* Add VIA support to mxss and general cleanup
* Add support for RGB test for FLEDs
* Add LAYOUT_all to allow for more configuration
* Remove blank layers
* Updated readme
* Improve use of EEPROM
* Credit where its due
* Use the latest iteration of rgblight code
* Keep the RGB timer running if the front LED is in RGB mode
* Fix RGB breathing animation
* Better supported RGB animation
Only thing not working is alternating, but that's not too important
* Abstract front LED handlers from main kb code
* Add support for indicator LED color changing
* Remove debug statement
* Persist indicator LED colors
* Mark custom sections in rgblight.c
* Light commenting
* Fix up keymaps
* Add/update comments
* Remove bloat from default hex
* Tidy a stray tab
* Out with the old, in with the new
* Out with the old, in with the new
* Add LAYER_STATE_8BIT for VIA keymap
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands
* Finished adding the timeout for OLED and testing on CRKBD
* Updated documentation
* fixed the timeout logic so it works as intended
* Added initial limits to color settings
* Added layer reset as part of the iddle timeout process
* Split Keymap into more manageable files
* Finalizing RGB Layer status on CRKBD
- Refactored OLED timeout to deal only with oled
- If user remains iddle on game layer for too long it will switch to
default
- LED / OLED iddle working
- Minor changes to _SYM layer
- Removed some rgb controls from keyboard due to layer dependent RGB
colors
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Used suggestion from Drashna to replace EEPROM_RESET with shorter version.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Implemented drashna's comment
Co-authored-by: Drashna Jaelre <drashna@live.com>
- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
* fix audio enable repetition
* remove RGB LED support as this board has no RGB LB LEDs
* use pragma once
* this board has no backlight support
* enable COMMAND_ENABLE
* comment cleanups
* setting bootmagic to lite as the first board thathat has this PCB has a solid bottom. If someone forgets to put in a RESET key on their keymap, they are not going to have fun resetting the board
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* convert the palset and palclear routines to setpinoutput and writepinlow
* remove scankb
* restore original guards instead of pragma once
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Swap two cols to fix skog lite
* Fix readme
* Suggested formatting
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* both backspace and left shift matrix positions off by one
* update the led_update routine
* update readme
* Update keyboards/gray_studio/think65/solder/solder.c
* Add DZ60 to VIA
* Changed vendor id from 'KF' to 'DZ'
* Capitalize hex
* Fix Via_layout_options size setting
* Update keyboards/dz60/keymaps/via/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* WIP do not merge
* first pass at custom preonic layout
* add auto shift and reset via leader key
* Update readme
* update copyright notice
* formatting changes
* fix: use MO instead of process_record_user
* added backslash and moved grave position
* remove extraneous 'j' characer in NUMPAD template
* update template formatting
* remove process_record_user
* swap "!" with "@"
* fix readme formatting
* update readme layout image
Commandline args should be merged with the submodule's config.
Compare config values to None instead of False, so empty lines and False
can be used as values.
* Add mx5160 keyboard
* Make necessary changes for merging
rules.mk cleanup, QMK's built in alias for KC_TRNS and change readme blurb
* Add info.json as well
* Update readme, info.json
* Change layout name, update led function
* Fix info.json
* Update rules.mk
Jumail Mundekkat
yiancar
James Young
Lucas Moreira
QMK Bot
George Harris
fauxpark
yohewi
Joel Challis
skullydazed
James Young
Wilba
Xelus22
Nick Brassel
Akaash Suresh
Max Rumpf
Cable Car Designs
MechMerlin
Brett Inman
Rossman360
dsanchezseco
Dmitrijs Minajevs
Alfred Maler
Salicylic-acid3
clovervidia
Erovia
Spaceman
Maarten Dekkers