* Add Puck * Update Manufacturer name in metadata * Add num lock to high layer * update pins * update pin settings * fix numlock key * Cleanup config.h * Update device info * updates after reviewpull/4501/head
@ -0,0 +1,31 @@ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER OkKeebs LLC | |||
#define PRODUCT Puck | |||
#define DESCRIPTION 4x3 macropad | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 3 | |||
#define MATRIX_ROW_PINS { D2, D3, C6, C7 } | |||
#define MATRIX_COL_PINS { B4, D7, D6 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 3 | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE |
@ -0,0 +1,64 @@ | |||
#include QMK_KEYBOARD_H | |||
#define _BL 0 | |||
#define _HL 1 | |||
#define _LL 2 | |||
enum keycodes { | |||
LOW, | |||
HIGH | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* | |||
* Base Layer (Numbers) | |||
*/ | |||
[_BL] = LAYOUT( | |||
KC_KP_7, KC_KP_8, KC_KP_9, | |||
KC_KP_4, KC_KP_5, KC_KP_6, | |||
KC_KP_1, KC_KP_2, KC_KP_3, | |||
LOW, KC_KP_0, HIGH | |||
), | |||
/* | |||
* High Layer (Work) | |||
*/ | |||
[_HL] = LAYOUT( | |||
KC_NUMLOCK, KC_PAST, KC_NO, | |||
KC_PMNS, KC_PENT, KC_PPLS, | |||
KC_NO, KC_PSLS, KC_NO, | |||
KC_NO, KC_PDOT, KC_NO | |||
), | |||
/* | |||
* Low Layer (Media) | |||
*/ | |||
[_LL] = LAYOUT( | |||
KC_NO, KC_VOLU, KC_NO, | |||
KC_MPRV, KC_MPLY, KC_MNXT, | |||
KC_NO, KC_VOLD, KC_NO, | |||
KC_NO, KC_NO, KC_NO | |||
), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch(keycode) { | |||
case HIGH: | |||
if (record->event.pressed) { | |||
layer_on(_HL); | |||
}else{ | |||
layer_off(_HL); | |||
layer_off(_LL); | |||
} | |||
return false; | |||
break; | |||
case LOW: | |||
if (record->event.pressed) { | |||
layer_on(_LL); | |||
}else{ | |||
layer_off(_LL); | |||
layer_off(_HL); | |||
} | |||
return false; | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
#include "puck.h" |
@ -0,0 +1,15 @@ | |||
#ifndef PUCK_H | |||
#define PUCK_H | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B \ | |||
) { \ | |||
{ K00, K01, K02 }, \ | |||
{ K03, K04, K05 }, \ | |||
{ K06, K07, K08 }, \ | |||
{ K09, K0A, K0B }, \ | |||
} | |||
#endif |
@ -0,0 +1,11 @@ | |||
A 4 x 3 macropad. | |||
Keyboard Maintainer: [john-pettigrew](https://github.com/john-pettigrew) | |||
Hardware Supported: Puck PCB. | |||
Hardware Availability: [OkKeebs.com](https://okkeebs.com/products/puck-pcb) | |||
Make example for this keyboard (after setting up your build environment): | |||
make puck:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,68 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
BOOTLOADER = halfkay | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend |