* Add Zadig 101 to docs
* Add USBasp bootloader name
* Add links to the page
* Note the usual VIDs and PIDs for the bootloaders
* Add "List All Devices" note, just in case
* Talk about keyboard-specific bootloader procedures
* Send users to the new page in "Unknown Device for DFU Bootloader" section
* Halfkay bootloaders are also an exception here
* Update how_keyboards_work.md
bridged the gap between scancodes and keycodes, the doc didn't make the distinction and was ambiguous.
* Update docs/how_keyboards_work.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update docs/how_keyboards_work.md
fix typo
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update Layer functions to use layer_state_t in ZSA Boards
* Update Music Mask for ZSA boards
Fixes an issue with the board getting stuck on Adjust layer when activating music mode
* Add Support for SMART LED Toggle to Planck EZ
* Add support for SMART LED toggle in Ergodox EZ
* Ifdef swiss cheeze for Oryx Configurator
* Documentation and updates
* Add Oryx Keymap
* Add option to configure the layers for the Layer Indicator
* Update keymap with better examples
* Make sure eeprom is initialized before reading from it
* Force flush of LED matrix when suspending board
This fixes an issue where the LEDs don't fully clear sometimes when the host system goes to sleep
* Enable RGB Sleeping by default
* Add clarification about planck ez led layer config
* A little easier to read the definition of the GPIO control macro for AVR.
No change in build result.
* Changed to not use GNU statement expression extension.
No change in build result.
* Modified split_common/serial.c to use qmk_firmware standard GPIO control macro.
No change in build result.
* fix PE6 -> E6
* remove some space
* add some comment to config_common.h
* Changed split_common/serial.c to use a newer version of qmk_firmware standard GPIO control macro.
* Additional changes for Layer State typedef compatibility
* Replace biton32 with get_highest_layer in docs
* Change additional layer structure code
* Fix uGFX reference issue
* Remove dynamic_keymap check
* Where did all these extra spaces come from
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes
Key codes to swap and unswap the control and windows/cmd keys
* Fix issues with pull request #6110
Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end
* Move new keycodes to the end of the enum (#6110)
* add cases for swapped control and OS keys to mod_config (#6110)
* Add new keycodes to feature_bootmagic.md (#6110)
* Add R+L swap codes to keep in parity with AG_* codes
* Extend Magic range check to include new magic codes
* Update audio docs
* Combine 2 byte ranges into 1 word for EECONFG
Fix names for Keymap config EEPROM
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Optimize RGB Matrix rendering for Ergodox EZ
* Optimize RGB Matrix rendering for Planck EZ
* Update keyboards/planck/ez/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* removed some debug prints
* removed unnecessary files, tweaked some things
* rotary encoder button now connected into column 0, row 3
* tweaked keymap and moved encoder control into keymap
* tweaks
* added test keymap
* updated some things to make it easier to work with QMK configurator
* updates after merging latest master in
* fixed a few things
* removed test keymap and all related #ifdefs
* changed some dumbpad default keys, added KC_LOCK
* added image to readme
* added link to PCB github repo
* moved lock key to the rotary encoder pushbutton
* making suggested changes from @fauxpark in https://github.com/qmk/qmk_firmware/pull/6452
* adding bootmagic lite since i'm lazy and haven't soldered on the reset button...
* renamed to
* using 7 underscores for KC_TRNS
* adding my layout (default is for wife)
* updated my own layout, tweaked default keymap to use cleaner switch for encoder control
* removed commented out import from imchipwood keymap, removed unnecessary comment from default layout
* added LED layer control
* flash the layer indicator LEDs at startup
* change layer_state_set_user to layer_state_set_kb
Co-Authored-By: Joel Challis <git@zvecr.com>
* in layer_state_set_kb, return layer_state_set_user
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* remove include of upper level config.h, add pragma once
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* changing default keymap slightly, added config.h for default layout
* change _delay_ms to wait_ms
* replaced locking numlock with numlock
* Update keyboards/dumbpad/dumbpad.c
change `keyboard_pre_init_user` to `keyboard_pre_init_kb`
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/dumbpad/dumbpad.c
adding `keyboard_pre_init_user()` to `keyboard_pre_init_kb()`
Co-Authored-By: Joel Challis <git@zvecr.com>
* fixed some comments about the layer key (MO to TT) and the SUB layer rotary encoder control
* Move default keymap's rules to keyboard level
* Concatenate the two sets of rules
This sets CONSOLE_ENABLE to no, which was being set at the keymap level.
* Wrap the USB Device Description in quotes
Some preventative maintenance. The firmware for the_ruler can't be compiled without this change if `CONSOLE_ENABLE = yes` because this string has a comma, which gets picked up as two arguments by the Command code, instead of one as it should be.
* Linting
- remove firmware size impacts
- remove trailing white space
- visual alignment of rules
* Use QMK's pre-loaded default rules for atmega32u4
* Update readme
- markdown formatting
- update Hardware Availability link (Maple Computing's site has disappeared)
- update Docs links
* Update header files to use #pragma once
* Add universal flash command
* Add bootloader info to I:C boards
* Add support for ATSAM
* Add messages for flash target
* Message cleanup
* Add USB ASP Flashing target
* Make usbasp target more universal
* Add phoney target for usbasp
* Clarify error message when bootloader isn't matched
* Fix Clueboard hotswap gen1 not compiling when LED Matrix is disabled
* Move keymap.json to default keymap folder
* Revert "Move keymap.json to default keymap folder"
This reverts commit 7f28df909d.
* Add an alternative method for keyboard discovery to speed up build
* Chain MAKEFLAGS for docker_build.sh
* Slight improvement to number of items sent to sort
* Remove debug line
* Fix line escape
* Added Bulbizarre keymap for the XD75
* Fixed no newline at the end of file
* Update keyboards/xd75/keymaps/bulbizarre/readme.md
Co-Authored-By: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
* Update led status check
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove unnecessary define
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove led layer code
* enable PWM on STM32F303
* Unusable PWM code
* Updated PWM Stuff?
* PWM Semi-working
* Both LEDs working at the same time
* Update names
* Add led level functions
* Add LED levels and persistent settings
* Revert change due to issues with timing related code
* Review feedback and minor cleanup
* add Userspace and keymaps
* Adding keymaps for zeal60 and iris
* Created my own tap dance that toggles RGB Mode based on whether I toggled caps lock or not
* parent 578ed42a7f
author Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500
committer Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500
move to userspace
add zeal60
* update based on review
* move userspace to github name
Joel Challis
fauxpark
Drashna Jaelre
Elias
Chris Dosé
madivad
kakunpc
Takeshi ISHII
Stephen Wanhella
imchipwood
noroadsleft
Sid Carter
mikethetiger
Ceremony
kuchosauronad0
Mark Stosberg
Dong Zhou
ridingqwerty
Danny
Konstantin Đorđević
Joe Wasson
Vince Gellár
John M Daly
Seth Barberee
Jarred Steenvoorden
くまお工房
George Petri