related to https://github.com/kinx-project/kint/issues/39
related to https://github.com/qmk/qmk_firmware/pull/12626

* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only

The right-most top-most key on the Kinesis Advantage keyboard is labeled
“Progrm” and was meant to enter the Teensy bootloader as per the comment.

However, the keycode was set to KC_1, which just produces a “1”.
It should be RESET instead.

This commit fixes KC_1 to RESET in all files where the fix is needed.
The other files have already been fixed independently.

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes

* Remove legacy print backward compatiblitly

* Remove legacy print backward compatiblitly - core

* revert comment changes

* Refactor to use led config

* Refactor to use led config

* Refactor to use led config

This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.

* [Keyboard] Kinesis + Pro Micro init

- docs for DIY
- custom matrix = lite
- a near-factory dvorak mapping
- optimized debouncing for lower latency

* chore: reformatting

* chore: update doc

* chore: cleanups according to PR feedback

* chore: PR feedback

* fix: compile error

* chore: add include

* fix: LEDs hanging after USB disconnect

* chore: enable QMK goodies by default

* chore: use semantic write pin

* branch keyboards/kinesis/kint2pp from keyboards/kinesis/stapelberg

Changes will be made in the next commit

* [Keyboard] update wiring for kinT (kint2pp variant)

* add QMK plumbing

* Apply zvecr’s suggestions from code review

* Update keyboards/kinesis/kint2pp/config.h

* Update keyboards/kinesis/kint2pp/config.h

* remove superfluous config.h include

* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"

* Mitor Tweaks

Updating Dvorak keymap to change location of Slash and Backslash
to positions more in line with my 12x5 and similar ortho layouts

* Fixed readme.md

Tidied up the readme and make some minor changes.

* Adding atreus config file

Adding a config file for my Atreus keyboard. This is to help with
the keychatter issues I've been having on my Atreus.

* Changes as requested per @zvecr

Added `#pragma once` to beginning of config.h file as requested
by @zvecr.

Made the MACLOCK key easier tu use by putting it on right thumb
cluster as well.

* Move some common matrix code to a common location

* Refactor some 'custom_matrix_helper' logic to use custom matrix lite

* Fix build for kinesis/stapelberg - abuse of vpath was picking up matrix.c from core when custom matrix was enabled

* Add validation for CUSTOM_MATRIX

* Update Kinesis keymap

Added a MACLOCK macro to lock my mac easier

* Updated readme.md

* Added WOW layer

* Initial commit for this branch. Still a work in progress.

* Added Rorschach keyboard layout.

* Simplified keymap

Removed the media layer to help simplify things. Also corrected some
keymap mistakes in the Qwerty and Colemak layers.

* Added ErgoTravel keymap.

* reverted to previous layout.

* Added Sol keyboard layout.

* Minor changes to keymap.

* more changes

* Added sol graphic by Kagerufu and Cardiactuna

* Added colemak layer because I can.

* more changes to sol layout

* Streamlined Sol layout

* minor tweaks to sol layout

* further revisions to sol keymap.

* Removing deprecated #include statements from my keymaps

* Standardizing keymap `include` lines.

* Minor change to keymap.

Swapped ESC with GRV on all alpha layers.

* Tweaks to Atreus62 Keymap

Added a layer for FPS RPG Loot Shooters.

* Fixed readme.md for Atreus keymap.

Replaced "Keymap" with "Layer" in illustrations for continuity's sake

* More readme.md clean-up

More clarification in the Atreus readme file.

* Next verse, same as the first.

* Changes to Sol layout

Bringing my Sol layout more in line with my other Orthos.

* Fixed keymap GUI.

Replaced left-hand "RGUI" with "LGUI" on all layers as it should be.

* Added ALPS64 keymap

* Formatting corrections

* fixes to config.h and keymap.c

* Fixed errors

This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h
and removes an stupid comma at the end of each LAYOUT stanza in
keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me.

* Fixed orthodox keymap config.h file

I hope this one fixes the problem. *sigh*

* Making suggested changes for PR#6192

Thanks to noroadsleft, fauxpark, and drashna. Still have
more work to do, but at least these suggestions have been applied.

* Fixing build errors

Travis has shown me the error of my ways...

* More fixes and corrections

Those pesky semicolons...

* More Fixes.

* Removing unneeded code snippet.

* fixed omitted semicolons

* Code updates to my keymaps

Updating the code for my Iris, Atreus62, and Atreus keymaps.

* Fixed Atreus62 Keymap

I forgot to add in the aliases for LOWER, RAISE, and ADJUST.

* Added userspace

Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro

* Fixing code that disables LEDs on ProMicros
Also tidied up my ErgoTravel keymap.

* Moving userspace to new branch

Moving my userspace to a new branch for the sake of keeping things
clean on the master branch.

* Added F13-F15 to Atreus62 Layout.

