD | VAD | | | | | | | | | | |||
* `-----------------------------------------' `-----------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "3x7.h" |
@ -0,0 +1,19 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7 } | |||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 70 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,86 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | | |||
* `------------------------------------------------' `------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, | |||
KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP | |||
), | |||
/* Adjust | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | | |RGBRST| RESET| | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | TOG | HUI | SAI | VAI | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | MOD | HUD | SAD | VAD | | | | | | | | | | | |||
* `------------------------------------------------' `------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "3x8.h" |
@ -0,0 +1,19 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \ | |||
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R27, R26, R25, R24, R23, R22, R21, R20 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 80 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,88 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, | |||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT | |||
), | |||
/* Adjust | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | | | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "4x6.h" |
@ -0,0 +1,22 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ R05, R04, R03, R02, R01, R00 }, \ | |||
{ R15, R14, R13, R12, R11, R10 }, \ | |||
{ R25, R24, R23, R22, R21, R20 }, \ | |||
{ R35, R34, R33, R32, R31, R30 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 70 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,92 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-----------------------------------------. ,-----------------------------------------. | |||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | | |||
* `-----------------------------------------' `-----------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, | |||
KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT | |||
), | |||
/* Adjust | |||
* ,-----------------------------------------. ,-----------------------------------------. | |||
* | |RGBRST| RESET| | | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | TOG | HUI | SAI | VAI | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | MOD | HUD | SAD | VAD | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | |||
* `-----------------------------------------' `-----------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "4x7.h" |
@ -0,0 +1,22 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ R36, R35, R34, R33, R32, R31, R30 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 70 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,92 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | | |||
* `------------------------------------------------' `------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, | |||
KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, | |||
KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN | |||
), | |||
/* Adjust | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | | |RGBRST| RESET| | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | TOG | HUI | SAI | VAI | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | MOD | HUD | SAD | VAD | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | |||
* `------------------------------------------------' `------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "4x8.h" |
@ -0,0 +1,22 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \ | |||
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36, L37 }, \ | |||
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R27, R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ R37, R36, R35, R34, R33, R32, R31, R30 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 80 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,92 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right| | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, | |||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, | |||
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
/* Adjust | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | | | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "5x6.h" |
@ -0,0 +1,25 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ R05, R04, R03, R02, R01, R00 }, \ | |||
{ R15, R14, R13, R12, R11, R10 }, \ | |||
{ R25, R24, R23, R22, R21, R20 }, \ | |||
{ R35, R34, R33, R32, R31, R30 }, \ | |||
{ R45, R44, R43, R42, R41, R40 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 70 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,98 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-----------------------------------------. ,-----------------------------------------. | |||
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | | |||
* `-----------------------------------------' `-----------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, | |||
KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT | |||
), | |||
/* Adjust | |||
* ,-----------------------------------------. ,-----------------------------------------. | |||
* | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | |RGBRST| RESET| | | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | TOG | HUI | SAI | VAI | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | MOD | HUD | SAD | VAD | | | | | | | | | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | |||
* `-----------------------------------------' `-----------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( \ | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "5x7.h" |
@ -0,0 +1,25 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ | |||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||
{ L40, L41, L42, L43, L44, L45, L46 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ R36, R35, R34, R33, R32, R31, R30 }, \ | |||
{ R46, R45, R44, R43, R42, R41, R40 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 70 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,98 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | F1 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F2 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F3 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F4 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Shift| | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | F5 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | | |||
* `------------------------------------------------' `------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( \ | |||
