Browse Source
Add board specific to Proton-C, with usual defaults turned on. (#10976)
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same outputpull/11111/head
Nick Brassel
3 years ago
committed by
GitHub
GitHub
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
65 changed files with 1659 additions and 17 deletions
Split View
Diff Options
-
+1 -3build_keyboard.mk
-
+1 -0docs/ja/proton_c_conversion.md
-
+1 -0docs/proton_c_conversion.md
-
+1 -0keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
-
+1 -0keyboards/acheron/shark/rules.mk
-
+1 -0keyboards/atreus/keymaps/ridingqwerty/rules.mk
-
+1 -0keyboards/boston_meetup/2019/rules.mk
-
+1 -0keyboards/c39/keymaps/drashna/rules.mk
-
+1 -0keyboards/ckeys/thedora/rules.mk
-
+1 -0keyboards/clueboard/60/rules.mk
-
+1 -0keyboards/clueboard/66/rev4/rules.mk
-
+1 -0keyboards/clueboard/66_hotswap/gen1/rules.mk
-
+1 -0keyboards/clueboard/california/rules.mk
-
+1 -0keyboards/dztech/dz60rgb/v1/rules.mk
-
+1 -0keyboards/dztech/dz60rgb_ansi/v1/rules.mk
-
+1 -0keyboards/dztech/dz60rgb_wkl/v1/rules.mk
-
+1 -0keyboards/dztech/dz65rgb/v1/rules.mk
-
+1 -0keyboards/hadron/ver3/rules.mk
-
+1 -0keyboards/handwired/co60/rev6/rules.mk
-
+1 -0keyboards/handwired/co60/rev7/rules.mk
-
+1 -0keyboards/handwired/d48/rules.mk
-
+1 -0keyboards/handwired/ddg_56/rules.mk
-
+1 -0keyboards/handwired/floorboard/rules.mk
-
+1 -0keyboards/handwired/onekey/proton_c/rules.mk
-
+1 -0keyboards/handwired/onekey/pytest/rules.mk
-
+1 -0keyboards/handwired/selene/rules.mk
-
+1 -0keyboards/handwired/sick_pad/rules.mk
-
+1 -0keyboards/handwired/steamvan/rev1/rules.mk
-
+1 -0keyboards/handwired/wulkan/rules.mk
-
+1 -0keyboards/hs60/v2/ansi/rules.mk
-
+1 -0keyboards/hs60/v2/hhkb/rules.mk
-
+1 -0keyboards/hs60/v2/iso/rules.mk
-
+1 -0keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk
-
+1 -0keyboards/kv/revt/rules.mk
-
+1 -0keyboards/mechlovin/adelais/rules.mk
-
+1 -0keyboards/mechlovin/hannah60rgb/rules.mk
-
+1 -0keyboards/mechlovin/hannah65/rules.mk
-
+1 -0keyboards/mechlovin/infinity87/rules.mk
-
+1 -0keyboards/mechlovin/infinity88/rules.mk
-
+1 -0keyboards/melgeek/mj61/rev1/rules.mk
-
+1 -0keyboards/melgeek/mj63/rev1/rules.mk
-
+1 -0keyboards/melgeek/mj64/rev1/rules.mk
-
+1 -0keyboards/melgeek/mj64/rev2/rules.mk
-
+1 -0keyboards/melgeek/mojo75/rev1/rules.mk
-
+1 -0keyboards/melgeek/z70ultra/rev1/rules.mk
-
+1 -0keyboards/moonlander/rules.mk
-
+1 -0keyboards/nebula68/rules.mk
-
+1 -0keyboards/nk65/rules.mk
-
+1 -0keyboards/nk87/rules.mk
-
+1 -0keyboards/planck/ez/rules.mk
-
+1 -0keyboards/planck/rev6/rules.mk
-
+1 -0keyboards/preonic/rev3/rules.mk
-
+1 -0keyboards/rgbkb/pan/rev1/proton_c/rules.mk
-
+1 -0keyboards/yugo_m/model_m_101/rules.mk
-
+11 -11platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h
-
+9 -0platforms/chibios/QMK_PROTON_C/board/board.mk
-
+37 -0platforms/chibios/QMK_PROTON_C/configs/board.h
-
+7 -0platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h
-
+714 -0platforms/chibios/QMK_PROTON_C/configs/chconf.h
-
+20 -0platforms/chibios/QMK_PROTON_C/configs/config.h
-
+525 -0platforms/chibios/QMK_PROTON_C/configs/halconf.h
-
+273 -0platforms/chibios/QMK_PROTON_C/configs/mcuconf.h
-
+5 -2platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk
-
+1 -1platforms/chibios/common/configs/halconf.h
-
+3 -0tmk_core/chibios.mk
+ 1
- 3
build_keyboard.mk
View File
+ 1
- 0
docs/ja/proton_c_conversion.md
View File
+ 1
- 0
docs/proton_c_conversion.md
View File
+ 1
- 0
keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
View File
+ 1
- 0
keyboards/acheron/shark/rules.mk
View File
+ 1
- 0
keyboards/atreus/keymaps/ridingqwerty/rules.mk
View File
+ 1
- 0
keyboards/boston_meetup/2019/rules.mk
View File
+ 1
- 0
keyboards/c39/keymaps/drashna/rules.mk
View File
+ 1
- 0
keyboards/ckeys/thedora/rules.mk
View File
+ 1
- 0
keyboards/clueboard/60/rules.mk
View File
+ 1
- 0
keyboards/clueboard/66/rev4/rules.mk
View File
+ 1
- 0
keyboards/clueboard/66_hotswap/gen1/rules.mk
View File
+ 1
- 0
keyboards/clueboard/california/rules.mk
View File
+ 1
- 0
keyboards/dztech/dz60rgb/v1/rules.mk
View File
+ 1
- 0
keyboards/dztech/dz60rgb_ansi/v1/rules.mk
View File
+ 1
- 0
keyboards/dztech/dz60rgb_wkl/v1/rules.mk
View File
+ 1
- 0
keyboards/dztech/dz65rgb/v1/rules.mk
View File
+ 1
- 0
keyboards/hadron/ver3/rules.mk
View File
+ 1
- 0
keyboards/handwired/co60/rev6/rules.mk
View File
+ 1
- 0
keyboards/handwired/co60/rev7/rules.mk
View File
+ 1
- 0
keyboards/handwired/d48/rules.mk
View File
+ 1
- 0
keyboards/handwired/ddg_56/rules.mk
View File
+ 1
- 0
keyboards/handwired/floorboard/rules.mk
View File
+ 1
- 0
keyboards/handwired/onekey/proton_c/rules.mk
View File
| @ -1,2 +1,3 @@ | |||
| # MCU name | |||
| MCU = STM32F303 | |||
| BOARD = QMK_PROTON_C | |||
+ 1
- 0
keyboards/handwired/onekey/pytest/rules.mk
View File
| @ -1,2 +1,3 @@ | |||
| # MCU name | |||
| MCU = STM32F303 | |||
| BOARD = QMK_PROTON_C | |||
+ 1
- 0
keyboards/handwired/selene/rules.mk
View File
+ 1
- 0
keyboards/handwired/sick_pad/rules.mk
View File
+ 1
- 0
keyboards/handwired/steamvan/rev1/rules.mk
View File
+ 1
- 0
keyboards/handwired/wulkan/rules.mk
View File
+ 1
- 0
keyboards/hs60/v2/ansi/rules.mk
View File
+ 1
- 0
keyboards/hs60/v2/hhkb/rules.mk
View File
+ 1
- 0
keyboards/hs60/v2/iso/rules.mk
View File
+ 1
- 0
keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk
View File
+ 1
- 0
keyboards/kv/revt/rules.mk
View File
+ 1
- 0
keyboards/mechlovin/adelais/rules.mk
View File
+ 1
- 0
keyboards/mechlovin/hannah60rgb/rules.mk
View File
+ 1
- 0
keyboards/mechlovin/hannah65/rules.mk
View File
+ 1
- 0
keyboards/mechlovin/infinity87/rules.mk
View File
+ 1
- 0
keyboards/mechlovin/infinity88/rules.mk
View File
+ 1
- 0
keyboards/melgeek/mj61/rev1/rules.mk
View File
+ 1
- 0
keyboards/melgeek/mj63/rev1/rules.mk
View File
+ 1
- 0
keyboards/melgeek/mj64/rev1/rules.mk
View File
+ 1
- 0
keyboards/melgeek/mj64/rev2/rules.mk
View File
+ 1
- 0
keyboards/melgeek/mojo75/rev1/rules.mk
View File
+ 1
- 0
keyboards/melgeek/z70ultra/rev1/rules.mk
View File
+ 1
- 0
keyboards/moonlander/rules.mk
View File
+ 1
- 0
keyboards/nebula68/rules.mk
View File
+ 1
- 0
keyboards/nk65/rules.mk
View File
+ 1
- 0
keyboards/nk87/rules.mk
View File
+ 1
- 0
keyboards/planck/ez/rules.mk
View File
+ 1
- 0
keyboards/planck/rev6/rules.mk
View File
+ 1
- 0
keyboards/preonic/rev3/rules.mk
View File
+ 1
- 0
keyboards/rgbkb/pan/rev1/proton_c/rules.mk
View File
| @ -1,2 +1,3 @@ | |||
| # MCU name | |||
| MCU = STM32F303 | |||
| BOARD = QMK_PROTON_C | |||
+ 1
- 0
keyboards/yugo_m/model_m_101/rules.mk
View File
+ 11
- 11
platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h
View File
+ 9
- 0
platforms/chibios/QMK_PROTON_C/board/board.mk
View File
| @ -0,0 +1,9 @@ | |||
| # List of all the board related files. | |||
| BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.c | |||
