* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

Co-authored-by: Erovia <Erovia@users.noreply.github.com>

Co-authored-by: Ryan <fauxpark@gmail.com>

* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback

changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard)

f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
  -> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit
bfe468ef1 start morphing wavetable
474d100b5 refined a bit
208bee10f play_notes working
3e6478b0b start in-place documentation of dac settings
3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right)
73853d651 5 voices at 44.1khz
dfb401b95 limit voices to working number
9632b3379 configuration for the ez
6241f3f3b notes working in a new way

* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback

changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms

this commit splits off the plank example keymap from commit
    f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both

* refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac

* refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation

pulls three copies of the same code into one function
which should improve readability and maintainability :-)

* refactoring: move common code of arm and avr implementation into a separate/new file

* refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs

* refactoring: audio_avr_pwm - replacing function defines with plain register defines

aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing

* add audio-arm-pwm

since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx)
this code works on a "BluePill" clone, with an STM32F103C8B

* clang-format changes on quantum/audio/* only

* audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths

* audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup)

* refactoring: remove unused file from/for atmel-avr chips

* refactoring: remove unused (avr) wavetable file

* audio_arm_dac: adapt dac_end callback to changed chibios DAC api

the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object.
this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count

* audio-arm-dac: show a compile-warning on undefined audio-pins

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* audio_arm_dac: switch from exemplary wavetable generation to sine only

sine+triangle+squrare is exemplary, and not realy fit for "production" use
'stairs' are usefull for debugging (hardware, with an oscilloscope)

* audio_arm_dac: enable output buffers in the STM32

to drive external loads without any additional ciruitry - external opamps and such

* audio: prevent out-of-bounds array access

* audio_arm_dac: add output-frequency correcting factor

* audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition

and do some code-cleanup, refine documentation, ...

* audio_arm_pwm: increase pwm frequency for "higher fidelity"

on the previous .frequency=100000 higher frequency musical notes came out wrong
(frequency measured on a Tektronix TDS2014B)
note | freq | arm-pwm
C2 | 65.4 | 65.491
C5 | 523.25 | 523.93
C6 | 1046.5 | 1053.38
C7 | 2093 | 2129
C8 | 4186 | 4350.91

with .frequency = 500000
C8 | 4186 | 4204.6

* audio refactoring: remove unused variables

* audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second

* audio: allow feature selection in rules.mk

so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up)
or select the "pin alternate" pwm mode, for example on STM32F103

* audio-refactoring: move codeblocks in audio.[ch] into more coherent groups

and add some inline documentation

* audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm]

untangeling the relation between audio.c and the two drivers
and adding more documenting comments :-)

* audio_avr_pwm: getting it back into working condition, and cleanup+refactor

* audio-refactoring: documentation and typo fixes

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* audio-refactoring: cleanup defines, inludes and remove debug-prints

* audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range

to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently
also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged'

* audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers

* audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable

* audio_chibios_dac: math.h has fmod for this

* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback

update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface

* audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines

have the user select a pin by configuration in rules.mk instead of a define in config.h
has the advantage of beeing in a common form/pattern across all audio-driver implementations

* audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines

* audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played

* audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG

through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency...

* audio-refactoring: get 'play_note' working again

with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue

* audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment)

* audio-refactoring: moore documentation

and some cleanup

* audio-avr-pwm: no fallback on unset AUDIO_PIN

this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy

* audio-refactoring: untangling terminology: voice->tone

the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet)

* audio-pwm: allow freq=0 aka a pause/rest in a SONG

continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion)

* audio-refactoring: audio_advance_note -> audio_advance_state

since it does not only affect 'one note', but the internally kept state as a whole

* audio-refactoring: untangling terminology: polyphony

the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time

* audio-chibios-dac: add zero-crossing feature

have tones only change/stop when the waveform approaches zero - to avoid audible clicks
note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too

* audio-refactoring: feature: time-multiplexing of tones on a single output channel

this feature was in the original avr-pwm implementation misnomed as "polyphony"
with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) )

* audio-avr-pwm: get music-mode working (again) on AVRs

with both pwm channels, or either one of the two :-)
play_notes worked already - but music_mode uses play_note

* audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE

since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note

* audio-arm-dac: per define selectable sample-luts

plus generation script in ./util

* audio-refactoring: heh, avr has a MIN...

