* Set up Bonsai C4 as a platform board file * corrections and improvements based on testing and feedback * Added VBUS sensing as default capability for improved split support using Bonsai C4 * Update clock divisor for SPI flash Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>pull/19072/head
@ -1,23 +0,0 @@ | |||||
/* Copyright 2022 customMK | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
// Set up SPI slave select pin | |||||
void keyboard_post_init_kb(void) { | |||||
#ifdef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN | |||||
setPinOutput(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); | |||||
writePinHigh(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); | |||||
#endif | |||||
} |
@ -1,79 +0,0 @@ | |||||
/* Copyright 2022 customMK | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
// This file includes example #defines to enable commonly-used functionality | |||||
// (SPI, PWM backlight, etc.) on specific pins. Capabilities you want to include | |||||
// should be added to the config.h for your keyboard. Not all capabilities are | |||||
// shown; for example: | |||||
// I2C is not shown because the QMK defaults are sufficient for SCL on B6 and SDA on B7 | |||||
// Serial communications (for split keyboards) is not shown because QMK defaults work | |||||
// for either pins A15 or B6 | |||||
// If you need to change pins for PWM, SPI, I2C, or Serial communications, be aware that | |||||
// doing this may require changing the driver, channel, PAL (Pin ALternate function) mode, | |||||
// DMA stream, and/or DMA channel. | |||||
// Bonsai C4 wires up pin A9 for Vbus sensing pin by default. For spilt keyboards, this | |||||
// can be used to determine which half of the keyboard is plugged into USB. | |||||
// For boards using Bonsai C4 merely as a reference design, the VBUS sense pin A9 | |||||
// can be used for purposes other than Vbus sensing (e.g. the switch | |||||
// matrix). | |||||
// | |||||
// If A9 is needed for Vbus sensing, uncomment the line | |||||
// below. Most keyboards using Bonsai C4 can leave the line below | |||||
// commented out. | |||||
// | |||||
// #undef BOARD_OTG_NOVBUSSENS | |||||
// FRAM configuration | |||||
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0 | |||||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz | |||||
#define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip | |||||
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 | |||||
// External flash configuration | |||||
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12 | |||||
#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 1 // 96MHz; max supported by W25Q128JV is 133MHz | |||||
#define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte | |||||
#define EXTERNAL_FLASH_PAGE_SIZE 256 | |||||
#define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase | |||||
// SPI Configuration (needed for FRAM and FLASH) | |||||
#define SPI_DRIVER SPID1 | |||||
#define SPI_SCK_PIN B3 | |||||
#define SPI_MOSI_PIN B5 | |||||
#define SPI_MISO_PIN B4 | |||||
// Example code to set up PWM backlight on pin A6 | |||||
// If a different pin is used, a different PWM driver/channel settings may be necessary | |||||
#define BACKLIGHT_PIN A6 | |||||
#define BACKLIGHT_PWM_DRIVER PWMD3 | |||||
#define BACKLIGHT_PWM_CHANNEL 1 | |||||
// Example code for WS2812 underglow | |||||
// Only pin A10 is wired to send 5V signals to the WS2812 | |||||
// This also usually requires adding special wiring during board assembly | |||||
#define RGB_DI_PIN A10 | |||||
#define WS2812_PWM_DRIVER PWMD1 | |||||
#define WS2812_PWM_CHANNEL 3 | |||||
#define WS2812_PWM_PAL_MODE 1 | |||||
#define WS2812_DMA_STREAM STM32_DMA2_STREAM5 | |||||
#define WS2812_DMA_CHANNEL 6 |
@ -1,35 +0,0 @@ | |||||
/* Copyright 2021 customMK | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