| # Required include directories | |||
| BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY | |||
| # Shared variables | |||
| ALLCSRC += $(BOARDSRC) | |||
| ALLINC += $(BOARDINC) | |||
+ 37
- 0
platforms/chibios/QMK_PROTON_C/configs/board.h
View File
| @ -0,0 +1,37 @@ | |||
| /* Copyright 2020 Nick Brassel (tzarc) | |||
| * | |||
| * This program is free software: you can redistribute it and/or modify | |||
| * it under the terms of the GNU General Public License as published by | |||
| * the Free Software Foundation, either version 3 of the License, or | |||
| * (at your option) any later version. | |||
| * | |||
| * This program is distributed in the hope that it will be useful, | |||
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
| * GNU General Public License for more details. | |||
| * | |||
| * You should have received a copy of the GNU General Public License | |||
| * along with this program. If not, see <https://www.gnu.org/licenses/>. | |||
| */ | |||
| #pragma once | |||
| #include_next "board.h" | |||
| #undef STM32_HSE_BYPASS | |||
| /* | |||
| * USB bus activation macro, required by the USB driver. | |||
| */ | |||
| #define usb_lld_connect_bus(usbp) \ | |||
| do { \ | |||
| palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)); \ | |||
| } while (0) | |||
| /* | |||
| * USB bus de-activation macro, required by the USB driver. | |||
| */ | |||
| #define usb_lld_disconnect_bus(usbp) \ | |||
| do { \ | |||
| palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL); \ | |||
| palClearPad(GPIOA, GPIOA_USB_DP); \ | |||
| } while (0) | |||
+ 7
- 0
platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h
View File
| @ -0,0 +1,7 @@ | |||
| /* Address for jumping to bootloader on STM32 chips. */ | |||
| /* It is chip dependent, the correct number can be looked up here: | |||
| * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||
| * This also requires a patch to chibios: | |||
| * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||
| */ | |||
| #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 | |||
+ 714
- 0
platforms/chibios/QMK_PROTON_C/configs/chconf.h
View File
| @ -0,0 +1,714 @@ | |||
| /* | |||
| ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
| Licensed under the Apache License, Version 2.0 (the "License"); | |||
| you may not use this file except in compliance with the License. | |||
| You may obtain a copy of the License at | |||
| http://www.apache.org/licenses/LICENSE-2.0 | |||
| Unless required by applicable law or agreed to in writing, software | |||
| distributed under the License is distributed on an "AS IS" BASIS, | |||
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
| See the License for the specific language governing permissions and | |||
| limitations under the License. | |||
| */ | |||
| /** | |||
| * @file rt/templates/chconf.h | |||
| * @brief Configuration file template. | |||
| * @details A copy of this file must be placed in each project directory, it | |||
| * contains the application specific kernel settings. | |||
| * | |||
| * @addtogroup config | |||
| * @details Kernel related settings and hooks. | |||
| * @{ | |||
| */ | |||
| #ifndef CHCONF_H | |||
| #define CHCONF_H | |||
| #define _CHIBIOS_RT_CONF_ | |||
| #define _CHIBIOS_RT_CONF_VER_6_0_ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name System timers settings | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief System time counter resolution. | |||
| * @note Allowed values are 16 or 32 bits. | |||
| */ | |||
| #if !defined(CH_CFG_ST_RESOLUTION) | |||
| #define CH_CFG_ST_RESOLUTION 32 | |||
| #endif | |||
| /** | |||
| * @brief System tick frequency. | |||
| * @details Frequency of the system timer that drives the system ticks. This | |||
| * setting also defines the system tick time unit. | |||
| */ | |||
| #if !defined(CH_CFG_ST_FREQUENCY) | |||
| #define CH_CFG_ST_FREQUENCY 100000 | |||
| #endif | |||
| /** | |||
| * @brief Time intervals data size. | |||
| * @note Allowed values are 16, 32 or 64 bits. | |||
| */ | |||
| #if !defined(CH_CFG_INTERVALS_SIZE) | |||
| #define CH_CFG_INTERVALS_SIZE 32 | |||
| #endif | |||
| /** | |||
| * @brief Time types data size. | |||
| * @note Allowed values are 16 or 32 bits. | |||
| */ | |||
| #if !defined(CH_CFG_TIME_TYPES_SIZE) | |||
| #define CH_CFG_TIME_TYPES_SIZE 32 | |||
| #endif | |||
| /** | |||
| * @brief Time delta constant for the tick-less mode. | |||
| * @note If this value is zero then the system uses the classic | |||
| * periodic tick. This value represents the minimum number | |||
| * of ticks that is safe to specify in a timeout directive. | |||
| * The value one is not valid, timeouts are rounded up to | |||
| * this value. | |||
| */ | |||
| #if !defined(CH_CFG_ST_TIMEDELTA) | |||
| #define CH_CFG_ST_TIMEDELTA 2 | |||
| #endif | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name Kernel parameters and options | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Round robin interval. | |||
| * @details This constant is the number of system ticks allowed for the | |||
| * threads before preemption occurs. Setting this value to zero | |||
| * disables the preemption for threads with equal priority and the | |||
| * round robin becomes cooperative. Note that higher priority | |||
| * threads can still preempt, the kernel is always preemptive. | |||
| * @note Disabling the round robin preemption makes the kernel more compact | |||
| * and generally faster. | |||
| * @note The round robin preemption is not supported in tickless mode and | |||
| * must be set to zero in that case. | |||
| */ | |||
| #if !defined(CH_CFG_TIME_QUANTUM) | |||
| #define CH_CFG_TIME_QUANTUM 0 | |||
| #endif | |||
| /** | |||
| * @brief Managed RAM size. | |||
| * @details Size of the RAM area to be managed by the OS. If set to zero | |||
| * then the whole available RAM is used. The core memory is made | |||
| * available to the heap allocator and/or can be used directly through | |||
| * the simplified core memory allocator. | |||
| * | |||
| * @note In order to let the OS manage the whole RAM the linker script must | |||
| * provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
| * @note Requires @p CH_CFG_USE_MEMCORE. | |||
| */ | |||
| #if !defined(CH_CFG_MEMCORE_SIZE) | |||
| #define CH_CFG_MEMCORE_SIZE 0 | |||
| #endif | |||
| /** | |||
| * @brief Idle thread automatic spawn suppression. | |||
| * @details When this option is activated the function @p chSysInit() | |||
| * does not spawn the idle thread. The application @p main() | |||
| * function becomes the idle thread and must implement an | |||
| * infinite loop. | |||
| */ | |||
| #if !defined(CH_CFG_NO_IDLE_THREAD) | |||
| #define CH_CFG_NO_IDLE_THREAD FALSE | |||