* audio-refactoring: add basic dac audio-driver based on the current/master implementation

whereas current=d96380e65496912e0f68e6531565f4b45efd1623
which is the state of things before this whole audio-refactoring branch

boiled down to interface with the refactored audio system = removing all
redundant state-managing and frequency calculation

* audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER

* audio-arm-pwm: split the software/hardware implementations into separate files

which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained

* audio-refactoring: update documentation

* audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic

* audio-arm-dac: dac_additive: stop the hardware when the last sample completed

the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes

* audio-refactoring: make function-namespace consistent

- all (public) audio functions start with audio_
- also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note

* audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_

* audio-arm-dac: update (inline) documentation regarding MAX for sample values

* audio-chibios-dac: remove zero-crossing feature

didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway

* audio-arm-dac: dac_basic: respect the configured sample-rate

* audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle

like it already does in the avr implementation

* audio-refactoring: get VIBRATO working (again)

with all drivers (verified with chibios_[dac|pwm])

* audio-arm-dac: zero-crossing feature (Mk II)

wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones

* audio-refactoring: re-add note-resting -> introduce short_rest inbetween

- introduce a short pause/rest between two notes of the same frequency, to separate them audibly
- also updating the refactoring comments

* audio-refactoring: cleanup refactoring remnants

remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system

also updates the TODOS

* audio-refactoring: reserve negative numbers as unitialized frequencies

to allow the valid tone/frequency f=0Hz == rest/pause

* audio-refactoring: FIX: first note of melody was missing

the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone
and some code-indentations/cleanup of related parts

* audio-arm-dac: fix hardware init-click

due to wron .init= value

* audio-refactoring: new conveniance function: audio_play_click

which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features

* audio-refactoring: clang-format on quantum/audio/*

* audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c

* audio-refactoring: use milliseconds instead of seconds for 'click' parameters

clicks are supposed to be short, seconds make little sense

* audio-refactoring: use timer ticks instead of counters

local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature
decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway

* audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks

* audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c

also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines

* audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision

since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace

* audio.c: stop notes after new ones have been started

avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks

* audio.c: bugfix: actually play a pause

instead of just idling/stopping which lead the pwm drivers to stop entirely...

* audio-arm-pwm: pwm-software: add inverted output

new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT

* audio-arm-dac: basic: handle piezo configured&wired to both audio pins

* audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring

* audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps

avoids running into issues when the uint32 of the timer overflows

* audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST

* audio_arm_dac: basic: add missing bracket

* audio.c: fix delta calculation

was in the wrong place, needs to use the 'last_timestamp' before it was reset

* audio-refactoring: buildfix: wrong legacy macro for set_timbre

* audio.c: 16bit timerstamps suffice

* audio-refactoring: separate includes for AVR and chibios

* audio-refactoring: timbre: use uint8 instead of float

* audio-refactoring: duration: use uint16 for internal per-tone/note state

* audio-refactoring: tonemultiplexing: use uint16 instead of float

* audio-arm-dac: additive: set second pin output-low

used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE

* audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h

to be consistent with how other features are handled in QMK

* audio-refactoring: buildfix: wrong legacy macro for set_tempo

* audio-arm-dac: additive: set second pin output-low -- FIXUP

* audio.c: do duration<>ms conversion in uint instead of float

on AVR, to save a couple of bytes in the firmware size

* audio-refactoring: cleanup eeprom defines/usage

for ARM, avr is handled automagically through the avr libc and common_features.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* audio.h: throw an error if OFF is larger than MAX

* audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop

to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW

one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE
show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise.
the extra pusles probably matter little, since this is no high-fidelity sound generation :P

* audio-arm-dac: additive: move zero-crossing code out of dac_value_generate

which is/should be user-overridable == simple, and doing one thing: providing sample values
state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback

* audio-arm-dac: dac-additive: zero-crossing: ramping up or down

after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally
same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output

* audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing

fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause

* audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF

1/2 MAX was probably exemplary, can't think of  a setup where that would make sense :-P

* audio-arm-dac: update synth_sample/_wavetable for new pin-defines

* audio-arm-dac:  default for AUDIO_DAC_VALUE_OFF

turned out that zero or max are bad default choices:
when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late

* audio-arm-dac: additive: use DAC for negative pin

instead of PAL, which only allows the pin to be configured as output; LOW or HIGH

* audio-arm-dac: more compile-time configuration checks

* audio-refactoring: typo fixed

* audio-refactoring: clang-format on quantum/audio/*

* audio-avr-pwm: add defines for B-pin as primary/only speaker

also updates documentation.

* audio-refactoring: update documentation with proton-c config.h example

* audio-refactoring: move glissando (TODO) to voices.c

refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c

still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input?

* audio-refactoring: cleanup: one round of aspell -c

* audio-avr-pwm: back to AUDIO_PIN

since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5
so there is no need to deal with separate defines like AUDIO_PIN_B5

* audio-refactoring: add technical documentation audio_driver.md

which moves some in-code documentation there

* audio-arm-dac: move AUDIO_PIN checks into c-code

instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler)

* audio-arm-dac: compile-fix: set AUDIO_PIN if unset

workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error"

* audio-refactoring: document tone-multiplexing feature

* audio-refactoring: Apply suggestions from documentation review

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* audio-refactoring: Update docs/audio_driver.md

* audio-refactoring: docs: fix markdown newlines

Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>).

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* audio-arm-dac: additive: fix AUDIO_PIN_ALT handling

* audio-arm-pwm: align define naming with other drivers

Co-authored-by: Joel Challis <git@zvecr.com>

* audio-refactoring: set detault tempo to 120

and add documentation for the override

* audio-refactoring: update backlight define checks to new AUDIO_PIN names

* audio-refactoring: reworking PWM related defines

to be more consistent with other QMK code

Co-authored-by: Joel Challis <git@zvecr.com>

* audio-arm: have the state-update-timer user configurable

defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c)
stm32f1 might need to set this to GPTD4, since 6 and 8 are not available

* audio-refactoring: PLAY_NOTE_ARRAY was already removed in master

* Add prototype for startup

* Update chibiOS dac basic to disable pins on stop

* Add defaults for Proton C

* avoid hanging audio if note is completely missed

* Don't redefine pins if they're already defined

* Define A4 and A5 for CTPC support

* Add license headers to keymap files

* Remove figlet? comments

* Add DAC config to audio driver docs

* Apply suggestions from code review

Co-authored-by: Jack Humbert <jack.humb@gmail.com>

* Add license header to py files

* correct license header

* Add JohSchneider's name to modified files

AKA credit where credit's due

* Set executable permission and change interpeter

* Add 'wave' to pip requirements

* Improve documentation

* Add some settings I missed

* Strip AUDIO_DRIVER to parse the name correctly

* fix depreciated

* Update util/audio_generate_dac_lut.py

Co-authored-by: Jack Humbert <jack.humb@gmail.com>

* Fix type in clueboard config

* Apply suggestions from tzarc

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Johannes <you@example.com>
Co-authored-by: JohSchneider <JohSchneider@googlemail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joshua Diamond <josh@windowoffire.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>

Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>

* initial crkbd rjhilgefort keymap

* finished v1 of rjhilgefort's crkbd keymap

* Update keyboards/crkbd/keymaps/rjhilgefort/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/rjhilgefort/readme.md

* Update keyboards/crkbd/keymaps/rjhilgefort/readme.md

* Update keyboards/crkbd/keymaps/rjhilgefort/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Initial commit for my Corne keyboard layout.

* Updates to Corne, etc.

Finished working on primary layout for Corne keyboard.
Cleaned up some comments for my 4x12 Ortho layout.

* Changes for crkbd layout

* Fixed the config.h to reflect using ee_hands

* Added RGB configs to crkbd/corne layout

Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>

* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change

* update keymap for unikorn

* add new map

* update keymap

* update keymap

* update map

* update the current keymap

* update keymap so it accounts for mouse keys as well

* add extra control and shift, for when we need to use the other keys

* get me square and curly braces

* remove unused macros

* update these changes so far

* update ilpse keymap

* rmove a layer and simplify my layers a bit

* I think there's a working keymap now for the corne. let's leave this here.

