* Add customizable tapping terms

* Add Documentation

* Fix function

* Fixes

* It's not a pointer

* Add debugging output

* Update documentation to be at least vaguely accurate

* Use `get_tapping_term(tapping_key.event)` instead

`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.

However `tapping_key.event` actually gives the correct column and row information.  It appears be the correct structure to use. 

In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h

* Use variable tapping term value rather than define

* Silly drashna - tapping_key.event, not event

* add get_event_keycode() function

* Fix typo

Co-Authored-By: drashna <drashna@live.com>

* Remove post_process_record_quantum since it's the wrong PR

* Update quantum/quantum.c

Co-Authored-By: drashna <drashna@live.com>

* Better handle ifdef statement for permissive hold

Since we can't be sure that tapping term is actually 500

* Update quantum.c comments based on feedback

* Clean up get_tapping_term function

Clean up function so that users don't need to call the event function, and instead only check the keycode

* Add ability to run functionality on and off

* Make ifdef's more compact

* Implemented Eager Per Row debouncing algorithm.

Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical)

* Added documentation for eager_pr

* Ported ergodox_ez to eager_pr debouncing.

* Removed check for changes in matrix_scan.

* Added further clarification in docs.

* Accidental merge with ergodox_ez

* Small cleanup in eager_pr

* Forgot to debounce_init - this would probably cause seg-faults.

* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance

* Updating effect function api for future extensions

* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary

* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain

* Fixed typo of 'confid.h' to 'config.h'

* Fixed broken links in docs

* Fixed a lot of dead links

* Removed all dead links that I could not find a replacement for

* Placed knops links back in

* Fixed plank keymaps so that they will compile for planck light

* Https doesn't work on knops.io

* tv44:budi now compiles

* s60_x:amnesia0287 now compiles

* Fixed allocation of key_combos so that narze keymap for planck can compile correctly

* Disabled rgb on ergodone and infinity

* Enabled tap dance so it compiles

* Added return statement so it compiles

* If compiling on light disable extra functionality

* Properly redefined variable so it compiles

* Remove remaining dead links

* Add udev rule for Input Club bootloaders

* match style with file name above udev rule

This allows for constant, non-accelerated mouse movement, while retaining the original functionality. Configurable by a define.

* Add support for wiring RGB LEDs for both halves directly to their respective controllers

RGB LEDs for each half don't need to be chained together across the TRRS cable with this

* Add split RGB LED support for serial

* Update config/rules for bakingpy layout

* Un-nest ifdefs for hand detection

* Read RGB config state from memory instead of EEPROM for serial updates

* Reuse existing LED pointer instead of creating new one

* update isp flashing page

* update isp flashing page

* rgblight.c: add RGBLIGHT_LED_MAP support

* add code to keyboards/helix/rev2/keymaps/five_rows/config.h to test rgblight.c:RGBLIGHT_LED_MAP

* Test end. Revert "add code to keyboards/helix/rev2/keymaps/five_rows/config.h to test rgblight.c:RGBLIGHT_LED_MAP"

This reverts commit e7488d6f73.

* update docs/feature_rgblight.md

* led_map[] move to PROGMEM

* Recursively clone qmk_firmware repo

Specifically, so that it grabs the submodules, since ARM keyboards are becoming more common, and we are seeing more issues about chibiOS not being downloaded (in the error log, rather than by question)

* Wrap in shell

* Fix up Common functions doc

* Add to extra commands to flashing doc

* Rearrange and touch up Macros

* Expand Newbs Flashing guide

* Update process_record documentation

* Add git to best practices name in sidebar

* Expand FAQ for build/flashing

* Add deprecated info to functions

* Update docs/feature_macros.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/feature_macros.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/flashing.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/flashing.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/keymap.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/newbs_flashing.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/newbs_flashing.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/faq_build.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/feature_macros.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/keymap.md

Co-Authored-By: drashna <drashna@live.com>

* Fix up Common functions doc

* Make pre-init example accurate

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Zadig Driver catchall

* Spelling Depriciated

* Completely remove fn_actions section

* [Docs] Add music_map to audio documentation

* Add link to planck as example

* Adds new RGB Matrix effect: rgb_matrix_config'd reactive LEDs

* [Docs] Adds disable for new effect

* [Docs] Added new effect to list of effects

* Add VSCode guide to docs

* Fix settings menu enumeration

* Update docs/other_vscode.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/other_vscode.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/other_vscode.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/other_vscode.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/other_vscode.md

Co-Authored-By: drashna <drashna@live.com>

* Add EEPROM avrdude flashing commands for setting handedness

* Update docs with info on flashing EEPROM handedness files with commands

* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment

See https://www.archlinux.org/packages/extra/x86_64/dfu-programmer/

This includes a much more feature rich version of the code, as well as updating for changes that have occurred in QMK Firmware

* add a tapdance example for creating advanced mod-tap and layer-tap keys

* add optional curly braces to match QMK conventions

* change example to use `register_code16()` and tapdance keycodes more closely matching QMK variants

I'm a web designer and know there are several "decent" code editors out there, but I would figure not everyone into keyboards is, so I found Sublime text a bit of a hard sell for someone who just need to manipulate some text files. VS Code or Atom would b a much better suit for them instead of dropping $80 on a "decent" text editor.