| #endif | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name Performance options | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief OS optimization. | |||
| * @details If enabled then time efficient rather than space efficient code | |||
| * is used when two possible implementations exist. | |||
| * | |||
| * @note This is not related to the compiler optimization options. | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_OPTIMIZE_SPEED) | |||
| #define CH_CFG_OPTIMIZE_SPEED TRUE | |||
| #endif | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name Subsystem options | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Time Measurement APIs. | |||
| * @details If enabled then the time measurement APIs are included in | |||
| * the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_TM) | |||
| #define CH_CFG_USE_TM TRUE | |||
| #endif | |||
| /** | |||
| * @brief Threads registry APIs. | |||
| * @details If enabled then the registry APIs are included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_REGISTRY) | |||
| #define CH_CFG_USE_REGISTRY TRUE | |||
| #endif | |||
| /** | |||
| * @brief Threads synchronization APIs. | |||
| * @details If enabled then the @p chThdWait() function is included in | |||
| * the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_WAITEXIT) | |||
| #define CH_CFG_USE_WAITEXIT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Semaphores APIs. | |||
| * @details If enabled then the Semaphores APIs are included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_SEMAPHORES) | |||
| #define CH_CFG_USE_SEMAPHORES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Semaphores queuing mode. | |||
| * @details If enabled then the threads are enqueued on semaphores by | |||
| * priority rather than in FIFO order. | |||
| * | |||
| * @note The default is @p FALSE. Enable this if you have special | |||
| * requirements. | |||
| * @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
| */ | |||
| #if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) | |||
| #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
| #endif | |||
| /** | |||
| * @brief Mutexes APIs. | |||
| * @details If enabled then the mutexes APIs are included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MUTEXES) | |||
| #define CH_CFG_USE_MUTEXES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables recursive behavior on mutexes. | |||
| * @note Recursive mutexes are heavier and have an increased | |||
| * memory footprint. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| * @note Requires @p CH_CFG_USE_MUTEXES. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) | |||
| #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
| #endif | |||
| /** | |||
| * @brief Conditional Variables APIs. | |||
| * @details If enabled then the conditional variables APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| * @note Requires @p CH_CFG_USE_MUTEXES. | |||
| */ | |||
| #if !defined(CH_CFG_USE_CONDVARS) | |||
| #define CH_CFG_USE_CONDVARS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Conditional Variables APIs with timeout. | |||
| * @details If enabled then the conditional variables APIs with timeout | |||
| * specification are included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| * @note Requires @p CH_CFG_USE_CONDVARS. | |||
| */ | |||
| #if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) | |||
| #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Events Flags APIs. | |||
| * @details If enabled then the event flags APIs are included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_EVENTS) | |||
| #define CH_CFG_USE_EVENTS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Events Flags APIs with timeout. | |||
| * @details If enabled then the events APIs with timeout specification | |||
| * are included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| * @note Requires @p CH_CFG_USE_EVENTS. | |||
| */ | |||
| #if !defined(CH_CFG_USE_EVENTS_TIMEOUT) | |||
| #define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Synchronous Messages APIs. | |||
| * @details If enabled then the synchronous messages APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MESSAGES) | |||
| #define CH_CFG_USE_MESSAGES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Synchronous Messages queuing mode. | |||
| * @details If enabled then messages are served by priority rather than in | |||
| * FIFO order. | |||
| * | |||
| * @note The default is @p FALSE. Enable this if you have special | |||
| * requirements. | |||
| * @note Requires @p CH_CFG_USE_MESSAGES. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MESSAGES_PRIORITY) | |||
| #define CH_CFG_USE_MESSAGES_PRIORITY TRUE | |||
| #endif | |||
| /** | |||
| * @brief Mailboxes APIs. | |||
| * @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
| * included in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| * @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MAILBOXES) | |||
| #define CH_CFG_USE_MAILBOXES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Core Memory Manager APIs. | |||
| * @details If enabled then the core memory manager APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MEMCORE) | |||
| #define CH_CFG_USE_MEMCORE TRUE | |||
| #endif | |||
| /** | |||
| * @brief Heap Allocator APIs. | |||
| * @details If enabled then the memory heap allocator APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
| * @p CH_CFG_USE_SEMAPHORES. | |||
| * @note Mutexes are recommended. | |||
| */ | |||
| #if !defined(CH_CFG_USE_HEAP) | |||
| #define CH_CFG_USE_HEAP TRUE | |||
| #endif | |||
| /** | |||
| * @brief Memory Pools Allocator APIs. | |||
| * @details If enabled then the memory pools allocator APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_MEMPOOLS) | |||
| #define CH_CFG_USE_MEMPOOLS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Objects FIFOs APIs. | |||
| * @details If enabled then the objects FIFOs APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_OBJ_FIFOS) | |||
| #define CH_CFG_USE_OBJ_FIFOS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Pipes APIs. | |||
| * @details If enabled then the pipes APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_PIPES) | |||
| #define CH_CFG_USE_PIPES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Dynamic Threads APIs. | |||
| * @details If enabled then the dynamic threads creation APIs are included | |||
| * in the kernel. | |||
| * | |||
| * @note The default is @p TRUE. | |||
| * @note Requires @p CH_CFG_USE_WAITEXIT. | |||
| * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
| */ | |||
| #if !defined(CH_CFG_USE_DYNAMIC) | |||
| #define CH_CFG_USE_DYNAMIC TRUE | |||
| #endif | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name Objects factory options | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Objects Factory APIs. | |||