* I thought maybe that helped? but who knows

* save changes made so far

* update madhatter keymap to match what I want

* switch to use lcmd for main alt

* update my curiosity keymap

* make curiosity via enabled

* add via keymap

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/primekb/prime_e/keymaps/madhatter/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* stick to enum

* add bootmagic stuff and update keymap

* switch to bootmagic lite

* fix typo

* cleanup for writing to LED

* consistency

* fix led pins

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* fix build issue

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Khader Syed <khader.syed@aicure.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

* Refactor the crkbd/via keymap and fix OLED bugs

* Revert "Refactor the crkbd/via keymap and fix OLED bugs"

This reverts commit dc9db029fc.

* Fix OLED display bugs

* Remove unused functions

* Remove uncessary the key logger

* Add new lines at end of file

* Remove unnecesary extern for is_master

* Remove extern is_master from rev1.h

* Remove ssd1306 from common dir because its the legacy lib

* Update default keymap based the via keymap

* Remove foostan keymap because it will be legacy

* Revert Remove unnecesary extern for is_master

* Remove unnecessary backslashes.

Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks

* Remove outdated Crkbd Ctrl key positioning info

* Add Left Alt key to Lily58 keymap

* Lily58 no longer overrides default TAPPING_TERM

* Refactor Crkbd keymap to use new community layout

* Fix underglow animations for Crkbd w/ Split Common

* Add initial Eco keymap

* Update outdated reference to Crkbd layout

* Add keymap links to userspace readme

* Add copyright notices to files changed in this PR

* Add Launchpad keymap

Note: RGB and Audio won't work when using B pins for audio

* Add support for rgb matrix on launchpad

* Update config for launchpag

* Disable wait on layer change

* Update config for ErgoDox EZ

* Fixup rgb light userspace code

* Move Corne layout to community layouts folder

* Update config for corne to support community layouts

* Add license header to files

* Minor cleanup of userspace config

* Update Pimironi Trackball code

* Increase debounce time on ergodox

* Fix keymap handling

* Enable wait for USB for moonlander

* Update/add license headers

* fix review issues

* Swap ergo lower layer shortcuts for zoom keys

* [Keyboard] Convert Corne Keyboard to Split Common

* Add VIA Support

* Makes sure that ol(e)d and new OLED implementation can't coexist

* Add licensing header to files

* Add changes based on feedback from foostan

* Fixes

* Better handle LTO_ENABLE

Especially when calling from command line

* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE

* Remove long for LTO from show_options.mk

* Add split_3x5_3 support to Minidox

* Add split_3x5_3 support to Miniaxe

* Add LAYOUT_mini to Centromere

This layout macro removes the need or KC_NO keycodes in the keymap.

* Add split_3x5_3 support to Centromere

* Add split_3x5_3 support to suihankey split

* Add LAYOUT_mini to centromere/info.json

* Add LAYOUT_mini to crkbd

* Add split_3x5_3 support to crkbd

* Change mini layout names

* Rename main layouts for split_3x6_3 keyboards

* Use split_3x5_3 macro for remaining keyboards

* Update relevant info.json files

* Fix suihankey/split/alpha macro

* Add layout aliases for suihankey

* Switch Chrome OS mouse keys workaround to NKRO

* Add NKRO toggle to keymaps

* USE NK_TOGG keycode instead of defining my own

* Re-enable mouse keys to fix Chrome OS media keys

I'm not sure if there's a bug in Chrome OS, QMK, or both, but
EXTRAKEY_ENABLE isn't sufficient for media keys to work on Chrome OS.
Instead, MOUSEKEY_ENABLE is also required.

* Remove unnecessary SPLIT_USB_DETECT for Lily58

I've since swapped my Lily58 back to Elite-C v2 controllers with working
VBUS detection.

* Move Crkbd Esc and Ctrl keys; add some shortcuts

* Move MC_ALTT to userspace for cross-board support

* Sync Lily58 keymap with Crkbd

* Fix typos

- Add mouse buttons overlay layer
- Change button order
- Remove crkbd hardware specifics
- Add alternative base layer alphas
- Change title
- Add logo
- Reword intro text
- Add dev branch and new commits links
- Replace manual toc and remove anchors
- Unindent lists
- Reduce headings
- Update docs
- Build keymap as object instead of including .c file
- Add kle subset mapping images
- Add alternative mapping support
- Change default mapping for ortho_4x12
- Add split mapping for ortho_4x12
- Add contact section
- Add #pragma once to layout and keyboard config.h

OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes

* initial draft maps

* updates to the keymap to enable LED

* does one still have to do these shenanigans?

