@ -0,0 +1,147 @@ | |||||
/* | |||||
Copyright 2021 Mechlovin' | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x4D4C | |||||
#define PRODUCT_ID 0x0600 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Mechlovin Studio | |||||
#define PRODUCT Jay60 | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 14 | |||||
/* | |||||
* Keyboard Matrix Assignments | |||||
* | |||||
* Change this to how you wired your keyboard | |||||
* COLS: AVR pins used for columns, left to right | |||||
* ROWS: AVR pins used for rows, top to bottom | |||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||||
* | |||||
*/ | |||||
#define MATRIX_ROW_PINS { C2, C1, C0, D7, A1 } | |||||
#define MATRIX_COL_PINS { B6, B5, B3, B2, B1, B0, A0, A6, A7, C7, C6, C5, C4, C3 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW, ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
//#define LED_NUM_LOCK_PIN B0 | |||||
#define LED_CAPS_LOCK_PIN D4 | |||||
//#define LED_SCROLL_LOCK_PIN B2 | |||||
//#define LED_COMPOSE_PIN B3 | |||||
//#define LED_KANA_PIN B4 | |||||
//#define BACKLIGHT_PIN B7 | |||||
//#define BACKLIGHT_LEVELS 3 | |||||
//#define BACKLIGHT_BREATHING | |||||
//#define RGB_DI_PIN E2 | |||||
//#ifdef RGB_DI_PIN | |||||
//# define RGBLED_NUM 16 | |||||
//# define RGBLIGHT_HUE_STEP 8 | |||||
//# define RGBLIGHT_SAT_STEP 8 | |||||
//# define RGBLIGHT_VAL_STEP 8 | |||||
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||||
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||||
/*== all animations enable ==*/ | |||||
//# define RGBLIGHT_ANIMATIONS | |||||
/*== or choose animations ==*/ | |||||
//# define RGBLIGHT_EFFECT_BREATHING | |||||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||||
//# define RGBLIGHT_EFFECT_SNAKE | |||||
//# define RGBLIGHT_EFFECT_KNIGHT | |||||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||||
/*== customize breathing effect ==*/ | |||||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||||
/*==== use exp() and sin() ====*/ | |||||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||||
//#endif | |||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||||
#define DEBOUNCE 5 | |||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||||
*/ | |||||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||||
/* | |||||
* Force NKRO | |||||
* | |||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||||
* makefile for this to work.) | |||||
* | |||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||||
* until the next keyboard reset. | |||||
* | |||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||||
* fully operational during normal computer usage. | |||||
* | |||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||||
* power-up. | |||||
* | |||||
*/ | |||||
//#define FORCE_NKRO | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
/* disable these deprecated features by default */ | |||||
#define NO_ACTION_MACRO | |||||
#define NO_ACTION_FUNCTION | |||||
/* Bootmagic Lite key configuration */ | |||||
//#define BOOTMAGIC_LITE_ROW 0 | |||||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,78 @@ | |||||
{ | |||||
"keyboard_name": "Jay60", | |||||
"url": "", | |||||
"maintainer": "Mechlovin' Studio", | |||||
"layouts": { | |||||
"LAYOUT_all": { | |||||
"layout": [ | |||||
{"x": 0, "y": 0}, | |||||
{"x": 1, "y": 0}, | |||||
{"x": 2, "y": 0}, | |||||
{"x": 3, "y": 0}, | |||||
{"x": 4, "y": 0}, | |||||
{"x": 5, "y": 0}, | |||||
{"x": 6, "y": 0}, | |||||
{"x": 7, "y": 0}, | |||||
{"x": 8, "y": 0}, | |||||
{"x": 9, "y": 0}, | |||||
{"x": 10, "y": 0}, | |||||
{"x": 11, "y": 0}, | |||||
{"x": 12, "y": 0}, | |||||
{"x": 13, "y": 0}, | |||||
{"x": 14, "y": 0}, | |||||
{"x": 0, "y": 1, "w": 1.5}, | |||||
{"x": 1.5, "y": 1}, | |||||
{"x": 2.5, "y": 1}, | |||||
{"x": 3.5, "y": 1}, | |||||
{"x": 4.5, "y": 1}, | |||||
{"x": 5.5, "y": 1}, | |||||
{"x": 6.5, "y": 1}, | |||||
{"x": 7.5, "y": 1}, | |||||
{"x": 8.5, "y": 1}, | |||||
{"x": 9.5, "y": 1}, | |||||
{"x": 10.5, "y": 1}, | |||||
{"x": 11.5, "y": 1}, | |||||
{"x": 12.5, "y": 1}, | |||||
{"x": 13.5, "y": 1, "w": 1.5}, | |||||
{"x": 0, "y": 2, "w": 1.75}, | |||||