| * @details If enabled then the objects factory APIs are included in the | |||
| * kernel. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| */ | |||
| #if !defined(CH_CFG_USE_FACTORY) | |||
| #define CH_CFG_USE_FACTORY TRUE | |||
| #endif | |||
| /** | |||
| * @brief Maximum length for object names. | |||
| * @details If the specified length is zero then the name is stored by | |||
| * pointer but this could have unintended side effects. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) | |||
| #define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 | |||
| #endif | |||
| /** | |||
| * @brief Enables the registry of generic objects. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) | |||
| #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables factory for generic buffers. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) | |||
| #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables factory for semaphores. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_SEMAPHORES) | |||
| #define CH_CFG_FACTORY_SEMAPHORES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables factory for mailboxes. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_MAILBOXES) | |||
| #define CH_CFG_FACTORY_MAILBOXES TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables factory for objects FIFOs. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_OBJ_FIFOS) | |||
| #define CH_CFG_FACTORY_OBJ_FIFOS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables factory for Pipes. | |||
| */ | |||
| #if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) | |||
| #define CH_CFG_FACTORY_PIPES TRUE | |||
| #endif | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name Debug options | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Debug option, kernel statistics. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| */ | |||
| #if !defined(CH_DBG_STATISTICS) | |||
| #define CH_DBG_STATISTICS FALSE | |||
| #endif | |||
| /** | |||
| * @brief Debug option, system state check. | |||
| * @details If enabled the correct call protocol for system APIs is checked | |||
| * at runtime. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| */ | |||
| #if !defined(CH_DBG_SYSTEM_STATE_CHECK) | |||
| #define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||
| #endif | |||
| /** | |||
| * @brief Debug option, parameters checks. | |||
| * @details If enabled then the checks on the API functions input | |||
| * parameters are activated. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| */ | |||
| #if !defined(CH_DBG_ENABLE_CHECKS) | |||
| #define CH_DBG_ENABLE_CHECKS FALSE | |||
| #endif | |||
| /** | |||
| * @brief Debug option, consistency checks. | |||
| * @details If enabled then all the assertions in the kernel code are | |||
| * activated. This includes consistency checks inside the kernel, | |||
| * runtime anomalies and port-defined checks. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| */ | |||
| #if !defined(CH_DBG_ENABLE_ASSERTS) | |||
| #define CH_DBG_ENABLE_ASSERTS FALSE | |||
| #endif | |||
| /** | |||
| * @brief Debug option, trace buffer. | |||
| * @details If enabled then the trace buffer is activated. | |||
| * | |||
| * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
| */ | |||
| #if !defined(CH_DBG_TRACE_MASK) | |||
| #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
| #endif | |||
| /** | |||
| * @brief Trace buffer entries. | |||
| * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
| * different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
| */ | |||
| #if !defined(CH_DBG_TRACE_BUFFER_SIZE) | |||
| #define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
| #endif | |||
| /** | |||
| * @brief Debug option, stack checks. | |||
| * @details If enabled then a runtime stack check is performed. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| * @note The stack check is performed in a architecture/port dependent way. | |||
| * It may not be implemented or some ports. | |||
| * @note The default failure mode is to halt the system with the global | |||
| * @p panic_msg variable set to @p NULL. | |||
| */ | |||
| #if !defined(CH_DBG_ENABLE_STACK_CHECK) | |||
| #define CH_DBG_ENABLE_STACK_CHECK TRUE | |||
| #endif | |||
| /** | |||
| * @brief Debug option, stacks initialization. | |||
| * @details If enabled then the threads working area is filled with a byte | |||
| * value when a thread is created. This can be useful for the | |||
| * runtime measurement of the used stack. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| */ | |||
| #if !defined(CH_DBG_FILL_THREADS) | |||
| #define CH_DBG_FILL_THREADS FALSE | |||
| #endif | |||
| /** | |||
| * @brief Debug option, threads profiling. | |||
| * @details If enabled then a field is added to the @p thread_t structure that | |||
| * counts the system ticks occurred while executing the thread. | |||
| * | |||
| * @note The default is @p FALSE. | |||
| * @note This debug option is not currently compatible with the | |||
| * tickless mode. | |||
| */ | |||
| #if !defined(CH_DBG_THREADS_PROFILING) | |||
| #define CH_DBG_THREADS_PROFILING FALSE | |||
| #endif | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @name Kernel hooks | |||
| * @{ | |||
| */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief System structure extension. | |||
| * @details User fields added to the end of the @p ch_system_t structure. | |||
| */ | |||
| #define CH_CFG_SYSTEM_EXTRA_FIELDS \ | |||
| /* Add threads custom fields here.*/ | |||
| /** | |||
| * @brief System initialization hook. | |||
| * @details User initialization code added to the @p chSysInit() function | |||
| * just before interrupts are enabled globally. | |||
| */ | |||
| #define CH_CFG_SYSTEM_INIT_HOOK() { \ | |||
| /* Add threads initialization code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Threads descriptor structure extension. | |||
| * @details User fields added to the end of the @p thread_t structure. | |||
| */ | |||
| #define CH_CFG_THREAD_EXTRA_FIELDS \ | |||
| /* Add threads custom fields here.*/ | |||
| /** | |||
| * @brief Threads initialization hook. | |||
| * @details User initialization code added to the @p _thread_init() function. | |||
| * | |||
| * @note It is invoked from within @p _thread_init() and implicitly from all | |||
| * the threads creation APIs. | |||
| */ | |||
| #define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||
| /* Add threads initialization code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Threads finalization hook. | |||
| * @details User finalization code added to the @p chThdExit() API. | |||
| */ | |||
| #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||
| /* Add threads finalization code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Context switch hook. | |||