* update keymap with lights

* update OLED stuff

* update corne config

* update singav3 pcb config

* update ilpse config and map

* update prime keymap as well

* update the keymap for prime_e

* update tapping term and keymap

* switch numbers to the raise layer

* move nav to lower

* add mousekeys as well

* some fixes

* update keymap

* add my layout for space65

* update map

* update keymap

* add grave key

* update  config for my keymap

* update keymap

* switch to newer mechanisms

* grave on capslock

* cleanup

* udpate config

* update keymap

* Update keyboards/gray_studio/space65/keymaps/madhatter/rules.mk

* Update keyboards/gray_studio/space65/keymaps/madhatter/keymap.c

* Update keyboards/crkbd/keymaps/madhatter/rules.mk

* Update keyboards/crkbd/keymaps/madhatter/rules.mk

* Update keyboards/gray_studio/space65/keymaps/madhatter/keymap.c

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

* Update keyboards/primekb/prime_e/keymaps/madhatter/config.h

* Update keyboards/gray_studio/space65/keymaps/madhatter/config.h

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

* Update keyboards/wilba_tech/wt75_b/keymaps/madhatter/config.h

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

* Update keyboards/gray_studio/space65/keymaps/madhatter/config.h

* Update keyboards/primekb/prime_e/keymaps/madhatter/config.h

* Update keyboards/wilba_tech/wt75_b/keymaps/madhatter/config.h

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

* Update keyboards/crkbd/keymaps/madhatter/keymap.c

* Update keyboards/primekb/prime_e/keymaps/madhatter/keymap.c

* Update keyboards/crkbd/keymaps/madhatter/readme.md

* remove file I don't use

* Add custom corne keymap

* Clean up rules.mk

* Clean up base layer on keymap.c

* Clean up lower layer on keymap.c

* Clean up raise layer on keymap.c

* Clean up adjust layer in keymap.c

* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"

* Move menu key on ergo boards to match staggered

* Unify 60_tsangan_hhkb and 60_ansi_split_bs_rshift

* Sync KBD67, Quefrency with community layouts

* Update ergo KLE images

* Update community layout KLE images

* Update KLE images/descriptions for remaining keebs

* Remove more mouse keys settings missed in #8836

* Turn off more unwanted make options

* clang-format my userspace

* Reword ergo layout docs so Crkbd is canonical

* Add a basic readme to my userspace

* Tweak Crkbd readme wording and fix typos

* Enable SPLIT_USB_DETECT for Lily58 w/ Elite-C bug

* Enable External EEPROM on Planck Rev6

* Update KC_MAKE macro to use qmk cli util

* Disable additional gradients for rgb matrix

* Update analog code for newer methods

* Update ergodox layout

* Disable Grave Escape

* Cleanup OLED code a bit

* Remove old unicode code

* Seperate RGB Matrix code from RGB Light code in userspace

* Massive overhaul an generalization of personal OLED code

Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.

* Super tiny cleanup

* Enable Diablo layer on kyria

* clang format pass

* Additional OLED cleanup

* [keymap(ninjonas)] ninjonas keymap updates

* [refactor] switching encoder rotation logic. recent pull seems to have flipped encoder stuff

* [keymap(lily58)] added chrome change profile key on RAISE

Co-authored-by: Jonas Avellana <jonas.avellana@workday.com>

* Clean up includes for glcdfont headers

* Remove pragma once, most of these are not headers

* Missed these

* Move Grave/Tilde keys to more convenient places

* Move Ins/Del and some other keys around

* Update KLE images

* [keymap] ninjonas keymap updates

* [refactor(kyria)] updating keymap for numpad layer to be transparent rather than ignores

* [keymap(lily58)] added numpad layer

* [keymap(crkbd)] added numpad layer activated through tapdance

* [fix(8170)] fixing code review changes requested by noroadsleft

* [fix(8170)] updating comments and .md files to use 'Cmd' instead of  and ⌘

* Explicitly undef things I override in keymaps

* Reduce TAPPING_TERM back to default

* [keymap(kyria)] moved OLED & encoder implementation to separate classes

* [feat] created logic to cycle through hue wheel when starting keyboard

* [feat] created logic to cycle through hue wheel and return to user's default color

* [refactor] updating OLED layout for crkbd & lily58

* [refactor] updating OLED layout for crkbd & lily58

* [fix(8070)] updating encoder.c logic based off drashna's code review

* [refactor(8070)] added key to send  + Shift + M

* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output

* Added missing readme

* Oled Timeout Update for KidBrazil Keymap (#1)