* Update readme.md.

* Updated Phantom keymap to current keymap standards

* Phantom keymap updates

Further updates - tidying and removing cruft.
Thank you zvecr on Discord for the help!

* Standards Updates

Bringing my Kinesis keymap up to current code standards

* Adding a readme

* Bring GH60 code to standard

* Utilizing layouts for 60_ansi and tkl_ansi

Moving my GH60 and Phantom keymaps into layouts/community/

* Alps64 layout removal

Removing my Alps64 keymap now that I've setup my 60_ansi layout.

* Moved Clueboard layout to community/66_ansi.

* Additions to 66_ansi config.h

* Bringing keymaps up to standard.

* More updates to keymaps.

* Syntax updates

* Revert "Syntax updates"

This reverts commit a892b2d9fc.

* Moved WIP keymaps

Moved my WIP keymaps to my wip_keymaps branch to keep my master clean

* Updates requested by noroadsleft

* more changes per noroadsleft

More fixes as requested by noroadsleft. Further tidy-up and
standardization of my keymap code.

* Cleanup rules.mk for 32U4 keyboards, I-K

* Clean up ivy rules.mk

Previously suggested parts are hard to find or non-existent.  Update with available part numbers.

* Remove/migrate action_get_macro()s from default keymaps

* Leave these breaks alone

* Added 'tuesdayjohn' folder; updated old readme.md

* Update keymap.c

* Update readme.md

* Update keymap.c

* Added personal keymap to BFO-9000; cleaned up personal Kinesis and Rorschach files

Added personal keymap to BFO-9000; cleaned up personal Kinesis and Rorschach files

* Update keymap.c

* Update keymap.c

* Update keymap.c

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Cleanup Default Keymaps to conform to QMK Firmware standards

* Minor fixes

* Revert some changes

* Add kinesis layout.

* Remove unneeded code.

* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition

* Remove QUANTUM_DIR code blocks from keyboard rules

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.

* remove QUANTUM_DIR code blocks from rules for default keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.

* remove QUANTUM_DIR code blocks from rules for user keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)

* remove QUANTUM_DIR code blocks from rules for community layouts

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.

* remove QUANTUM_DIR code blocks from rules for userspaces

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.

* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.

* fixing ortho_4x12 configs

* Using upstream/master version instead

* Additions and Corrections

Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts

* Rules for vitamins_included

Added a section to disable RGB underglow for the Let's Split
   Vitamins Included board.

* fixing ortho_4x12 configs

* Using upstream/master version instead

* Additions and Corrections

Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts

* Creating my own userspace

* Added Rorschach keymap

* renamed userspace folder

I renamed my userspace folder since I'm not ready to start using
it just yet, and I want to get my keyboards programmed. This is
a temporary thing and will be fixed later as I get time.

* adding files in "new" folder

* Disabling LEDs on Pro Micro

* Modifications to Kinesis keymap

* More kinesis tweaks

* removed userspace from master

Created a new branch for my userspace stuff. I'll work on it there.

* Moved keymap to separate branch

Moved the Rorschach keymap I was working on to a separate branch
for development purposes. Not ready to push it up to upstream
master.

* Added keymap for Rorschach

* Rorschach update

* Minor updates to Kinesis files

* Minor fixes

* Minor fixes for Rorschach

* Rules for vitamins_included

Added a section to disable RGB underglow for the Let's Split
   Vitamins Included board.

* fixing ortho_4x12 configs

* Using upstream/master version instead

* Additions and Corrections

Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts

* Updated readme

* Adding Rama M10-A Macropad

* ch-ch-ch changes...

* Major overhaul based on SMT's keymap.

* more changes.

* Moved the FKeys to the ADJUST layer.

* More rearranging.

* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX

* Added OrthoDox layout.

* More layout changes.

* Fixing things with the keyboard.

* Finishing touches.

Set left-hand master in config.h
Embedded the arrow keys in keymap.c

* Revised keymap making this easier to use.

* additions and changes.

* changes to various keymaps.

* Minor adjustments to OrthoDox layout.

* Added Eco keymap. Updated Let's Split keymap.

* Added gherkin

* Removed my M10A keymap

* Planck Keymap Updates

Updated my Planck keymap and created a simple keymap for Seph's Preonic.

* Added readme

* readme fixes

* Update readme.md

more clarification

* Keymap Tweaks

Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.

* Added Readme

I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.

* Fixed Keymap Error

* Fixed Readme

* adding iris and levinson keymaps

* Tweaks to keymap

* added youngJZ keymap

* Changes to keymap
Added a readme.md

* Levinson changes

Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.

* fixed readme

* changes to keymaps

* Updated keymap

* Updated readme.md

* Updated Readme (again)

* Updated Readme

Fixed formatting. Again.

* Updated readme

This is the last readme update for this keyboard update. I hope.