| * @details This hook is invoked just before switching between threads. | |||
| */ | |||
| #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||
| /* Context switch code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief ISR enter hook. | |||
| */ | |||
| #define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||
| /* IRQ prologue code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief ISR exit hook. | |||
| */ | |||
| #define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||
| /* IRQ epilogue code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Idle thread enter hook. | |||
| * @note This hook is invoked within a critical zone, no OS functions | |||
| * should be invoked from here. | |||
| * @note This macro can be used to activate a power saving mode. | |||
| */ | |||
| #define CH_CFG_IDLE_ENTER_HOOK() { \ | |||
| /* Idle-enter code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Idle thread leave hook. | |||
| * @note This hook is invoked within a critical zone, no OS functions | |||
| * should be invoked from here. | |||
| * @note This macro can be used to deactivate a power saving mode. | |||
| */ | |||
| #define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||
| /* Idle-leave code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Idle Loop hook. | |||
| * @details This hook is continuously invoked by the idle thread loop. | |||
| */ | |||
| #define CH_CFG_IDLE_LOOP_HOOK() { \ | |||
| /* Idle loop code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief System tick event hook. | |||
| * @details This hook is invoked in the system tick handler immediately | |||
| * after processing the virtual timers queue. | |||
| */ | |||
| #define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||
| /* System tick event code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief System halt hook. | |||
| * @details This hook is invoked in case to a system halting error before | |||
| * the system is halted. | |||
| */ | |||
| #define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||
| /* System halt code here.*/ \ | |||
| } | |||
| /** | |||
| * @brief Trace hook. | |||
| * @details This hook is invoked each time a new record is written in the | |||
| * trace buffer. | |||
| */ | |||
| #define CH_CFG_TRACE_HOOK(tep) { \ | |||
| /* Trace code here.*/ \ | |||
| } | |||
| /** @} */ | |||
| /*===========================================================================*/ | |||
| /* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
| /*===========================================================================*/ | |||
| #endif /* CHCONF_H */ | |||
| /** @} */ | |||
+ 20
- 0
platforms/chibios/QMK_PROTON_C/configs/config.h
View File
| @ -0,0 +1,20 @@ | |||
| /* Copyright 2020 Nick Brassel (tzarc) | |||
| * | |||
| * This program is free software: you can redistribute it and/or modify | |||
| * it under the terms of the GNU General Public License as published by | |||
| * the Free Software Foundation, either version 3 of the License, or | |||
| * (at your option) any later version. | |||
| * | |||
| * This program is distributed in the hope that it will be useful, | |||
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
| * GNU General Public License for more details. | |||
| * | |||
| * You should have received a copy of the GNU General Public License | |||
| * along with this program. If not, see <https://www.gnu.org/licenses/>. | |||
| */ | |||
| #pragma once | |||
| #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP | |||
| # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE | |||
| #endif | |||
+ 525
- 0
platforms/chibios/QMK_PROTON_C/configs/halconf.h
View File
| @ -0,0 +1,525 @@ | |||
| /* | |||
| ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
| Licensed under the Apache License, Version 2.0 (the "License"); | |||
| you may not use this file except in compliance with the License. | |||
| You may obtain a copy of the License at | |||
| http://www.apache.org/licenses/LICENSE-2.0 | |||
| Unless required by applicable law or agreed to in writing, software | |||
| distributed under the License is distributed on an "AS IS" BASIS, | |||
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
| See the License for the specific language governing permissions and | |||
| limitations under the License. | |||
| */ | |||
| /** | |||
| * @file templates/halconf.h | |||
| * @brief HAL configuration header. | |||
| * @details HAL configuration file, this file allows to enable or disable the | |||
| * various device drivers from your application. You may also use | |||
| * this file in order to override the device drivers default settings. | |||
| * | |||
| * @addtogroup HAL_CONF | |||
| * @{ | |||
| */ | |||
| #ifndef HALCONF_H | |||
| #define HALCONF_H | |||
| #define _CHIBIOS_HAL_CONF_ | |||
| #define _CHIBIOS_HAL_CONF_VER_7_0_ | |||
| #include <mcuconf.h> | |||
| /** | |||
| * @brief Enables the PAL subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
| #define HAL_USE_PAL TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the ADC subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
| #define HAL_USE_ADC FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the CAN subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
| #define HAL_USE_CAN FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the cryptographic subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) | |||
| #define HAL_USE_CRY FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the DAC subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
| #define HAL_USE_DAC TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the GPT subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
| #define HAL_USE_GPT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the I2C subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
| #define HAL_USE_I2C TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the I2S subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
| #define HAL_USE_I2S FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the ICU subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
| #define HAL_USE_ICU FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the MAC subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
| #define HAL_USE_MAC FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the MMC_SPI subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
| #define HAL_USE_MMC_SPI FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the PWM subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
| #define HAL_USE_PWM TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the RTC subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