* Setup Oled timeout based on simple timer

* Cleaned up comments and added timeout for LEDs

* Fixed some small errors

* Updated oled timout with matrix scan

* Updated oled timout with matrix scan

* Update withou eeprom

* Update timer code

* Use process user instead of keymap

* Added ifdef to protect oledtimer

* Updated with half timeout state for logo

* Removed middle tier timer

* Final cleanup of unused files

* Updated code as per suggestions & requests

* Second round of revisions

* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands

* Finished adding the timeout for OLED and testing on CRKBD

* Updated documentation

* fixed the timeout logic so it works as intended

* Added initial limits to color settings

* Added layer reset as part of the iddle timeout process

* Split Keymap into more manageable files

* Finalizing RGB Layer status on CRKBD
- Refactored OLED timeout to deal only with oled
- If user remains iddle on game layer for too long it will switch to
default
- LED / OLED iddle working
- Minor changes to _SYM layer
- Removed some rgb controls from keyboard due to layer dependent RGB
colors

* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c

Used suggestion from Drashna to replace EEPROM_RESET with shorter version.

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Implemented drashna's comment

Co-authored-by: Drashna Jaelre <drashna@live.com>

* added rgblight controls to planck keymap

* fixed knight ridder offset to face me

* no oled for crkbd 'till fixed

* fixed RGB effect name

* Update keymaps for split ergo boards

* Update keymaps for 60% boards

* Userspace refactor

* Fixed missed ifdef

* tapcode16, adjust layout

* glcdfont changes from #7745

* Modify Keymaps, add workman

* RGB & OLED update

* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output

* Added missing readme

* Oled Timeout Update for KidBrazil Keymap (#1)

* Setup Oled timeout based on simple timer

* Cleaned up comments and added timeout for LEDs

* Fixed some small errors

* Updated oled timout with matrix scan

* Updated oled timout with matrix scan

* Update withou eeprom

* Update timer code

* Use process user instead of keymap

* Added ifdef to protect oledtimer

* Updated with half timeout state for logo

* Removed middle tier timer

* Final cleanup of unused files

* Updated code as per suggestions & requests

* Second round of revisions

* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands

* Finished adding the timeout for OLED and testing on CRKBD

* Updated documentation

* fixed the timeout logic so it works as intended

* Update keyboards/crkbd/keymaps/kidbrazil/README.md

* Left-right gradient.

* Update the comment to match the new functionality.

* CPP does integer division so this round is not necessary.

* The x-range is actually 224, update comment and use bit-shifting again.

* Update docs with gradient left-right effect and associated "DISABLE" option.

* Added my UT47.2 Swedish layout with tap dance function.

* Move tap dance over to user space

* Removed config_common from config file

* Changes to workspace with new support for code16. Tested ok

* Swedish support

* Added code16 version of tapdance to userprofile.

* Created 4th layer and updated readme file. Removed ascii rep of layout.

* Tabdance updates

* Removed duplicated RGB keys.

* Added hvp minivan config

* Fixed tapdance key maps

* Added Planck 1 space base hvp layout

* Start of hvp xd75 layout. Way to many keys

* Added working config ink test for atreus62

* fixed smaller layout changes

* Updated tap dance with option 5

* Added better thump keys

* Created lets split layout

* Removed not used modes

* Updated to correct url

* Readme file

* Atreus62 readme

* Cleanup of keymap file

* Added tap dance

* Fixed missed adjustment

* Added hvp planck setup

* Update ascii

* will this work better?

* removed ascii

* Planck 1 space setup

* Fixed ascii local

* Added Corne setup

* Changes for lets split

* Atreus62 config

* Added Lily58

* Setup corne

* Setup planck

* Updated lets split

* UT47 setup

* Setup a The Vanboard.

* Alt Ctrl

* #define D_NAVI MT(MOD_LCTL | MOD_LSFT, KC_D)

* Fix D_NAVI & plank midi

* Fixed PR comments

* Added pragma

* Moved def to user space

* Removed not used endif

* Added def to users space

* Added rules to van

* Removed not used part of config

* Removed not used layout

* Removed not needed comments

* Remove not needed keymap_config_t

* Removed broken ascii from readme files and removed not needed rules

* Added spaces to readme file

* Removed xd75 from branch