{"x": 1.75, "y": 2}, | |||||
{"x": 2.75, "y": 2}, | |||||
{"x": 3.75, "y": 2}, | |||||
{"x": 4.75, "y": 2}, | |||||
{"x": 5.75, "y": 2}, | |||||
{"x": 6.75, "y": 2}, | |||||
{"x": 7.75, "y": 2}, | |||||
{"x": 8.75, "y": 2}, | |||||
{"x": 9.75, "y": 2}, | |||||
{"x": 10.75, "y": 2}, | |||||
{"x": 11.75, "y": 2}, | |||||
{"x": 12.75, "y": 2, "w": 2.25}, | |||||
{"x": 0, "y": 3, "w": 2.25}, | |||||
{"x": 2.25, "y": 3}, | |||||
{"x": 3.25, "y": 3}, | |||||
{"x": 4.25, "y": 3}, | |||||
{"x": 5.25, "y": 3}, | |||||
{"x": 6.25, "y": 3}, | |||||
{"x": 7.25, "y": 3}, | |||||
{"x": 8.25, "y": 3}, | |||||
{"x": 9.25, "y": 3}, | |||||
{"x": 10.25, "y": 3}, | |||||
{"x": 11.25, "y": 3}, | |||||
{"x": 12.25, "y": 3, "w": 1.75}, | |||||
{"x": 14, "y": 3}, | |||||
{"x": 0, "y": 4, "w": 1.25}, | |||||
{"x": 1.25, "y": 4, "w": 1.25}, | |||||
{"x": 2.5, "y": 4, "w": 1.25}, | |||||
{"x": 3.75, "y": 4, "w": 6.25}, | |||||
{"x": 10, "y": 4, "w": 1.25}, | |||||
{"x": 11.25, "y": 4, "w": 1.25}, | |||||
{"x": 12.5, "y": 4, "w": 1.25}, | |||||
{"x": 13.75, "y": 4, "w": 1.25} | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,17 @@ | |||||
/* Copyright 2021 Mechlovin' | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "jay60.h" |
@ -0,0 +1,41 @@ | |||||
/* Copyright 2021 Mechlovin' | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
/* This is a shortcut to help you visually see your layout. | |||||
* | |||||
* The first section contains all of the arguments representing the physical | |||||
* layout of the board and position of the keys. | |||||
* | |||||
* The second converts the arguments into a two-dimensional array which | |||||
* represents the switch matrix. | |||||
*/ | |||||
#define LAYOUT_all( \ | |||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, \ | |||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ | |||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ | |||||
K40, K41, K42, K46, K4A, K4B, K4C, K4D \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ | |||||
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ | |||||
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \ | |||||
} |
@ -0,0 +1,36 @@ | |||||
/* Copyright 2021 Mechlovin' Studio | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
#define LT1_CAP LT(1, KC_CAPS) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, TO(1), | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL | |||||
), | |||||
[1] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
# The default keymap for common60 |
@ -0,0 +1,50 @@ | |||||
/* Copyright 2020 Mechlovin' | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
#define LT1_CAP LT(1, KC_CAPS) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, TO(1), | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL | |||||
), | |||||
[1] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
[2] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
[3] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
VIA_ENABLE = yes |
@ -0,0 +1,26 @@ | |||||
# jay60 | |||||
![jay60](https://i.imgur.com/FVg59LUl.png) | |||||
Jay60 PCB, Unikorn PCB compatible | |||||
* Keyboard Maintainer: [Mechlovin'](https://mechlovin.studio) | |||||
* Hardware Supported: Jay60, Atmega32A | |||||
* Hardware Availability: [Mechlovin'](https://mechlovin.studio) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make mechlovin/jay60:default | |||||
Flashing example for this keyboard: | |||||
make mechlovin/jay60:default:flash | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||||
## Bootloader | |||||
Enter the bootloader in 3 ways: | |||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | |||||
* **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard | |||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available |
@ -0,0 +1,24 @@ | |||||
# MCU name | |||||
MCU = atmega32a | |||||
# Processor frequency | |||||
F_CPU = 16000000 | |||||
# Bootloader selection | |||||
BOOTLOADER = usbasploader | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = no # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
AUDIO_ENABLE = no # Audio output |