| #define HAL_USE_RTC FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the SDC subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
| #define HAL_USE_SDC FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the SERIAL subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
| #define HAL_USE_SERIAL FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the SERIAL over USB subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
| #define HAL_USE_SERIAL_USB TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the SIO subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) | |||
| #define HAL_USE_SIO FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the SPI subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
| #define HAL_USE_SPI TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the TRNG subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) | |||
| #define HAL_USE_TRNG FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the UART subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
| #define HAL_USE_UART FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the USB subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
| #define HAL_USE_USB TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the WDG subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
| #define HAL_USE_WDG FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the WSPI subsystem. | |||
| */ | |||
| #if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) | |||
| #define HAL_USE_WSPI FALSE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* PAL driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
| #define PAL_USE_CALLBACKS TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define PAL_USE_WAIT TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* ADC driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define ADC_USE_WAIT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
| #define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* CAN driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Sleep mode related APIs inclusion switch. | |||
| */ | |||
| #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
| #define CAN_USE_SLEEP_MODE TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enforces the driver to use direct callbacks rather than OSAL events. | |||
| */ | |||
| #if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
| #define CAN_ENFORCE_USE_CALLBACKS FALSE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* CRY driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables the SW fall-back of the cryptographic driver. | |||
| * @details When enabled, this option, activates a fall-back software | |||
| * implementation for algorithms not supported by the underlying | |||
| * hardware. | |||
| * @note Fall-back implementations may not be present for all algorithms. | |||
| */ | |||
| #if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) | |||
| #define HAL_CRY_USE_FALLBACK FALSE | |||
| #endif | |||
| /** | |||
| * @brief Makes the driver forcibly use the fall-back implementations. | |||
| */ | |||
| #if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) | |||
| #define HAL_CRY_ENFORCE_FALLBACK FALSE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* DAC driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define DAC_USE_WAIT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
| #define DAC_USE_MUTUAL_EXCLUSION TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* I2C driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables the mutual exclusion APIs on the I2C bus. | |||
| */ | |||
| #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
| #define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* MAC driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables the zero-copy API. | |||
| */ | |||
| #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
| #define MAC_USE_ZERO_COPY FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables an event sources for incoming packets. | |||
| */ | |||
| #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
| #define MAC_USE_EVENTS TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* MMC_SPI driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Delays insertions. | |||
| * @details If enabled this options inserts delays into the MMC waiting | |||
| * routines releasing some extra CPU time for the threads with | |||
| * lower priority, this may slow down the driver a bit however. | |||
| * This option is recommended also if the SPI driver does not | |||
| * use a DMA channel and heavily loads the CPU. | |||
| */ | |||
| #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
| #define MMC_NICE_WAITING TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* SDC driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Number of initialization attempts before rejecting the card. | |||
| * @note Attempts are performed at 10mS intervals. | |||
| */ | |||
| #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
| #define SDC_INIT_RETRY 100 | |||
| #endif | |||
| /** | |||
| * @brief Include support for MMC cards. | |||
| * @note MMC support is not yet implemented so this option must be kept | |||
| * at @p FALSE. | |||
| */ | |||
| #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
| #define SDC_MMC_SUPPORT FALSE | |||
| #endif | |||
| /** | |||
| * @brief Delays insertions. | |||
| * @details If enabled this options inserts delays into the MMC waiting | |||
| * routines releasing some extra CPU time for the threads with | |||
| * lower priority, this may slow down the driver a bit however. | |||
| */ | |||
| #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
| #define SDC_NICE_WAITING TRUE | |||
| #endif | |||
| /** | |||
| * @brief OCR initialization constant for V20 cards. | |||
| */ | |||
| #if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) | |||
| #define SDC_INIT_OCR_V20 0x50FF8000U | |||
| #endif | |||
| /** | |||
| * @brief OCR initialization constant for non-V20 cards. | |||
| */ | |||
| #if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) | |||
| #define SDC_INIT_OCR 0x80100000U | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* SERIAL driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Default bit rate. | |||
| * @details Configuration parameter, this is the baud rate selected for the | |||
| * default configuration. | |||
| */ | |||
| #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
| #define SERIAL_DEFAULT_BITRATE 38400 | |||
| #endif | |||
| /** | |||
| * @brief Serial buffers size. | |||
| * @details Configuration parameter, you can change the depth of the queue | |||
| * buffers depending on the requirements of your application. | |||
| * @note The default is 16 bytes for both the transmission and receive | |||
| * buffers. | |||
| */ | |||
| #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