// If you are using I2C (e.g. for OLED), include this line | |||||
#define HAL_USE_I2C TRUE | |||||
// If you are using PWM (e.g. for WS2812, backlight, etc.) include this line | |||||
#define HAL_USE_PWM TRUE | |||||
// If you are using serial comms for split communications, include these lines | |||||
#define HAL_USE_SERIAL TRUE | |||||
#define SERIAL_BUFFERS_SIZE 256 | |||||
// If you are using SPI (e.g. for FRAM, flash, etc.) include these lines | |||||
#define HAL_USE_SPI TRUE | |||||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||||
// This enables interrupt-driven mode | |||||
#define SPI_USE_WAIT TRUE | |||||
#include_next <halconf.h> |
@ -1,35 +0,0 @@ | |||||
/* Copyright 2022 customMK | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include_next <mcuconf.h> | |||||
// Used for underglow in example code | |||||
#undef STM32_PWM_USE_TIM1 //timer 1 channel 3 | |||||
#define STM32_PWM_USE_TIM1 TRUE | |||||
// Used for backlight in examples | |||||
#undef STM32_PWM_USE_TIM3 //timer 3 channel 1 | |||||
#define STM32_PWM_USE_TIM3 TRUE | |||||
// Used for FRAM and flash in example code | |||||
#undef STM32_SPI_USE_SPI1 | |||||
#define STM32_SPI_USE_SPI1 TRUE | |||||
// Used for Split comms in example code | |||||
#undef STM32_SERIAL_USE_USART1 | |||||
#define STM32_SERIAL_USE_USART1 TRUE |
@ -1,10 +0,0 @@ | |||||
# Bonsai C4 template code | |||||
Currently, the converter for Pro Micro to Bonsai C4 only does pin mapping. This is sufficient for simple keyboards and also a good start for | |||||
incorporating into more advanced keyboards with other features (like RGB, OLED, backlighting, split communiciations, etc.). However, to make | |||||
use of the more advanced features--including using the FRAM and flash memory chip included on Bonsai C4--various peripheral hardware must | |||||
be configured. Pro Micro does not requrie such configuration because such functionality is more limited and hard-wired to specific pins. | |||||
The code here provides examples that can be used to operate SPI, I2C, PWM, and Serial comms. In addition to using the converter, you will | |||||
need to take code (as-needed) and add it to existing config.h files, or add in new halconf.h and mcuconf.h files. If you are changing which | |||||
pins are used for certain functions, you should verify the new pins support that functionality, and check all assingments to ensure the correct settings are used (including as-applicable driver, channel, PAL (Pin ALternate function) mode, DMA stream, and/or DMA channel). |
@ -0,0 +1,9 @@ | |||||
# List of all the board related files. | |||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c | |||||
# Required include directories | |||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE | |||||
# Shared variables | |||||
ALLCSRC += $(BOARDSRC) | |||||
ALLINC += $(BOARDINC) |
@ -0,0 +1,20 @@ | |||||
/* Copyright 2020 Nick Brassel (tzarc) | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 3 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <https://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include_next "board.h" | |||||
#undef STM32_HSE_BYPASS |
@ -0,0 +1,92 @@ | |||||
/* Copyright 2022 David Hoelscher, customMK | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 3 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <https://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
// Bonsai C4 includes Vbus sensing; derived designs that use PA9 for other purposes | |||||
// may disable Vbus sensing with #define BOARD_OTG_NOVBUSSENS 1 | |||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP | |||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE | |||||
#endif | |||||
// FRAM configuration | |||||
#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN | |||||
# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0) | |||||
# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz | |||||
# define EXTERNAL_EEPROM_BYTE_COUNT 8192 | |||||
# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip | |||||
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 | |||||
#endif | |||||
// External flash configuration | |||||
#ifndef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN | |||||
# define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOB, 12) | |||||
# define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 2 // 48MHz; max supported by W25Q128JV is 133MHz | |||||
# define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte | |||||
# define EXTERNAL_FLASH_PAGE_SIZE 256 | |||||
# define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase | |||||
#endif | |||||
// SPI Configuration (needed for FRAM and FLASH) | |||||
#ifndef SPI_DRIVER | |||||
# define SPI_DRIVER SPID1 | |||||
#endif | |||||
#ifndef SPI_SCK_PIN | |||||
# define SPI_SCK_PIN PAL_LINE(GPIOB, 3) | |||||
#endif | |||||
#ifndef SPI_MOSI_PIN | |||||
# define SPI_MOSI_PIN PAL_LINE(GPIOB, 5) | |||||
#endif | |||||
#ifndef SPI_MISO_PIN | |||||
# define SPI_MISO_PIN PAL_LINE(GPIOB, 4) | |||||
#endif | |||||
// I2C Configuration | |||||
#ifdef CONVERT_TO_BONSAI_C4 | |||||
# ifndef I2C1_SCL_PIN | |||||
# define I2C1_SCL_PIN PAL_LINE(GPIOB, 6) | |||||
# endif | |||||
# ifndef I2C1_SDA_PIN | |||||
# define I2C1_SDA_PIN PAL_LINE(GPIOB, 9) | |||||
# endif | |||||
#endif | |||||
// WS2812-style LED control on pin A10 | |||||
#ifdef WS2812_DRIVER_PWM | |||||
# ifndef RGB_DI_PIN | |||||
# define RGB_DI_PIN PAL_LINE(GPIOA, 10) | |||||
# endif | |||||
# ifndef WS2812_PWM_DRIVER | |||||
# define WS2812_PWM_DRIVER PWMD1 | |||||
# endif | |||||
# ifndef WS2812_PWM_CHANNEL | |||||
# define WS2812_PWM_CHANNEL 3 | |||||
# endif | |||||
# ifndef WS2812_PWM_PAL_MODE | |||||
# define WS2812_PWM_PAL_MODE 1 | |||||
# endif | |||||
# ifndef WS2812_DMA_STREAM | |||||
# define WS2812_DMA_STREAM STM32_DMA2_STREAM5 | |||||
# endif | |||||
# ifndef WS2812_DMA_CHANNEL | |||||
# define WS2812_DMA_CHANNEL 6 | |||||
# endif | |||||
#endif | |||||
#ifndef USB_VBUS_PIN | |||||
# define USB_VBUS_PIN PAL_LINE(GPIOA, 9) | |||||
#endif |
@ -0,0 +1,49 @@ | |||||
/* Copyright 2022 David Hoelscher, customMK | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 3 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <https://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#ifndef HAL_USE_SPI | |||||
# define HAL_USE_SPI TRUE | |||||
#endif | |||||
#ifndef HAL_USE_I2C | |||||
# define HAL_USE_I2C TRUE | |||||
#endif | |||||
#ifdef SPLIT_KEYBOARD | |||||
# ifndef HAL_USE_SERIAL | |||||
# define HAL_USE_SERIAL TRUE | |||||
# endif | |||||
# ifndef SERIAL_BUFFERS_SIZE | |||||
# define SERIAL_BUFFERS_SIZE 256 | |||||
# endif | |||||
#endif | |||||
#ifdef WS2812_DRIVER_PWM | |||||
# ifndef HAL_USE_PWM | |||||
# define HAL_USE_PWM TRUE | |||||
# endif | |||||
#endif | |||||
#ifndef SPI_SELECT_MODE | |||||
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||||
#endif | |||||
#ifndef SPI_USE_WAIT | |||||
# define SPI_USE_WAIT TRUE | |||||
#endif | |||||
#include_next <halconf.h> |
@ -0,0 +1,249 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
#ifndef MCUCONF_H | |||||
#define MCUCONF_H | |||||
/* | |||||
* STM32F4xx drivers configuration. | |||||
* The following settings override the default settings present in | |||||
* the various device driver implementation headers. | |||||
* Note that the settings for each driver only have effect if the whole | |||||
* driver is enabled in halconf.h. | |||||
* | |||||
* IRQ priorities: | |||||
* 15...0 Lowest...Highest. | |||||
* | |||||
* DMA priorities: | |||||
* 0...3 Lowest...Highest. | |||||
*/ | |||||
#define STM32F4xx_MCUCONF | |||||
#define STM32F411_MCUCONF | |||||
/* | |||||
* HAL driver system settings. | |||||
*/ | |||||
#define STM32_NO_INIT FALSE | |||||
#define STM32_PVD_ENABLE FALSE | |||||
#define STM32_PLS STM32_PLS_LEV0 | |||||
#define STM32_BKPRAM_ENABLE FALSE | |||||
#define STM32_HSI_ENABLED TRUE | |||||
#define STM32_LSI_ENABLED TRUE | |||||
#define STM32_HSE_ENABLED TRUE | |||||
#define STM32_LSE_ENABLED FALSE | |||||
#define STM32_CLOCK48_REQUIRED TRUE | |||||
#define STM32_SW STM32_SW_PLL | |||||
#define STM32_PLLSRC STM32_PLLSRC_HSE | |||||
#define STM32_PLLM_VALUE 4 | |||||
#define STM32_PLLN_VALUE 96 | |||||
#define STM32_PLLP_VALUE 2 | |||||
#define STM32_PLLQ_VALUE 4 | |||||
#define STM32_HPRE STM32_HPRE_DIV1 | |||||
#define STM32_PPRE1 STM32_PPRE1_DIV2 | |||||
#define STM32_PPRE2 STM32_PPRE2_DIV1 | |||||
#define STM32_RTCSEL STM32_RTCSEL_LSI | |||||
#define STM32_RTCPRE_VALUE 8 | |||||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI | |||||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 | |||||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK | |||||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 | |||||
#define STM32_I2SSRC STM32_I2SSRC_CKIN | |||||
#define STM32_PLLI2SN_VALUE 192 | |||||
#define STM32_PLLI2SR_VALUE 5 | |||||
/* | |||||
* IRQ system settings. | |||||
*/ | |||||
#define STM32_IRQ_EXTI0_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI1_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI2_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI3_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI4_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI16_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI17_PRIORITY 15 | |||||
#define STM32_IRQ_EXTI18_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI19_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI20_PRIORITY 6 | |||||
#define STM32_IRQ_EXTI21_PRIORITY 15 | |||||
#define STM32_IRQ_EXTI22_PRIORITY 15 | |||||
#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 | |||||
#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 | |||||
#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 | |||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7 | |||||
#define STM32_IRQ_TIM2_PRIORITY 7 | |||||
#define STM32_IRQ_TIM3_PRIORITY 7 | |||||
#define STM32_IRQ_TIM4_PRIORITY 7 | |||||
#define STM32_IRQ_TIM5_PRIORITY 7 | |||||
#define STM32_IRQ_USART1_PRIORITY 12 | |||||
#define STM32_IRQ_USART2_PRIORITY 12 | |||||
#define STM32_IRQ_USART6_PRIORITY 12 | |||||
/* | |||||
* ADC driver system settings. | |||||
*/ | |||||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 | |||||
#define STM32_ADC_USE_ADC1 FALSE | |||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) | |||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||||
#define STM32_ADC_IRQ_PRIORITY 6 | |||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 | |||||
/* | |||||
* GPT driver system settings. | |||||
*/ | |||||
#define STM32_GPT_USE_TIM1 FALSE | |||||
#define STM32_GPT_USE_TIM2 FALSE | |||||
#define STM32_GPT_USE_TIM3 FALSE | |||||
#define STM32_GPT_USE_TIM4 FALSE | |||||
#define STM32_GPT_USE_TIM5 FALSE | |||||
#define STM32_GPT_USE_TIM9 FALSE | |||||
#define STM32_GPT_USE_TIM10 FALSE | |||||
#define STM32_GPT_USE_TIM11 FALSE | |||||
/* | |||||
* I2C driver system settings. | |||||
*/ | |||||
#define STM32_I2C_USE_I2C1 TRUE | |||||
#define STM32_I2C_USE_I2C2 FALSE | |||||
#define STM32_I2C_USE_I2C3 FALSE | |||||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | |||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | |||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 | |||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 | |||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5 | |||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 | |||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 | |||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3 | |||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||||