KC_F1, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ | |||
KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \ | |||
KC_F3, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ | |||
KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_RSFT, \ | |||
KC_F5, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, ADJUST, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \ | |||
), | |||
/* Adjust | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | |RGBRST| RESET| | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | TOG | HUI | SAI | VAI | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | MOD | HUD | SAD | VAD | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | |||
* `------------------------------------------------' `------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( \ | |||
_______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ | |||
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
#include "5x8.h" |
@ -0,0 +1,25 @@ | |||
#pragma once | |||
#include "runner3680.h" | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \ | |||
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ | |||
L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36, L37 }, \ | |||
{ L40, L41, L42, L43, L44, L45, L46, L47 }, \ | |||
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R27, R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ R37, R36, R35, R34, R33, R32, R31, R30 }, \ | |||
{ R47, R46, R45, R44, R43, R42, R41, R40 } \ | |||
} |
@ -0,0 +1,67 @@ | |||
/* Copyright 2019 omkbd | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0005 | |||
#define MANUFACTURER Omkbd | |||
#define PRODUCT runner3680 | |||
#define DESCRIPTION A split keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
/* define tapping term */ | |||
#define TAPPING_TERM 120 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 80 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs | |||
#define SOFT_SERIAL_PIN D2 | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/*Sets the protocol speed when using serial communication*/ | |||
//Speeds: | |||
//0: about 189kbps (Experimental only) | |||
//1: about 137kbps (default) | |||
//2: about 75kbps | |||
//3: about 39kbps | |||
//4: about 26kbps | |||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,99 @@ | |||
#include QMK_KEYBOARD_H | |||
#include "keymap_jp.h" | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | F1 | F2 | EISU | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | ^ | \ | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | @ | [ | Bksp | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | : | ; | ] | Enter| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F9 | F10 | Ctrl | GUI | Alt | MHEN | Del | Space| | Enter| Bksp | HENK |Adjust| F10 | Left | Down | Right| | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
RGBRST , RGB_TOG, JP_ZHTG, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, JP_YEN, | |||
RGB_MOD, RGB_SAI, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_BSPC, | |||
RGB_SAI, RGB_SAD, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, JP_RBRC, KC_ENT, | |||
RGB_VAI, RGB_VAD, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT, | |||
_______, _______, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_HENK, ADJUST, KC_F10, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
/* Adjust | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | | | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1,9 @@ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,98 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
rgblight_config_t RGB_current_config; | |||
#endif | |||
enum layer_number { | |||
_QWERTY = 0, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
ADJUST, | |||
RGBRST | |||
}; | |||
// Fillers to make layering more clear | |||
#define EISU LALT(KC_GRV) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* QWERTY | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | F1 | F2 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = | Del | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right| | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, | |||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, | |||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, | |||
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
/* Adjust | |||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||
* | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | | | |||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
_______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
print("mode just switched to qwerty and this is a huge string\n"); | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
break; | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_config = rgblight_config; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1,3 @@ | |||
#pragma once | |||
#include "config_common.h" |
@ -0,0 +1,15 @@ | |||
# runner3680 | |||
![runner3680](https://github.com/omkbd/Runner3680/blob/master/Picture/Runner3680.jpg) | |||
A split ortholinear keyboard. Each half is a 5x8 arrangement, with breakable pieces to allow the number of rows to be customized between 3 to 5, and the number of columns to be between 6 to 8. | |||
Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd) | |||
Hardware Supported: Runner3680, Pro Micro ATmega32u4 | |||
Hardware Availability: Order your own [yourself](https://github.com/omkbd/Runner3680) | |||
Make example for this keyboard (after setting up your build environment): | |||
make runner3680/5x8:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,60 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
F_CPU = 16000000 | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = caterina | |||
# If you don't know the bootloader type, then you can specify the | |||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||
SPLIT_KEYBOARD = yes # Enables split keyboard support | |||
DEFAULT_FOLDER = runner3680/5x8 |
@ -0,0 +1 @@ | |||
#include "runner3680.h" |
@ -0,0 +1,39 @@ | |||
#pragma once | |||
#include "quantum.h" | |||
#ifdef KEYBOARD_runner3680_5x8 | |||
#include "5x8.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_5x7 | |||
#include "5x7.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_5x6 | |||
#include "5x6.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_4x8 | |||
#include "4x8.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_4x7 | |||
#include "4x7.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_4x6 | |||
#include "4x6.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_3x8 | |||
#include "3x8.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_3x7 | |||
#include "3x7.h" | |||
#endif | |||
#ifdef KEYBOARD_runner3680_3x6 | |||
#include "3x6.h" | |||
#endif |