| #define SERIAL_BUFFERS_SIZE 16 | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* SERIAL_USB driver related setting. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Serial over USB buffers size. | |||
| * @details Configuration parameter, the buffer size must be a multiple of | |||
| * the USB data endpoint maximum packet size. | |||
| * @note The default is 256 bytes for both the transmission and receive | |||
| * buffers. | |||
| */ | |||
| #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
| #define SERIAL_USB_BUFFERS_SIZE 1 | |||
| #endif | |||
| /** | |||
| * @brief Serial over USB number of buffers. | |||
| * @note The default is 2 buffers. | |||
| */ | |||
| #if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||
| #define SERIAL_USB_BUFFERS_NUMBER 2 | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* SPI driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define SPI_USE_WAIT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables circular transfers APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) | |||
| #define SPI_USE_CIRCULAR FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
| #define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
| #endif | |||
| /** | |||
| * @brief Handling method for SPI CS line. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) | |||
| #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* UART driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define UART_USE_WAIT FALSE | |||
| #endif | |||
| /** | |||
| * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
| #define UART_USE_MUTUAL_EXCLUSION FALSE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* USB driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define USB_USE_WAIT TRUE | |||
| #endif | |||
| /*===========================================================================*/ | |||
| /* WSPI driver related settings. */ | |||
| /*===========================================================================*/ | |||
| /** | |||
| * @brief Enables synchronous APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) | |||
| #define WSPI_USE_WAIT TRUE | |||
| #endif | |||
| /** | |||
| * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. | |||
| * @note Disabling this option saves both code and data space. | |||
| */ | |||
| #if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
| #define WSPI_USE_MUTUAL_EXCLUSION TRUE | |||
| #endif | |||
| #endif /* HALCONF_H */ | |||
| /** @} */ | |||
+ 273
- 0
platforms/chibios/QMK_PROTON_C/configs/mcuconf.h
View File
| @ -0,0 +1,273 @@ | |||
| /* | |||
| ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
| Licensed under the Apache License, Version 2.0 (the "License"); | |||
| you may not use this file except in compliance with the License. | |||
| You may obtain a copy of the License at | |||
| http://www.apache.org/licenses/LICENSE-2.0 | |||
| Unless required by applicable law or agreed to in writing, software | |||
| distributed under the License is distributed on an "AS IS" BASIS, | |||
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
| See the License for the specific language governing permissions and | |||
| limitations under the License. | |||
| */ | |||
| #ifndef MCUCONF_H | |||
| #define MCUCONF_H | |||
| /* | |||
| * STM32F3xx drivers configuration. | |||
| * The following settings override the default settings present in | |||
| * the various device driver implementation headers. | |||
| * Note that the settings for each driver only have effect if the whole | |||
| * driver is enabled in halconf.h. | |||
| * | |||
| * IRQ priorities: | |||
| * 15...0 Lowest...Highest. | |||
| * | |||
| * DMA priorities: | |||
| * 0...3 Lowest...Highest. | |||
| */ | |||
| #define STM32F3xx_MCUCONF | |||
| #define STM32F303_MCUCONF | |||
| /* | |||
| * HAL driver system settings. | |||
| */ | |||
| #define STM32_NO_INIT FALSE | |||
| #define STM32_PVD_ENABLE FALSE | |||
| #define STM32_PLS STM32_PLS_LEV0 | |||
| #define STM32_HSI_ENABLED TRUE | |||
| #define STM32_LSI_ENABLED TRUE | |||
| #define STM32_HSE_ENABLED TRUE | |||
| #define STM32_LSE_ENABLED FALSE | |||
| #define STM32_SW STM32_SW_PLL | |||
| #define STM32_PLLSRC STM32_PLLSRC_HSE | |||
| #define STM32_PREDIV_VALUE 1 | |||
| #define STM32_PLLMUL_VALUE 9 | |||
| #define STM32_HPRE STM32_HPRE_DIV1 | |||
| #define STM32_PPRE1 STM32_PPRE1_DIV2 | |||
| #define STM32_PPRE2 STM32_PPRE2_DIV2 | |||
| #define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | |||
| #define STM32_ADC12PRES STM32_ADC12PRES_DIV1 | |||
| #define STM32_ADC34PRES STM32_ADC34PRES_DIV1 | |||
| #define STM32_USART1SW STM32_USART1SW_PCLK | |||
| #define STM32_USART2SW STM32_USART2SW_PCLK | |||
| #define STM32_USART3SW STM32_USART3SW_PCLK | |||
| #define STM32_UART4SW STM32_UART4SW_PCLK | |||
| #define STM32_UART5SW STM32_UART5SW_PCLK | |||
| #define STM32_I2C1SW STM32_I2C1SW_SYSCLK | |||
| #define STM32_I2C2SW STM32_I2C2SW_SYSCLK | |||
| #define STM32_TIM1SW STM32_TIM1SW_PCLK2 | |||
| #define STM32_TIM8SW STM32_TIM8SW_PCLK2 | |||
| #define STM32_RTCSEL STM32_RTCSEL_LSI | |||
| #define STM32_USB_CLOCK_REQUIRED TRUE | |||
| #define STM32_USBPRE STM32_USBPRE_DIV1P5 | |||
| /* | |||
| * IRQ system settings. | |||
| */ | |||
| #define STM32_IRQ_EXTI0_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI1_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI2_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI3_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI4_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI5_9_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI10_15_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI16_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI17_PRIORITY 15 | |||
| #define STM32_IRQ_EXTI18_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI19_PRIORITY 15 | |||
| #define STM32_IRQ_EXTI20_PRIORITY 15 | |||
| #define STM32_IRQ_EXTI21_22_29_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI30_32_PRIORITY 6 | |||
| #define STM32_IRQ_EXTI33_PRIORITY 6 | |||
| #define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 | |||
| #define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 | |||
| #define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 | |||
| #define STM32_IRQ_TIM1_CC_PRIORITY 7 | |||
| /* | |||
| * ADC driver system settings. | |||
| */ | |||
| #define STM32_ADC_DUAL_MODE FALSE | |||
| #define STM32_ADC_COMPACT_SAMPLES FALSE | |||
| #define STM32_ADC_USE_ADC1 FALSE | |||
| #define STM32_ADC_USE_ADC2 FALSE | |||
| #define STM32_ADC_USE_ADC3 FALSE | |||
| #define STM32_ADC_USE_ADC4 FALSE | |||
| #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) | |||
| #define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) | |||
| #define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) | |||