/* | |||||
* I2S driver system settings. | |||||
*/ | |||||
#define STM32_I2S_USE_SPI2 FALSE | |||||
#define STM32_I2S_USE_SPI3 FALSE | |||||
#define STM32_I2S_SPI2_IRQ_PRIORITY 10 | |||||
#define STM32_I2S_SPI3_IRQ_PRIORITY 10 | |||||
#define STM32_I2S_SPI2_DMA_PRIORITY 1 | |||||
#define STM32_I2S_SPI3_DMA_PRIORITY 1 | |||||
#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||||
#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||||
#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||||
#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||||
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") | |||||
/* | |||||
* ICU driver system settings. | |||||
*/ | |||||
#define STM32_ICU_USE_TIM1 FALSE | |||||
#define STM32_ICU_USE_TIM2 FALSE | |||||
#define STM32_ICU_USE_TIM3 FALSE | |||||
#define STM32_ICU_USE_TIM4 FALSE | |||||
#define STM32_ICU_USE_TIM5 FALSE | |||||
#define STM32_ICU_USE_TIM9 FALSE | |||||
#define STM32_ICU_USE_TIM10 FALSE | |||||
#define STM32_ICU_USE_TIM11 FALSE | |||||
/* | |||||
* PWM driver system settings. | |||||
*/ | |||||
#define STM32_PWM_USE_TIM1 TRUE | |||||
#define STM32_PWM_USE_TIM2 FALSE | |||||
#define STM32_PWM_USE_TIM3 TRUE | |||||
#define STM32_PWM_USE_TIM4 FALSE | |||||
#define STM32_PWM_USE_TIM5 FALSE | |||||
#define STM32_PWM_USE_TIM9 FALSE | |||||
#define STM32_PWM_USE_TIM10 FALSE | |||||
#define STM32_PWM_USE_TIM11 FALSE | |||||
/* | |||||
* RTC driver system settings. | |||||
*/ | |||||
#define STM32_RTC_PRESA_VALUE 32 | |||||
#define STM32_RTC_PRESS_VALUE 1024 | |||||
#define STM32_RTC_CR_INIT 0 | |||||
#define STM32_RTC_TAMPCR_INIT 0 | |||||
/* | |||||
* SERIAL driver system settings. | |||||
*/ | |||||
#define STM32_SERIAL_USE_USART1 TRUE | |||||
#define STM32_SERIAL_USE_USART2 FALSE | |||||
#define STM32_SERIAL_USE_USART6 FALSE | |||||
/* | |||||
* SPI driver system settings. | |||||
*/ | |||||
#define STM32_SPI_USE_SPI1 TRUE | |||||
#define STM32_SPI_USE_SPI2 FALSE | |||||
#define STM32_SPI_USE_SPI3 FALSE | |||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) | |||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) | |||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||||
/* | |||||
* ST driver system settings. | |||||
*/ | |||||
#define STM32_ST_IRQ_PRIORITY 8 | |||||
#define STM32_ST_USE_TIMER 2 | |||||
/* | |||||
* UART driver system settings. | |||||
*/ | |||||
#define STM32_UART_USE_USART1 FALSE | |||||
#define STM32_UART_USE_USART2 FALSE | |||||
#define STM32_UART_USE_USART6 FALSE | |||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) | |||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) | |||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) | |||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) | |||||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) | |||||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||||
#define STM32_UART_USART6_DMA_PRIORITY 0 | |||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||||
/* | |||||
* USB driver system settings. | |||||
*/ | |||||
#define STM32_USB_USE_OTG1 TRUE | |||||
#define STM32_USB_OTG1_IRQ_PRIORITY 14 | |||||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512 | |||||
#define STM32_USB_HOST_WAKEUP_DURATION 2 | |||||
/* | |||||
* WDG driver system settings. | |||||
*/ | |||||
#define STM32_WDG_USE_IWDG FALSE | |||||
#endif /* MCUCONF_H */ |
@ -1,4 +1,4 @@ | |||||
# Proton C MCU settings for converting AVR projects | # Proton C MCU settings for converting AVR projects | ||||
MCU := STM32F411 | MCU := STM32F411 | ||||
BOARD := GENERIC_STM32_F411XE | |||||
BOOTLOADER := stm32-dfu | |||||
BOARD := BONSAI_C4 | |||||
BOOTLOADER := stm32-dfu |
@ -0,0 +1,5 @@ | |||||
BACKLIGHT_DRIVER ?= pwm | |||||
WS2812_DRIVER ?= pwm | |||||
SERIAL_DRIVER ?= usart | |||||
FLASH_DRIVER ?= spi | |||||
EEPROM_DRIVER ?= spi |