`void uint32_t` is not a return type.

* Add note about using Unicode Hex Input

* Update docs

* remove extra return, oops

* Ask for your name when generating a new keyboard

* Update docs

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>

Many instances in the QMK Docs referenced KEYMAP macros, which is outdated terminology.

Replaced most instances of KEYMAP with LAYOUT, to reflect the desired usage.

Fixed references to a "built" (sic) command, and an incorrect word.

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Experimental LED support (untested)

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Added documentation

* Renamed feature to velocikey

* Reverted readme to original state

* Correct the readme title

* Updated feature name in the docs

* Update EECONFIG name

* Add compile-time toggles for velocikey

* Update feature documentation

* Revert "Merge branch 'led-support' into master"

This reverts commit e123ff5feb, reversing
changes made to df111a55b9.

* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE

* Rename decay_task function to decelerate

* Apply suggestions from code review

Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>

* Re-order eeconfig definitions

* Apply coding conventions

* Apply #ifdef check in lufa.c

* Refactored interval time checks into one functionc

* Small rename

* Fix unused function error for layouts not using all rgb effects

* Only update EEPROM if Velocikey is enabled

* Incorporate code review feedback

* Small adjustment to top-end decay rate

* Add Velocikey documentation to table of contents

* Bring tetris:default keymap size down by disabling audio

* renamed KEYMAP to LAYOUT in hand wiring docs

* added two additional guides for hand wiring

Descriptions for B5_AUDIO, B6_AUDIO, and B7_AUDIO under Hardware Options were partially italicized when parsed by Docsify, though rendered as intended by GitHub.

* Fix #3797 firmware not compiling

If DRIVER_COUNT 1 firmware will not compile.

* Fix typo

* [Docs] Add section about EEPROM on ARM

* Add Preonic firmware

* Update docs/faq_build.md

add hyperlink

Co-Authored-By: yanfali <yanfali@gmail.com>

* Remove CUSTOM_MATRIX refs from DIODE_DIRECTION

* Remove '#define DIODE_DIRECTION CUSTOM_MATRIX'

* Remove CUSTOM_MATRIX refs from DIODE_DIRECTION documentation

* Change Command keycode defaults to match corresponding Bootmagic codes

* Make alternate magic key keycodes consistent

* Reflect changes from previous commit in tmk_core/common/command.c

* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes

* Swap E and BSPACE for MAGIC_KEY_EEPROM

* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT

* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff

* Update Command descriptions

* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards

* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom

* haptic enhancement - eeprom and modes added

* Added set and get functions for haptic feedback

* initial implementation of solenoids under haptic feedback

* changed eeprom to 32 bits to reserve blocks for future features

* start documentation of haptic feedback

* change keycode per comment from reviewers

* typo fixes

* added eeprom for solenoid configs

* added solenoid and docs

* Add/fix default parameters configs, improve docs

* more doc cleanup

* add in solenoid buzz toggle, clean up doc

* some fixes for error in compiling solenoid

* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c

* fixes for avr side issues

* update keymap

* fix keymap compile error

* fix bugs found during solenoid testing

* set pin that is not powered during bootloader

* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader

Based on conversation with Drashna on Discord, we know that if ONE_SHOT_TAP_TOGGLE is 5, then tapping a one shot mod key 5 times holds the one shot key permanently, but to come out of this, you need to press the same key only once.

* Add support for using ranges for RGB

This patch adds support for controlling continuous ranges of RGB LEDs.
Helper functions for split boards are also available.

* RGB Range: Use hardware-platform agnostic wait

* Update KC_GESC documentation

 - document caveats on OSX and expected behavior with KC_GESC and GUI
 - clarify documentation slightly
 - give examples of expected output in actual use

* Update OSX -> macOS

* Captilization

* remove simply

* docker_build.sh: Run container in interactive mode

* Add message about QMK Toolbox

* Update Docker docs

* Add suspend functions

* Disable RGB code if it's disabled

* Add keyboard_init functions

* Change where references so it will compile

* Wrong command chained in wake up kb function

* Fix non-feature file changes

* Add documentation

* Re-add matrix init docs

* add rgblight code to example

* Remove suspend code

* Clean up docs

* Fix docs

* Fix suspend code

* more doc fixes

* change function to startup_* rather than keyboard_init_

* fix spelling error

* fix up docs to finish removing keyboard_init

* Use Pre and Post init functions

* Update Documenation

* Remove changes to my keymap and userspace code

* Cleanup

* Revert changes to extra files

* Forgot a semicolon

* Make sure all protocols call keyboard_setup

* Cleanup functions

* Unset startup_user

* Remove changes from division keyboard

* Readd startup_user function

* Remove all to startup_user

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Add suggestion line

* Rebase fixes

* Update documentation to be more useful/accurate

* Cleanup of documentation

* Fix spacing inconsistency

* Revert unexpected change to keymap

* Add a mechanism for force building a particular community layout

* Add docs for FORCE_LAYOUT argument

* Update output name when FORCE_LAYOUT is enabled