| #define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) | |||
| #define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
| #define STM32_ADC_ADC2_DMA_PRIORITY 2 | |||
| #define STM32_ADC_ADC3_DMA_PRIORITY 2 | |||
| #define STM32_ADC_ADC4_DMA_PRIORITY 2 | |||
| #define STM32_ADC_ADC12_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC3_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC4_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 | |||
| #define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 | |||
| #define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 | |||
| /* | |||
| * CAN driver system settings. | |||
| */ | |||
| #define STM32_CAN_USE_CAN1 FALSE | |||
| #define STM32_CAN_CAN1_IRQ_PRIORITY 11 | |||
| /* | |||
| * DAC driver system settings. | |||
| */ | |||
| #define STM32_DAC_DUAL_MODE FALSE | |||
| #define STM32_DAC_USE_DAC1_CH1 TRUE | |||
| #define STM32_DAC_USE_DAC1_CH2 TRUE | |||
| #define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 | |||
| #define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 | |||
| #define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 | |||
| #define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 | |||
| /* | |||
| * GPT driver system settings. | |||
| */ | |||
| #define STM32_GPT_USE_TIM1 FALSE | |||
| #define STM32_GPT_USE_TIM2 FALSE | |||
| #define STM32_GPT_USE_TIM3 FALSE | |||
| #define STM32_GPT_USE_TIM4 FALSE | |||
| #define STM32_GPT_USE_TIM6 TRUE | |||
| #define STM32_GPT_USE_TIM7 TRUE | |||
| #define STM32_GPT_USE_TIM8 TRUE | |||
| #define STM32_GPT_USE_TIM15 TRUE | |||
| #define STM32_GPT_USE_TIM16 FALSE | |||
| #define STM32_GPT_USE_TIM17 FALSE | |||
| #define STM32_GPT_TIM1_IRQ_PRIORITY 7 | |||
| #define STM32_GPT_TIM2_IRQ_PRIORITY 7 | |||
| #define STM32_GPT_TIM3_IRQ_PRIORITY 7 | |||
| #define STM32_GPT_TIM4_IRQ_PRIORITY 7 | |||
| #define STM32_GPT_TIM6_IRQ_PRIORITY 7 | |||
| #define STM32_GPT_TIM7_IRQ_PRIORITY 7 | |||
| #define STM32_GPT_TIM8_IRQ_PRIORITY 7 | |||
| /* | |||
| * I2C driver system settings. | |||
| */ | |||
| #define STM32_I2C_USE_I2C1 TRUE | |||
| #define STM32_I2C_USE_I2C2 FALSE | |||
| #define STM32_I2C_BUSY_TIMEOUT 50 | |||
| #define STM32_I2C_I2C1_IRQ_PRIORITY 10 | |||
| #define STM32_I2C_I2C2_IRQ_PRIORITY 10 | |||
| #define STM32_I2C_USE_DMA TRUE | |||
| #define STM32_I2C_I2C1_DMA_PRIORITY 1 | |||
| #define STM32_I2C_I2C2_DMA_PRIORITY 1 | |||
| #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
| /* | |||
| * ICU driver system settings. | |||
| */ | |||
| #define STM32_ICU_USE_TIM1 FALSE | |||
| #define STM32_ICU_USE_TIM2 FALSE | |||
| #define STM32_ICU_USE_TIM3 FALSE | |||
| #define STM32_ICU_USE_TIM4 FALSE | |||
| #define STM32_ICU_USE_TIM8 FALSE | |||
| #define STM32_ICU_USE_TIM15 FALSE | |||
| #define STM32_ICU_TIM1_IRQ_PRIORITY 7 | |||
| #define STM32_ICU_TIM2_IRQ_PRIORITY 7 | |||
| #define STM32_ICU_TIM3_IRQ_PRIORITY 7 | |||
| #define STM32_ICU_TIM4_IRQ_PRIORITY 7 | |||
| #define STM32_ICU_TIM8_IRQ_PRIORITY 7 | |||
| /* | |||
| * PWM driver system settings. | |||
| */ | |||
| #define STM32_PWM_USE_ADVANCED FALSE | |||
| #define STM32_PWM_USE_TIM1 FALSE | |||
| #define STM32_PWM_USE_TIM2 FALSE | |||
| #define STM32_PWM_USE_TIM3 TRUE | |||
| #define STM32_PWM_USE_TIM4 TRUE | |||
| #define STM32_PWM_USE_TIM8 FALSE | |||
| #define STM32_PWM_USE_TIM15 FALSE | |||
| #define STM32_PWM_USE_TIM16 FALSE | |||
| #define STM32_PWM_USE_TIM17 FALSE | |||
| #define STM32_PWM_TIM1_IRQ_PRIORITY 7 | |||
| #define STM32_PWM_TIM2_IRQ_PRIORITY 7 | |||
| #define STM32_PWM_TIM3_IRQ_PRIORITY 7 | |||
| #define STM32_PWM_TIM4_IRQ_PRIORITY 7 | |||
| #define STM32_PWM_TIM8_IRQ_PRIORITY 7 | |||
| /* | |||
| * RTC driver system settings. | |||
| */ | |||
| #define STM32_RTC_PRESA_VALUE 32 | |||
| #define STM32_RTC_PRESS_VALUE 1024 | |||
| #define STM32_RTC_CR_INIT 0 | |||
| #define STM32_RTC_TAMPCR_INIT 0 | |||
| /* | |||
| * SERIAL driver system settings. | |||
| */ | |||
| #define STM32_SERIAL_USE_USART1 FALSE | |||
| #define STM32_SERIAL_USE_USART2 TRUE | |||
| #define STM32_SERIAL_USE_USART3 FALSE | |||
| #define STM32_SERIAL_USE_UART4 FALSE | |||
| #define STM32_SERIAL_USE_UART5 FALSE | |||
| #define STM32_SERIAL_USART1_PRIORITY 12 | |||
| #define STM32_SERIAL_USART2_PRIORITY 12 | |||
| #define STM32_SERIAL_USART3_PRIORITY 12 | |||
| #define STM32_SERIAL_UART4_PRIORITY 12 | |||
| #define STM32_SERIAL_UART5_PRIORITY 12 | |||
| /* | |||
| * SPI driver system settings. | |||
| */ | |||
| #define STM32_SPI_USE_SPI1 FALSE | |||
| #define STM32_SPI_USE_SPI2 TRUE | |||
| #define STM32_SPI_USE_SPI3 FALSE | |||
| #define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
| #define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
| #define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||
| #define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||
| #define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||
| #define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||
| #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
| /* | |||
| * ST driver system settings. | |||
| */ | |||
| #define STM32_ST_IRQ_PRIORITY 8 | |||
| #define STM32_ST_USE_TIMER 2 | |||
| /* | |||
| * UART driver system settings. | |||
| */ | |||
| #define STM32_UART_USE_USART1 FALSE | |||
| #define STM32_UART_USE_USART2 FALSE | |||
| #define STM32_UART_USE_USART3 FALSE | |||
| #define STM32_UART_USART1_IRQ_PRIORITY 12 | |||
| #define STM32_UART_USART2_IRQ_PRIORITY 12 | |||
| #define STM32_UART_USART3_IRQ_PRIORITY 12 | |||
| #define STM32_UART_USART1_DMA_PRIORITY 0 | |||
| #define STM32_UART_USART2_DMA_PRIORITY 0 | |||
| #define STM32_UART_USART3_DMA_PRIORITY 0 | |||
| #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
| /* | |||
| * USB driver system settings. | |||
| */ | |||
| #define STM32_USB_USE_USB1 TRUE | |||
| #define STM32_USB_LOW_POWER_ON_SUSPEND FALSE | |||
| #define STM32_USB_USB1_HP_IRQ_PRIORITY 13 | |||
| #define STM32_USB_USB1_LP_IRQ_PRIORITY 14 | |||
| /* | |||
| * WDG driver system settings. | |||
| */ | |||
| #define STM32_WDG_USE_IWDG FALSE | |||
| #endif /* MCUCONF_H */ | |||
platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk → platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk
View File
| @ -1,9 +1,12 @@ | |||
| # Proton C MCU settings for converting AVR projects | |||
| MCU = STM32F303 | |||
| TARGET := $(TARGET)_proton_c | |||
| MCU := STM32F303 | |||
| BOARD := QMK_PROTON_C | |||
| OPT_DEFS += -DCONVERT_TO_PROTON_C | |||
| # These are defaults based on what has been implemented for ARM boards | |||
| AUDIO_ENABLE = yes | |||
| WS2812_DRIVER = bitbang | |||
| # Force task driven PWM until ARM can provide automatic configuration | |||
| BACKLIGHT_DRIVER = software | |||
| BACKLIGHT_DRIVER = software | |||