* Added Contra keymap

* Kinesis Keymap Update

* Updated Keymaps

I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.

* Clueboard Keymap update

Added media keys to my Clueboard 66 Rev2 layout.

* Added keymap

Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
 LEDs on the Pro Micros.

* New Zen keymap

Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.

Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.

The config.h file changes enable ee_hands.

* A few changes for useability

I made a few changes to the Minidox keymap to see if I can't make it more useable.

I'm also working on streamlining the Zen keyboard keymap to reduce layers.

* Re-vamped Iris keymap.

* changes

* minor keymap change

This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.

* Added Fourier keymap

* Keymap Cleanup

Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.

* Keymap Adjustments

Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.

* minor tweaks

Added code to disable red ProMicro LEDs after flashing.

* Clean-up

* Corrections to keymap.

Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.

* Changes to make this fall in line with the new Layout features

* Moving to LAYOUTs for 4x12 boards

* fixed config.h file

* standardization changes

* Reverted Atreus62 keymap to LAYOUT format

* Switch Preonic and Nyquist to ortho_5x12

* Corrections to config.h

* config.h file tweaks

* config.h file tweaks

* Added missing integers.

* Updated Seph's keymap to LAYOUT standard.

* Keymap tweaks & changes

* Bringing keymap up to LAYOUT standard

* Trying to get LEDs working

* Fixes for Stapelberg

Updated my keymap to confirm to the new LAYOUT standard.
Updated the stapelberg.h to reflect this LAYOUT standard.
Updated the stapelberg.c files to hopefully get the LEDs working.

* Getting closer to Kinesis LED functionality.

* NKRO Fix

Disabled NKRO for VUSB ortho_5x12 boards

* Matrix refactor

* Keymap refactor

* Configurator support

* Stapelberg readme formatting fix (missing grave accent)

* Updated info and fixed minor errors

* Updated folder name; overdue updates to keymap and readme files

Updated folder name; overdue updates to keymap and readme files

* Updated tri-layer feature

* Revert "Updated tri-layer feature"

This reverts commit 59b8b85761.

* Updated tri-layer on keymap

* Fixed typos

* Updated keymaps

* Adding Rama M10-A Macropad

* ch-ch-ch changes...

* Major overhaul based on SMT's keymap.

* more changes.

* Moved the FKeys to the ADJUST layer.

* More rearranging.

* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX

* Added OrthoDox layout.

* More layout changes.

* Fixing things with the keyboard.

* Finishing touches.

Set left-hand master in config.h
Embedded the arrow keys in keymap.c

* Revised keymap making this easier to use.

* additions and changes.

* changes to various keymaps.

* Minor adjustments to OrthoDox layout.

* Added Eco keymap. Updated Let's Split keymap.

* Added gherkin

* Removed my M10A keymap

* Planck Keymap Updates

Updated my Planck keymap and created a simple keymap for Seph's Preonic.

* Added readme

* readme fixes

* Update readme.md

more clarification

* Keymap Tweaks

Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.

* Added Readme

I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.

* Fixed Keymap Error

* Fixed Readme

* adding iris and levinson keymaps

* Tweaks to keymap

* added youngJZ keymap

* Changes to keymap
Added a readme.md

* Levinson changes

Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.

* fixed readme

* changes to keymaps

* Updated keymap

* Updated readme.md

* Updated Readme (again)

* Updated Readme

Fixed formatting. Again.

* Updated readme

This is the last readme update for this keyboard update. I hope.

* Added Contra keymap

* Kinesis Keymap Update

* Updated Keymaps

I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.

* Clueboard Keymap update

Added media keys to my Clueboard 66 Rev2 layout.

* Added keymap

Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
 LEDs on the Pro Micros.

* New Zen keymap

Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.

Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.

The config.h file changes enable ee_hands.

* A few changes for useability

I made a few changes to the Minidox keymap to see if I can't make it more useable.

I'm also working on streamlining the Zen keyboard keymap to reduce layers.

* Re-vamped Iris keymap.

* changes

* minor keymap change

This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.

* Added Fourier keymap

* Keymap Cleanup

Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.

* Keymap Adjustments

Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.

* minor tweaks

Added code to disable red ProMicro LEDs after flashing.

* Clean-up

* Corrections to keymap.

Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.

* Changes to make this fall in line with the new Layout features

* Moving to LAYOUTs for 4x12 boards

* fixed config.h file

* standardization changes

* Reverted Atreus62 keymap to LAYOUT format

* Switch Preonic and Nyquist to ortho_5x12

* Corrections to config.h

* config.h file tweaks

* config.h file tweaks

* Updated info and fixed minor errors

* Updated folder name; overdue updates to keymap and readme files

Updated folder name; overdue updates to keymap and readme files

* Updated tri-layer feature

* Revert "Updated tri-layer feature"

This reverts commit 59b8b85761.

* Updated tri-layer on keymap

* Fixed typos